diff mbox series

[v2,1/2] dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA

Message ID 1721740773-23181-2-git-send-email-quic_msarkar@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Fix unmasking interrupt bit and remove watermark interrupt enablement | expand

Commit Message

Mrinmay Sarkar July 23, 2024, 1:19 p.m. UTC
The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
bit. This is apparently masking those particular interrupts rather than
unmasking the same. If the interrupts are masked, they would never get
triggered.

So fix the issue by unmasking the STOP and ABORT interrupts properly.

Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
cc: stable@vger.kernel.org
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
---
 drivers/dma/dw-edma/dw-hdma-v0-core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Manivannan Sadhasivam July 25, 2024, 8:01 a.m. UTC | #1
On Tue, Jul 23, 2024 at 06:49:31PM +0530, Mrinmay Sarkar wrote:
> The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
> bit. This is apparently masking those particular interrupts rather than
> unmasking the same. If the interrupts are masked, they would never get
> triggered.
> 
> So fix the issue by unmasking the STOP and ABORT interrupts properly.
> 
> Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
> cc: stable@vger.kernel.org
> Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  drivers/dma/dw-edma/dw-hdma-v0-core.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> index 10e8f07..fa89b3a 100644
> --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
> +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> @@ -247,10 +247,11 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
>  	if (first) {
>  		/* Enable engine */
>  		SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
> -		/* Interrupt enable&unmask - done, abort */
> -		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) |
> -		      HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK |
> -		      HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
> +		/* Interrupt unmask - STOP, ABORT */
> +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) &
> +		      ~HDMA_V0_STOP_INT_MASK & ~HDMA_V0_ABORT_INT_MASK;
> +		/* Interrupt enable - STOP, ABORT */
> +		tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
>  		if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
>  			tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
>  		SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
> -- 
> 2.7.4
>
Serge Semin Aug. 1, 2024, 11:42 p.m. UTC | #2
On Tue, Jul 23, 2024 at 06:49:31PM +0530, Mrinmay Sarkar wrote:
> The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
> bit. This is apparently masking those particular interrupts rather than
> unmasking the same. If the interrupts are masked, they would never get
> triggered.
> 
> So fix the issue by unmasking the STOP and ABORT interrupts properly.
> 
> Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
> cc: stable@vger.kernel.org
> Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
> ---
>  drivers/dma/dw-edma/dw-hdma-v0-core.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> index 10e8f07..fa89b3a 100644
> --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
> +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> @@ -247,10 +247,11 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
>  	if (first) {
>  		/* Enable engine */
>  		SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
> -		/* Interrupt enable&unmask - done, abort */
> -		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) |
> -		      HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK |
> -		      HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;

Just curious, if all the interrupts were actually masked, how has this
been even working?.. In other words if it affected both local and
remote interrupts, then the HDMA driver has never actually worked,
right?

> +		/* Interrupt unmask - STOP, ABORT */

> +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) &
> +		      ~HDMA_V0_STOP_INT_MASK & ~HDMA_V0_ABORT_INT_MASK;

Please convert this to:
+		/* Interrupt unmask - stop, abort */
+		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup);
+		tmp &= ~(HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK);

-Serge(y)

> +		/* Interrupt enable - STOP, ABORT */
> +		tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
>  		if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
>  			tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
>  		SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
> -- 
> 2.7.4
>
Mrinmay Sarkar Aug. 5, 2024, 2 p.m. UTC | #3
On 8/2/2024 5:12 AM, Serge Semin wrote:
> On Tue, Jul 23, 2024 at 06:49:31PM +0530, Mrinmay Sarkar wrote:
>> The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
>> bit. This is apparently masking those particular interrupts rather than
>> unmasking the same. If the interrupts are masked, they would never get
>> triggered.
>>
>> So fix the issue by unmasking the STOP and ABORT interrupts properly.
>>
>> Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
>> cc: stable@vger.kernel.org
>> Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
>> ---
>>   drivers/dma/dw-edma/dw-hdma-v0-core.c | 9 +++++----
>>   1 file changed, 5 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
>> index 10e8f07..fa89b3a 100644
>> --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
>> +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
>> @@ -247,10 +247,11 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
>>   	if (first) {
>>   		/* Enable engine */
>>   		SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
>> -		/* Interrupt enable&unmask - done, abort */
>> -		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) |
>> -		      HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK |
>> -		      HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
> Just curious, if all the interrupts were actually masked, how has this
> been even working?.. In other words if it affected both local and
> remote interrupts, then the HDMA driver has never actually worked,
> right?

