diff mbox series

[01/12] dmaengine: at_hdmac: remove dma_slave_config direction usage

Message ID 20180911083536.16482-2-vkoul@kernel.org (mailing list archive)
State Accepted
Headers show
Series dmaengine: remove usage of dma_slave_config direction | expand

Commit Message

Vinod Koul Sept. 11, 2018, 8:35 a.m. UTC
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
CC: Ludovic Desroches <ludovic.desroches@microchip.com>

 drivers/dma/at_hdmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Ludovic Desroches Sept. 13, 2018, 8:23 a.m. UTC | #1
On Tue, Sep 11, 2018 at 02:05:25PM +0530, Vinod Koul wrote:
> dma_slave_config direction was marked as deprecated quite some
> time back, remove the usage from this driver so that the field
> can be removed
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>

> ---
> CC: Ludovic Desroches <ludovic.desroches@microchip.com>
> 
>  drivers/dma/at_hdmac.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index 75f38d19fcbe..7cbac6e8c113 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -1320,7 +1320,7 @@ atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
>  	if (unlikely(!is_slave_direction(direction)))
>  		goto err_out;
>  
> -	if (sconfig->direction == DMA_MEM_TO_DEV)
> +	if (direction == DMA_MEM_TO_DEV)
>  		reg_width = convert_buswidth(sconfig->dst_addr_width);
>  	else
>  		reg_width = convert_buswidth(sconfig->src_addr_width);
> -- 
> 2.14.4
>
diff mbox series

Patch

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 75f38d19fcbe..7cbac6e8c113 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -1320,7 +1320,7 @@  atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 	if (unlikely(!is_slave_direction(direction)))
 		goto err_out;
 
-	if (sconfig->direction == DMA_MEM_TO_DEV)
+	if (direction == DMA_MEM_TO_DEV)
 		reg_width = convert_buswidth(sconfig->dst_addr_width);
 	else
 		reg_width = convert_buswidth(sconfig->src_addr_width);