@@ -950,7 +950,7 @@ msi:
pci_disable_msi(pdev);
goto intx;
}
- device->irq_mode = IOAT_MSIX;
+ device->irq_mode = IOAT_MSI;
goto done;
intx:
@@ -1630,45 +1630,36 @@ static int ioat3_dma_self_test(struct ioatdma_device *device)
static int ioat3_irq_reinit(struct ioatdma_device *device)
{
- int msixcnt = device->common.chancnt;
struct pci_dev *pdev = device->pdev;
- int i;
- struct msix_entry *msix;
- struct ioat_chan_common *chan;
- int err = 0;
+ int irq = pdev->irq, i;
+
+ if (!is_bwd_ioat(pdev))
+ return 0;
switch (device->irq_mode) {
case IOAT_MSIX:
+ for (i = 0; i < device->common.chancnt; i++) {
+ struct msix_entry *msix = &device->msix_entries[i];
+ struct ioat_chan_common *chan;
- for (i = 0; i < msixcnt; i++) {
- msix = &device->msix_entries[i];
chan = ioat_chan_by_index(device, i);
devm_free_irq(&pdev->dev, msix->vector, chan);
}
pci_disable_msix(pdev);
break;
-
case IOAT_MSI:
- chan = ioat_chan_by_index(device, 0);
- devm_free_irq(&pdev->dev, pdev->irq, chan);
pci_disable_msi(pdev);
- break;
-
+ /* fall through */
case IOAT_INTX:
- chan = ioat_chan_by_index(device, 0);
- devm_free_irq(&pdev->dev, pdev->irq, chan);
+ devm_free_irq(&pdev->dev, irq, device);
break;
-
default:
return 0;
}
-
device->irq_mode = IOAT_NOIRQ;
- err = ioat_dma_setup_interrupts(device);
-
- return err;
+ return ioat_dma_setup_interrupts(device);
}
static int ioat3_reset_hw(struct ioat_chan_common *chan)
@@ -1711,14 +1702,12 @@ static int ioat3_reset_hw(struct ioat_chan_common *chan)
}
err = ioat2_reset_sync(chan, msecs_to_jiffies(200));
- if (err) {
- dev_err(&pdev->dev, "Failed to reset!\n");
- return err;
- }
-
- if (device->irq_mode != IOAT_NOIRQ && is_bwd_ioat(pdev))
+ if (!err)
err = ioat3_irq_reinit(device);
+ if (err)
+ dev_err(&pdev->dev, "Failed to reset: %d\n", err);
+
return err;
}
The implementation of ioat3_irq_reinit has two bugs: 1/ The mode is incorrectly set to MSIX for the MSI case 2/ The 'dev_id' parameter to free_irq is the ioatdma_device not the channel in the msi and intx case Include a small cleanup to clarify that ioat3_irq_reinit is only for bwd hardware Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> --- drivers/dma/ioat/dma.c | 2 +- drivers/dma/ioat/dma_v3.c | 39 ++++++++++++++------------------------- 2 files changed, 15 insertions(+), 26 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html