Agreed, it should not work as interrupts were masked.

But as we are enabling LIE/RIE bits (LWIE/RWIE) that eventually enabling 
watermark
interrupt in HDMA case and somehow on device I could see interrupt was
generating with watermark and stop bit set and it was working.
Since we were not clearing watermark interrupt, it was also causing 
storm of interrupt.

>> +		/* Interrupt unmask - STOP, ABORT */
>> +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) &
>> +		      ~HDMA_V0_STOP_INT_MASK & ~HDMA_V0_ABORT_INT_MASK;
> Please convert this to:
> +		/* Interrupt unmask - stop, abort */
> +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup);
> +		tmp &= ~(HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK);
>
> -Serge(y)

Sure. Will do

Thanks,
Mrinmay

>> +		/* Interrupt enable - STOP, ABORT */
>> +		tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
>>   		if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
>>   			tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
>>   		SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
>> -- 
>> 2.7.4
>>
Serge Semin Aug. 6, 2024, 10:56 p.m. UTC | #4
On Mon, Aug 05, 2024 at 07:30:14PM +0530, Mrinmay Sarkar wrote:
> 
> On 8/2/2024 5:12 AM, Serge Semin wrote:
> > On Tue, Jul 23, 2024 at 06:49:31PM +0530, Mrinmay Sarkar wrote:
> > > The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
> > > bit. This is apparently masking those particular interrupts rather than
> > > unmasking the same. If the interrupts are masked, they would never get
> > > triggered.
> > > 
> > > So fix the issue by unmasking the STOP and ABORT interrupts properly.
> > > 
> > > Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
> > > cc: stable@vger.kernel.org
> > > Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
> > > ---
> > >   drivers/dma/dw-edma/dw-hdma-v0-core.c | 9 +++++----
> > >   1 file changed, 5 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> > > index 10e8f07..fa89b3a 100644
> > > --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
> > > +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> > > @@ -247,10 +247,11 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> > >   	if (first) {
> > >   		/* Enable engine */
> > >   		SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
> > > -		/* Interrupt enable&unmask - done, abort */
> > > -		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) |
> > > -		      HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK |
> > > -		      HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
> > Just curious, if all the interrupts were actually masked, how has this
> > been even working?.. In other words if it affected both local and
> > remote interrupts, then the HDMA driver has never actually worked,
> > right?
> 

> Agreed, it should not work as interrupts were masked.
> 
> But as we are enabling LIE/RIE bits (LWIE/RWIE) that eventually enabling
> watermark
> interrupt in HDMA case and somehow on device I could see interrupt was
> generating with watermark and stop bit set and it was working.
> Since we were not clearing watermark interrupt, it was also causing storm of
> interrupt.

Is it possible that the HDMA_V0_STOP_INT_MASK and
HDMA_V0_ABORT_INT_MASK masks affect the local IRQs only? If so than
that shall explain why for instance Kory hasn't met the problem. 

Based on the "Interrupts and Error Handling" figures of the DW EDMA
databook the DMA_READ_INT_MASK_OFF/DMA_WRITE_INT_MASK_OFF CSRs mask of
the IRQ delivered via the edma_int[] wire. Meanwhile the IMWr TLPs
generation depend on the RIE/LLRAIE flags state only.

> 
> > > +		/* Interrupt unmask - STOP, ABORT */
> > > +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) &
> > > +		      ~HDMA_V0_STOP_INT_MASK & ~HDMA_V0_ABORT_INT_MASK;
> > Please convert this to:
> > +		/* Interrupt unmask - stop, abort */
> > +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup);
> > +		tmp &= ~(HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK);
> > 
> > -Serge(y)
> 
> Sure. Will do

Thanks.

-Serge(y)

