diff mbox series

[v4,4/7] dmaengine: xilinx_dma: program hardware supported buffer length

Message ID 20180802141012.19970-4-andrea.merello@gmail.com (mailing list archive)
State Changes Requested
Headers show
Series [v4,1/7] dmaengine: xilinx_dma: commonize DMA copy size calculation | expand

Commit Message

Andrea Merello Aug. 2, 2018, 2:10 p.m. UTC 
From: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>

AXI-DMA IP supports configurable (c_sg_length_width) buffer length
register width, hence read buffer length (xlnx,sg-length-width) DT
property and ensure that driver doesn't program buffer length
exceeding the supported limit. For VDMA and CDMA there is no change.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com> [rebase, reword]
---
Changes in v2:
        - drop original patch and replace with the one in Xilinx tree
Changes in v3:
	- cc DT maintainers/ML
Changes in v4:
	- upper bound for the property should be 26, not 23
	- add warn for width > 23 as per xilinx original patch
	- rework due to changes introduced in 1/6
---
 drivers/dma/xilinx/xilinx_dma.c | 36 +++++++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index aaa6de8a70e4..b17f24e4ec35 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -158,7 +158,9 @@ 
 #define XILINX_DMA_REG_BTT		0x28
 
 /* AXI DMA Specific Masks/Bit fields */
-#define XILINX_DMA_MAX_TRANS_LEN	GENMASK(22, 0)
+#define XILINX_DMA_MAX_TRANS_LEN_MIN	8
+#define XILINX_DMA_MAX_TRANS_LEN_MAX	23
+#define XILINX_DMA_V2_MAX_TRANS_LEN_MAX	26
 #define XILINX_DMA_CR_COALESCE_MAX	GENMASK(23, 16)
 #define XILINX_DMA_CR_CYCLIC_BD_EN_MASK	BIT(4)
 #define XILINX_DMA_CR_COALESCE_SHIFT	16
@@ -418,6 +420,7 @@  struct xilinx_dma_config {
  * @rxs_clk: DMA s2mm stream clock
  * @nr_channels: Number of channels DMA device supports
  * @chan_id: DMA channel identifier
+ * @max_buffer_len: Max buffer length
  */
 struct xilinx_dma_device {
 	void __iomem *regs;
@@ -437,6 +440,7 @@  struct xilinx_dma_device {
 	struct clk *rxs_clk;
 	u32 nr_channels;
 	u32 chan_id;
+	u32 max_buffer_len;
 };
 
 /* Macros */
@@ -964,7 +968,7 @@  static int xilinx_dma_calc_copysize(struct xilinx_dma_chan *chan,
 				    int size, int done)
 {
 	size_t copy = min_t(size_t, size - done,
-		     XILINX_DMA_MAX_TRANS_LEN);
+			    chan->xdev->max_buffer_len);
 
 	if ((copy + done < size) &&
 	    chan->xdev->common.copy_align) {
@@ -1011,7 +1015,7 @@  static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
 			list_for_each_entry(segment, &desc->segments, node) {
 				hw = &segment->hw;
 				residue += (hw->control - hw->status) &
-					   XILINX_DMA_MAX_TRANS_LEN;
+					   chan->xdev->max_buffer_len;
 			}
 		}
 		spin_unlock_irqrestore(&chan->lock, flags);
@@ -1263,7 +1267,7 @@  static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
 
 		/* Start the transfer */
 		dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
-				hw->control & XILINX_DMA_MAX_TRANS_LEN);
+				hw->control & chan->xdev->max_buffer_len);
 	}
 
 	list_splice_tail_init(&chan->pending_list, &chan->active_list);
@@ -1366,7 +1370,7 @@  static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
 
 		/* Start the transfer */
 		dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
-			       hw->control & XILINX_DMA_MAX_TRANS_LEN);
+			       hw->control & chan->xdev->max_buffer_len);
 	}
 
 	list_splice_tail_init(&chan->pending_list, &chan->active_list);
@@ -1727,7 +1731,7 @@  xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
 	struct xilinx_cdma_tx_segment *segment;
 	struct xilinx_cdma_desc_hw *hw;
 
-	if (!len || len > XILINX_DMA_MAX_TRANS_LEN)
+	if (!len || len > chan->xdev->max_buffer_len)
 		return NULL;
 
 	desc = xilinx_dma_alloc_tx_descriptor(chan);
@@ -2596,7 +2600,7 @@  static int xilinx_dma_probe(struct platform_device *pdev)
 	struct xilinx_dma_device *xdev;
 	struct device_node *child, *np = pdev->dev.of_node;
 	struct resource *io;
-	u32 num_frames, addr_width;
+	u32 num_frames, addr_width, len_width;
 	int i, err;
 
 	/* Allocate and initialize the DMA engine structure */
@@ -2628,8 +2632,24 @@  static int xilinx_dma_probe(struct platform_device *pdev)
 
 	/* Retrieve the DMA engine properties from the device tree */
 	xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg");
-	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
+	xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
+
+	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		xdev->mcdma = of_property_read_bool(node, "xlnx,mcdma");
+		if (!of_property_read_u32(node, "xlnx,sg-length-width",
+					  &len_width)) {
+			if (len_width < XILINX_DMA_MAX_TRANS_LEN_MIN ||
+			    len_width > XILINX_DMA_V2_MAX_TRANS_LEN_MAX) {
+				dev_warn(xdev->dev,
+					 "invalid xlnx,sg-length-width property value. Using default width\n");
+			} else {
+				if (len_width > XILINX_DMA_MAX_TRANS_LEN_MAX)
+					dev_warn(xdev->dev, "Please ensure that IP supports buffer length > 23 bits\n");
+				xdev->max_buffer_len =
+					GENMASK(len_width - 1, 0);
+			}
+		}
+	}
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		err = of_property_read_u32(node, "xlnx,num-fstores",