From patchwork Thu Jul 30 15:45:45 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 11693349 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C709B14B7 for ; Thu, 30 Jul 2020 15:46:08 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id BA92D20842 for ; Thu, 30 Jul 2020 15:46:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729998AbgG3PqB (ORCPT ); Thu, 30 Jul 2020 11:46:01 -0400 Received: from mail.baikalelectronics.com ([87.245.175.226]:57422 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729962AbgG3PqA (ORCPT ); Thu, 30 Jul 2020 11:46:00 -0400 Received: from localhost (unknown [127.0.0.1]) by mail.baikalelectronics.ru (Postfix) with ESMTP id 314A480045E5; Thu, 30 Jul 2020 15:45:56 +0000 (UTC) X-Virus-Scanned: amavisd-new at baikalelectronics.ru Received: from mail.baikalelectronics.ru ([127.0.0.1]) by localhost (mail.baikalelectronics.ru [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id aBeM2cVMX9sW; Thu, 30 Jul 2020 18:45:55 +0300 (MSK) From: Serge Semin To: Vinod Koul , Viresh Kumar , Andy Shevchenko , Dan Williams CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Peter Ujfalusi , Andy Shevchenko , Rob Herring , , , Subject: [PATCH 5/5] dmaengine: dw: Add DMA-channels mask cell support Date: Thu, 30 Jul 2020 18:45:45 +0300 Message-ID: <20200730154545.3965-6-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20200730154545.3965-1-Sergey.Semin@baikalelectronics.ru> References: <20200730154545.3965-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Sender: dmaengine-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: dmaengine@vger.kernel.org DW DMA IP-core provides a way to synthesize the DMA controller with channels having different parameters like maximum burst-length, multi-block support, maximum data width, etc. Those parameters both explicitly and implicitly affect the channels performance. Since DMA slave devices might be very demanding to the DMA performance, let's provide a functionality for the slaves to be assigned with DW DMA channels, which performance according to the platform engineer fulfill their requirements. After this patch is applied it can be done by passing the mask of suitable DMA-channels either directly in the dw_dma_slave structure instance or as a fifth cell of the DMA DT-property. If mask is zero or not provided, then there is no limitation on the channels allocation. For instance Baikal-T1 SoC is equipped with a DW DMAC engine, which first two channels are synthesized with max burst length of 16, while the rest of the channels have been created with max-burst-len=4. It would seem that the first two channels must be faster than the others and should be more preferable for the time-critical DMA slave devices. In practice it turned out that the situation is quite the opposite. The channels with max-burst-len=4 demonstrated a better performance than the channels with max-burst-len=16 even when they both had been initialized with the same settings. The performance drop of the first two DMA-channels made them unsuitable for the DW APB SSI slave device. No matter what settings they are configured with, full-duplex SPI transfers occasionally experience the Rx FIFO overflow. It means that the DMA-engine doesn't keep up with incoming data pace even though the SPI-bus is enabled with speed of 25MHz while the DW DMA controller is clocked with 50MHz signal. There is no such problem has been noticed for the channels synthesized with max-burst-len=4. Signed-off-by: Serge Semin --- drivers/dma/dw/core.c | 4 ++++ drivers/dma/dw/of.c | 7 +++++-- include/linux/platform_data/dma-dw.h | 3 +++ 3 files changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index 3da0aea9fe25..5f7b9badb965 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -772,6 +772,10 @@ bool dw_dma_filter(struct dma_chan *chan, void *param) if (dws->dma_dev != chan->device->dev) return false; + /* permit channels in accordance with the channels mask */ + if (dws->channels && !(dws->channels & dwc->mask)) + return false; + /* We have to copy data since dws can be temporary storage */ memcpy(&dwc->dws, dws, sizeof(struct dw_dma_slave)); diff --git a/drivers/dma/dw/of.c b/drivers/dma/dw/of.c index 1474b3817ef4..abdf22b269b5 100644 --- a/drivers/dma/dw/of.c +++ b/drivers/dma/dw/of.c @@ -22,18 +22,21 @@ static struct dma_chan *dw_dma_of_xlate(struct of_phandle_args *dma_spec, }; dma_cap_mask_t cap; - if (dma_spec->args_count != 3) + if (dma_spec->args_count < 3 || dma_spec->args_count > 4) return NULL; slave.src_id = dma_spec->args[0]; slave.dst_id = dma_spec->args[0]; slave.m_master = dma_spec->args[1]; slave.p_master = dma_spec->args[2]; + if (dma_spec->args_count >= 4) + slave.channels = dma_spec->args[3]; if (WARN_ON(slave.src_id >= DW_DMA_MAX_NR_REQUESTS || slave.dst_id >= DW_DMA_MAX_NR_REQUESTS || slave.m_master >= dw->pdata->nr_masters || - slave.p_master >= dw->pdata->nr_masters)) + slave.p_master >= dw->pdata->nr_masters || + fls(slave.channels) > dw->pdata->nr_channels)) return NULL; dma_cap_zero(cap); diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index 4f681df85c27..3bc48451a70c 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -23,6 +23,8 @@ * @dst_id: dst request line * @m_master: memory master for transfers on allocated channel * @p_master: peripheral master for transfers on allocated channel + * @channels: mask of the channels permitted for allocation (zero + * value means any) * @hs_polarity:set active low polarity of handshake interface */ struct dw_dma_slave { @@ -31,6 +33,7 @@ struct dw_dma_slave { u8 dst_id; u8 m_master; u8 p_master; + u8 channels; bool hs_polarity; };