> 
> Thanks,
> Mrinmay
> 
> > > +		/* Interrupt enable - STOP, ABORT */
> > > +		tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
> > >   		if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
> > >   			tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
> > >   		SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
> > > -- 
> > > 2.7.4
> > >
Mrinmay Sarkar Aug. 7, 2024, 5:19 p.m. UTC | #5
On 8/7/2024 4:26 AM, Serge Semin wrote:
> On Mon, Aug 05, 2024 at 07:30:14PM +0530, Mrinmay Sarkar wrote:
>> On 8/2/2024 5:12 AM, Serge Semin wrote:
>>> On Tue, Jul 23, 2024 at 06:49:31PM +0530, Mrinmay Sarkar wrote:
>>>> The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
>>>> bit. This is apparently masking those particular interrupts rather than
>>>> unmasking the same. If the interrupts are masked, they would never get
>>>> triggered.
>>>>
>>>> So fix the issue by unmasking the STOP and ABORT interrupts properly.
>>>>
>>>> Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
>>>> cc: stable@vger.kernel.org
>>>> Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
>>>> ---
>>>>    drivers/dma/dw-edma/dw-hdma-v0-core.c | 9 +++++----
>>>>    1 file changed, 5 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
>>>> index 10e8f07..fa89b3a 100644
>>>> --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
>>>> +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
>>>> @@ -247,10 +247,11 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
>>>>    	if (first) {
>>>>    		/* Enable engine */
>>>>    		SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
>>>> -		/* Interrupt enable&unmask - done, abort */
>>>> -		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) |
>>>> -		      HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK |
>>>> -		      HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
>>> Just curious, if all the interrupts were actually masked, how has this
>>> been even working?.. In other words if it affected both local and
>>> remote interrupts, then the HDMA driver has never actually worked,
>>> right?
>> Agreed, it should not work as interrupts were masked.
>>
>> But as we are enabling LIE/RIE bits (LWIE/RWIE) that eventually enabling
>> watermark
>> interrupt in HDMA case and somehow on device I could see interrupt was
>> generating with watermark and stop bit set and it was working.
>> Since we were not clearing watermark interrupt, it was also causing storm of
>> interrupt.
> Is it possible that the HDMA_V0_STOP_INT_MASK and
> HDMA_V0_ABORT_INT_MASK masks affect the local IRQs only? If so than
> that shall explain why for instance Kory hasn't met the problem.
>
> Based on the "Interrupts and Error Handling" figures of the DW EDMA
> databook the DMA_READ_INT_MASK_OFF/DMA_WRITE_INT_MASK_OFF CSRs mask of
> the IRQ delivered via the edma_int[] wire. Meanwhile the IMWr TLPs
> generation depend on the RIE/LLRAIE flags state only.
Ideally HDMA_V0_STOP_INT_MASK and HDMA_V0_ABORT_INT_MASK masks affect
both local and remote IRQs.

As per DW HDMA "Interrupts and Error Handling" figure 
HDMA_INT_SETUP_OFF_[WR|
RD] mask of the IRQ delivered via the edma_int[] wire.
And IMWr TLPs generation depend on 3 flags i.e HDMA_INT_SETUP_OFF_[WR|
RD].RSIE flag for stop IMWr, RWIE flag for watermark IMWr and 
HDMA_INT_SETUP_OFF_[WR|R
D].RAIE flag for abort IMWr generation.

Thanks,
Mrinmay
>>>> +		/* Interrupt unmask - STOP, ABORT */
>>>> +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) &
>>>> +		      ~HDMA_V0_STOP_INT_MASK & ~HDMA_V0_ABORT_INT_MASK;
>>> Please convert this to:
>>> +		/* Interrupt unmask - stop, abort */
>>> +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup);
>>> +		tmp &= ~(HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK);
>>>
>>> -Serge(y)
>> Sure. Will do
> Thanks.
>
> -Serge(y)
>
>> Thanks,
>> Mrinmay
>>
>>>> +		/* Interrupt enable - STOP, ABORT */
>>>> +		tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
>>>>    		if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
>>>>    			tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
>>>>    		SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
>>>> -- 
>>>> 2.7.4
>>>>
Serge Semin Aug. 8, 2024, 8:28 p.m. UTC | #6
On Wed, Aug 07, 2024 at 10:49:42PM +0530, Mrinmay Sarkar wrote:
> 
> On 8/7/2024 4:26 AM, Serge Semin wrote:
> > On Mon, Aug 05, 2024 at 07:30:14PM +0530, Mrinmay Sarkar wrote:
> > > On 8/2/2024 5:12 AM, Serge Semin wrote:
> > > > On Tue, Jul 23, 2024 at 06:49:31PM +0530, Mrinmay Sarkar wrote:
> > > > > The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
> > > > > bit. This is apparently masking those particular interrupts rather than
> > > > > unmasking the same. If the interrupts are masked, they would never get
> > > > > triggered.
> > > > > 
> > > > > So fix the issue by unmasking the STOP and ABORT interrupts properly.
> > > > > 
> > > > > Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
> > > > > cc: stable@vger.kernel.org
> > > > > Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
> > > > > ---
> > > > >    drivers/dma/dw-edma/dw-hdma-v0-core.c | 9 +++++----
> > > > >    1 file changed, 5 insertions(+), 4 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> > > > > index 10e8f07..fa89b3a 100644
> > > > > --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
> > > > > +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
> > > > > @@ -247,10 +247,11 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> > > > >    	if (first) {
> > > > >    		/* Enable engine */
> > > > >    		SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
> > > > > -		/* Interrupt enable&unmask - done, abort */
> > > > > -		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) |
> > > > > -		      HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK |
> > > > > -		      HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
> > > > Just curious, if all the interrupts were actually masked, how has this
> > > > been even working?.. In other words if it affected both local and
> > > > remote interrupts, then the HDMA driver has never actually worked,
> > > > right?
> > > Agreed, it should not work as interrupts were masked.
> > > 
> > > But as we are enabling LIE/RIE bits (LWIE/RWIE) that eventually enabling
> > > watermark
> > > interrupt in HDMA case and somehow on device I could see interrupt was
> > > generating with watermark and stop bit set and it was working.
> > > Since we were not clearing watermark interrupt, it was also causing storm of
> > > interrupt.
> > Is it possible that the HDMA_V0_STOP_INT_MASK and
> > HDMA_V0_ABORT_INT_MASK masks affect the local IRQs only? If so than
> > that shall explain why for instance Kory hasn't met the problem.
> > 
> > Based on the "Interrupts and Error Handling" figures of the DW EDMA
> > databook the DMA_READ_INT_MASK_OFF/DMA_WRITE_INT_MASK_OFF CSRs mask of
> > the IRQ delivered via the edma_int[] wire. Meanwhile the IMWr TLPs
> > generation depend on the RIE/LLRAIE flags state only.
> Ideally HDMA_V0_STOP_INT_MASK and HDMA_V0_ABORT_INT_MASK masks affect
> both local and remote IRQs.
> 

