diff mbox series

dt-bindings: dmaengine: xilinx_dma: Remove DMA client binding

Message ID 1705650270-503536-1-git-send-email-radhey.shyam.pandey@amd.com (mailing list archive)
State Changes Requested
Headers show
Series dt-bindings: dmaengine: xilinx_dma: Remove DMA client binding | expand

Commit Message

Pandey, Radhey Shyam Jan. 19, 2024, 7:44 a.m. UTC
From: Abin Joseph <abin.joseph@amd.com>

It is not required to document dma consumer binding and its
example inside dma producer binding, so remove it.

Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
---
I am working on txt to yaml binding conversion and will send out
as followup patch.
---
 .../bindings/dma/xilinx/xilinx_dma.txt        | 23 -------------------
 1 file changed, 23 deletions(-)

Comments

Rob Herring Jan. 30, 2024, 6 p.m. UTC | #1
On Fri, Jan 19, 2024 at 01:14:30PM +0530, Radhey Shyam Pandey wrote:
> From: Abin Joseph <abin.joseph@amd.com>
> 
> It is not required to document dma consumer binding and its
> example inside dma producer binding, so remove it.
> 
> Signed-off-by: Abin Joseph <abin.joseph@amd.com>
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
> ---
> I am working on txt to yaml binding conversion and will send out
> as followup patch.

It is fine to just drop this in the conversion, but either way.

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  .../bindings/dma/xilinx/xilinx_dma.txt        | 23 -------------------
>  1 file changed, 23 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 590d1948f202..b567107270cb 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -109,26 +109,3 @@  axi_vdma_0: axivdma@40030000 {
 		xlnx,datawidth = <0x40>;
 	} ;
 } ;
-
-
-* DMA client
-
-Required properties:
-- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
-	where Channel ID is '0' for write/tx and '1' for read/rx
-	channel. For MCMDA, MM2S channel(write/tx) ID start from
-	'0' and is in [0-15] range. S2MM channel(read/rx) ID start
-	from '16' and is in [16-31] range. These channels ID are
-	fixed irrespective of IP configuration.
-
-- dma-names: a list of DMA channel names, one per "dmas" entry
-
-Example:
-++++++++
-
-vdmatest_0: vdmatest@0 {
-	compatible ="xlnx,axi-vdma-test-1.00.a";
-	dmas = <&axi_vdma_0 0
-		&axi_vdma_0 1>;
-	dma-names = "vdma0", "vdma1";
-} ;