diff mbox

[v3] dmaengine: dmatest: add norandom option

Message ID 1517565069-19769-1-git-send-email-shunyong.yang@hxt-semitech.com (mailing list archive)
State Accepted
Headers show

Commit Message

Shunyong Yang Feb. 2, 2018, 9:51 a.m. UTC 
Existing option noverify disables both random src/dst address offset
setup and data verification. Sometimes, we need to control random
src/dst address setup and verification separately, such as disabling
random to make sure that test covers addresses in all interleaving
banks, but data verification is still performed.

This patch adds option norandom to disable random offset setup. Option
noverify has been changed to disable data verification only.

Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Signed-off-by: Yang Shunyong <shunyong.yang@hxt-semitech.com>
---

v3: new patch should be octal permissions.

v2: change to symbolic permissions.

---
 drivers/dma/dmatest.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

Comments

Vinod Koul Feb. 5, 2018, 5:41 a.m. UTC | #1 
On Fri, Feb 02, 2018 at 05:51:09PM +0800, Yang Shunyong wrote:
> Existing option noverify disables both random src/dst address offset
> setup and data verification. Sometimes, we need to control random
> src/dst address setup and verification separately, such as disabling
> random to make sure that test covers addresses in all interleaving
> banks, but data verification is still performed.
> 
> This patch adds option norandom to disable random offset setup. Option
> noverify has been changed to disable data verification only.

Applied, thanks
diff mbox

Patch

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 80cc2be6483c..b9339524d5bd 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -74,7 +74,11 @@ 
 
 static bool noverify;
 module_param(noverify, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(noverify, "Disable random data setup and verification");
+MODULE_PARM_DESC(noverify, "Disable data verification (default: verify)");
+
+static bool norandom;
+module_param(norandom, bool, 0644);
+MODULE_PARM_DESC(norandom, "Disable random offset setup (default: random)");
 
 static bool verbose;
 module_param(verbose, bool, S_IRUGO | S_IWUSR);
@@ -103,6 +107,7 @@  struct dmatest_params {
 	unsigned int	pq_sources;
 	int		timeout;
 	bool		noverify;
+	bool		norandom;
 };
 
 /**
@@ -575,7 +580,7 @@  static int dmatest_func(void *data)
 			break;
 		}
 
-		if (params->noverify)
+		if (params->norandom)
 			len = params->buf_size;
 		else
 			len = dmatest_random() % params->buf_size + 1;
@@ -586,17 +591,19 @@  static int dmatest_func(void *data)
 
 		total_len += len;
 
-		if (params->noverify) {
+		if (params->norandom) {
 			src_off = 0;
 			dst_off = 0;
 		} else {
-			start = ktime_get();
 			src_off = dmatest_random() % (params->buf_size - len + 1);
 			dst_off = dmatest_random() % (params->buf_size - len + 1);
 
 			src_off = (src_off >> align) << align;
 			dst_off = (dst_off >> align) << align;
+		}
 
+		if (!params->noverify) {
+			start = ktime_get();
 			dmatest_init_srcs(thread->srcs, src_off, len,
 					  params->buf_size, is_memset);
 			dmatest_init_dsts(thread->dsts, dst_off, len,
@@ -975,6 +982,7 @@  static void run_threaded_test(struct dmatest_info *info)
 	params->pq_sources = pq_sources;
 	params->timeout = timeout;
 	params->noverify = noverify;
+	params->norandom = norandom;
 
 	request_channels(info, DMA_MEMCPY);
 	request_channels(info, DMA_MEMSET);