> As per DW HDMA "Interrupts and Error Handling" figure
> HDMA_INT_SETUP_OFF_[WR|
> RD] mask of the IRQ delivered via the edma_int[] wire.

So it means they indeed affect the Local IRQs only, since the
edma_int[] wire is the line locally connected to the host IRQ
controller. From that perspective the semantics is the same as of
the DMA_READ_INT_MASK_OFF/DMA_WRITE_INT_MASK_OFF CSR masks.

Thanks for clarification.

> And IMWr TLPs generation depend on 3 flags i.e HDMA_INT_SETUP_OFF_[WR|
> RD].RSIE flag for stop IMWr, RWIE flag for watermark IMWr and
> HDMA_INT_SETUP_OFF_[WR|R
> D].RAIE flag for abort IMWr generation.
> 
> Thanks,
> Mrinmay
> > > > > +		/* Interrupt unmask - STOP, ABORT */
> > > > > +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) &
> > > > > +		      ~HDMA_V0_STOP_INT_MASK & ~HDMA_V0_ABORT_INT_MASK;
> > > > Please convert this to:
> > > > +		/* Interrupt unmask - stop, abort */
> > > > +		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup);
> > > > +		tmp &= ~(HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK);
> > > > 
> > > > -Serge(y)
> > > Sure. Will do

I'll wait v3 to finish up the review.

-Serge(y)

> > Thanks.
> > 
> > -Serge(y)
> > 
> > > Thanks,
> > > Mrinmay
> > > 
> > > > > +		/* Interrupt enable - STOP, ABORT */
> > > > > +		tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
> > > > >    		if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
> > > > >    			tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
> > > > >    		SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);
> > > > > -- 
> > > > > 2.7.4
> > > > >
diff mbox series

Patch

diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
index 10e8f07..fa89b3a 100644
--- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
@@ -247,10 +247,11 @@  static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
 	if (first) {
 		/* Enable engine */
 		SET_CH_32(dw, chan->dir, chan->id, ch_en, BIT(0));
-		/* Interrupt enable&unmask - done, abort */
-		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) |
-		      HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK |
-		      HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
+		/* Interrupt unmask - STOP, ABORT */
+		tmp = GET_CH_32(dw, chan->dir, chan->id, int_setup) &
+		      ~HDMA_V0_STOP_INT_MASK & ~HDMA_V0_ABORT_INT_MASK;
+		/* Interrupt enable - STOP, ABORT */
+		tmp |= HDMA_V0_LOCAL_STOP_INT_EN | HDMA_V0_LOCAL_ABORT_INT_EN;
 		if (!(dw->chip->flags & DW_EDMA_CHIP_LOCAL))
 			tmp |= HDMA_V0_REMOTE_STOP_INT_EN | HDMA_V0_REMOTE_ABORT_INT_EN;
 		SET_CH_32(dw, chan->dir, chan->id, int_setup, tmp);