diff mbox series

[v9,9/9] PCI: endpoint: Add embedded DMA controller test

Message ID 20220422143643.727871-10-Frank.Li@nxp.com (mailing list archive)
State Superseded
Headers show
Series Enable designware PCI EP EDMA locally | expand

Commit Message

Frank Li April 22, 2022, 2:36 p.m. UTC
Designware provided eDMA support in controller. This enabled use
this eDMA controller to transfer data.

The whole flow align with standard DMA usage module

1. Using dma_request_channel() and filter function to find correct
RX and TX Channel.
2. dmaengine_slave_config() config remote side physcial address.
3. using dmaengine_prep_slave_single() create transfer descriptor
4. tx_submit();
5. dma_async_issue_pending();

Tested at i.MX8DXL platform.

root@imx8qmmek:~# /usr/bin/pcitest -d -w
WRITE ( 102400 bytes):          OKAY
root@imx8qmmek:~# /usr/bin/pcitest -d -r
READ ( 102400 bytes):           OKAY

WRITE => Size: 102400 bytes DMA: YES  Time: 0.000180145 seconds Rate: 555108 KB/s
READ => Size: 102400 bytes  DMA: YES  Time: 0.000194397 seconds Rate: 514411 KB/s

READ => Size: 102400 bytes  DMA: NO   Time: 0.013532597 seconds Rate: 7389 KB/s
WRITE => Size: 102400 bytes DMA: NO   Time: 0.000857090 seconds Rate: 116673 KB/s

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v6 to v9:
 - none
Change from v5 to v6:
 - change subject
Change from v4 to v5:
 - none
Change from v3 to v4:
 - reverse Xmas tree order
 - local -> dma_local
 - change error message
 - IS_ERR -> IS_ERR_OR_NULL
 - check return value of dmaengine_slave_config()
Change from v1 to v2:
 - none

 drivers/pci/endpoint/functions/pci-epf-test.c | 108 ++++++++++++++++--
 1 file changed, 98 insertions(+), 10 deletions(-)

Comments

Manivannan Sadhasivam April 23, 2022, 12:20 p.m. UTC | #1
On Fri, Apr 22, 2022 at 09:36:43AM -0500, Frank Li wrote:
> Designware provided eDMA support in controller. This enabled use
> this eDMA controller to transfer data.
> 
> The whole flow align with standard DMA usage module
> 
> 1. Using dma_request_channel() and filter function to find correct
> RX and TX Channel.
> 2. dmaengine_slave_config() config remote side physcial address.
> 3. using dmaengine_prep_slave_single() create transfer descriptor
> 4. tx_submit();
> 5. dma_async_issue_pending();
> 
> Tested at i.MX8DXL platform.
> 
> root@imx8qmmek:~# /usr/bin/pcitest -d -w
> WRITE ( 102400 bytes):          OKAY
> root@imx8qmmek:~# /usr/bin/pcitest -d -r
> READ ( 102400 bytes):           OKAY
> 
> WRITE => Size: 102400 bytes DMA: YES  Time: 0.000180145 seconds Rate: 555108 KB/s
> READ => Size: 102400 bytes  DMA: YES  Time: 0.000194397 seconds Rate: 514411 KB/s
> 
> READ => Size: 102400 bytes  DMA: NO   Time: 0.013532597 seconds Rate: 7389 KB/s
> WRITE => Size: 102400 bytes DMA: NO   Time: 0.000857090 seconds Rate: 116673 KB/s
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Patch looks good to me but I cannot test it on my platform. So,

