diff mbox

[v1,1/1] dmaengine: stm32-dmamux: fix a potential buffer overflow

Message ID 1520960135-26575-1-git-send-email-pierre-yves.mordret@st.com (mailing list archive)
State Accepted
Headers show

Commit Message

Pierre Yves MORDRET March 13, 2018, 4:55 p.m. UTC 
The bitfield dma_inuse is allocated of size dma_requests bits, thus a
valid bit address is from 0 to (dma_requests - 1).
When find_first_zero_bit() fails, it returns dma_requests as invalid
address.
Using such address for the following set_bit() is incorrect and, if
dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer
overflow.
Currently this driver is only used in DT stm32h743.dtsi where a safe value
dma_requests=16 is not triggering the buffer overflow.

Fixed by checking the return value of find_first_zero_bit() _before_
using it.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
  Version history:
    v1:
       * Initial
---
---
 drivers/dma/stm32-dmamux.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

Comments

Vinod Koul March 22, 2018, 5:21 a.m. UTC | #1 
On Tue, Mar 13, 2018 at 05:55:35PM +0100, Pierre-Yves MORDRET wrote:
> The bitfield dma_inuse is allocated of size dma_requests bits, thus a
> valid bit address is from 0 to (dma_requests - 1).
> When find_first_zero_bit() fails, it returns dma_requests as invalid
> address.
> Using such address for the following set_bit() is incorrect and, if
> dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer
> overflow.
> Currently this driver is only used in DT stm32h743.dtsi where a safe value
> dma_requests=16 is not triggering the buffer overflow.
> 
> Fixed by checking the return value of find_first_zero_bit() _before_
> using it.

Applied, thanks
diff mbox

Patch

diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
index 4dbb30c..b922db9 100644
--- a/drivers/dma/stm32-dmamux.c
+++ b/drivers/dma/stm32-dmamux.c
@@ -118,14 +118,15 @@  static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
 	spin_lock_irqsave(&dmamux->lock, flags);
 	mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
 					   dmamux->dma_requests);
-	set_bit(mux->chan_id, dmamux->dma_inuse);
-	spin_unlock_irqrestore(&dmamux->lock, flags);
 
 	if (mux->chan_id == dmamux->dma_requests) {
+		spin_unlock_irqrestore(&dmamux->lock, flags);
 		dev_err(&pdev->dev, "Run out of free DMA requests\n");
 		ret = -ENOMEM;
-		goto error;
+		goto error_chan_id;
 	}
+	set_bit(mux->chan_id, dmamux->dma_inuse);
+	spin_unlock_irqrestore(&dmamux->lock, flags);
 
 	/* Look for DMA Master */
 	for (i = 1, min = 0, max = dmamux->dma_reqs[i];
@@ -173,6 +174,8 @@  static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
 
 error:
 	clear_bit(mux->chan_id, dmamux->dma_inuse);
+
+error_chan_id:
 	kfree(mux);
 	return ERR_PTR(ret);
 }