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
> Change from v6 to v9:
>  - none
> Change from v5 to v6:
>  - change subject
> Change from v4 to v5:
>  - none
> Change from v3 to v4:
>  - reverse Xmas tree order
>  - local -> dma_local
>  - change error message
>  - IS_ERR -> IS_ERR_OR_NULL
>  - check return value of dmaengine_slave_config()
> Change from v1 to v2:
>  - none
> 
>  drivers/pci/endpoint/functions/pci-epf-test.c | 108 ++++++++++++++++--
>  1 file changed, 98 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> index 90d84d3bc868f..f26afd02f3a86 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> @@ -52,9 +52,11 @@ struct pci_epf_test {
>  	enum pci_barno		test_reg_bar;
>  	size_t			msix_table_offset;
>  	struct delayed_work	cmd_handler;
> -	struct dma_chan		*dma_chan;
> +	struct dma_chan		*dma_chan_tx;
> +	struct dma_chan		*dma_chan_rx;
>  	struct completion	transfer_complete;
>  	bool			dma_supported;
> +	bool			dma_private;
>  	const struct pci_epc_features *epc_features;
>  };
>  
> @@ -105,12 +107,15 @@ static void pci_epf_test_dma_callback(void *param)
>   */
>  static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
>  				      dma_addr_t dma_dst, dma_addr_t dma_src,
> -				      size_t len)
> +				      size_t len, dma_addr_t dma_remote,
> +				      enum dma_transfer_direction dir)
>  {
> +	struct dma_chan *chan = (dir == DMA_DEV_TO_MEM) ? epf_test->dma_chan_tx : epf_test->dma_chan_rx;
> +	dma_addr_t dma_local = (dir == DMA_MEM_TO_DEV) ? dma_src : dma_dst;
>  	enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
> -	struct dma_chan *chan = epf_test->dma_chan;
>  	struct pci_epf *epf = epf_test->epf;
>  	struct dma_async_tx_descriptor *tx;
> +	struct dma_slave_config sconf = {};
>  	struct device *dev = &epf->dev;
>  	dma_cookie_t cookie;
>  	int ret;
> @@ -120,7 +125,22 @@ static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
>  		return -EINVAL;
>  	}
>  
> -	tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
> +	if (epf_test->dma_private) {
> +		sconf.direction = dir;
> +		if (dir == DMA_MEM_TO_DEV)
> +			sconf.dst_addr = dma_remote;
> +		else
> +			sconf.src_addr = dma_remote;
> +
> +		if (dmaengine_slave_config(chan, &sconf)) {
> +			dev_err(dev, "DMA slave config fail\n");
> +			return -EIO;
> +		}
> +		tx = dmaengine_prep_slave_single(chan, dma_local, len, dir, flags);
> +	} else {
> +		tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
> +	}
> +
>  	if (!tx) {
>  		dev_err(dev, "Failed to prepare DMA memcpy\n");
>  		return -EIO;
> @@ -148,6 +168,23 @@ static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
>  	return 0;
>  }
>  
> +struct epf_dma_filter {
> +	struct device *dev;
> +	u32 dma_mask;
> +};
> +
> +static bool epf_dma_filter_fn(struct dma_chan *chan, void *node)
> +{
> +	struct epf_dma_filter *filter = node;
> +	struct dma_slave_caps caps;
> +
> +	memset(&caps, 0, sizeof(caps));
> +	dma_get_slave_caps(chan, &caps);
> +
> +	return chan->device->dev == filter->dev
> +		&& (filter->dma_mask & caps.directions);
> +}
> +
>  /**
>   * pci_epf_test_init_dma_chan() - Function to initialize EPF test DMA channel
>   * @epf_test: the EPF test device that performs data transfer operation
> @@ -158,10 +195,44 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
>  {
>  	struct pci_epf *epf = epf_test->epf;
>  	struct device *dev = &epf->dev;
> +	struct epf_dma_filter filter;
>  	struct dma_chan *dma_chan;
>  	dma_cap_mask_t mask;
>  	int ret;
>  
> +	filter.dev = epf->epc->dev.parent;
> +	filter.dma_mask = BIT(DMA_DEV_TO_MEM);
> +
> +	dma_cap_zero(mask);
> +	dma_cap_set(DMA_SLAVE, mask);
> +	dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
> +	if (IS_ERR_OR_NULL(dma_chan)) {
> +		dev_info(dev, "Failed to get private DMA channel. Falling back to generic one\n");
> +		goto fail_back_tx;
> +	}
> +
> +	epf_test->dma_chan_rx = dma_chan;
> +
> +	filter.dma_mask = BIT(DMA_MEM_TO_DEV);
> +	dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
> +
> +	if (IS_ERR(dma_chan)) {
> +		dev_info(dev, "Failed to get private DMA channel. Falling back to generic one\n");
> +		goto fail_back_rx;
> +	}
> +
> +	epf_test->dma_chan_tx = dma_chan;
> +	epf_test->dma_private = true;
> +
> +	init_completion(&epf_test->transfer_complete);
> +
> +	return 0;
> +
> +fail_back_rx:
> +	dma_release_channel(epf_test->dma_chan_rx);
> +	epf_test->dma_chan_tx = NULL;
> +
> +fail_back_tx:
>  	dma_cap_zero(mask);
>  	dma_cap_set(DMA_MEMCPY, mask);
>  
> @@ -174,7 +245,7 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
>  	}
>  	init_completion(&epf_test->transfer_complete);
>  
> -	epf_test->dma_chan = dma_chan;
> +	epf_test->dma_chan_tx = epf_test->dma_chan_rx = dma_chan;
>  
>  	return 0;
>  }
> @@ -190,8 +261,17 @@ static void pci_epf_test_clean_dma_chan(struct pci_epf_test *epf_test)
>  	if (!epf_test->dma_supported)
>  		return;
>  
> -	dma_release_channel(epf_test->dma_chan);
> -	epf_test->dma_chan = NULL;
> +	dma_release_channel(epf_test->dma_chan_tx);
> +	if (epf_test->dma_chan_tx == epf_test->dma_chan_rx) {
> +		epf_test->dma_chan_tx = NULL;
> +		epf_test->dma_chan_rx = NULL;
> +		return;
> +	}
> +
> +	dma_release_channel(epf_test->dma_chan_rx);
> +	epf_test->dma_chan_rx = NULL;
> +
> +	return;
>  }
>  
>  static void pci_epf_test_print_rate(const char *ops, u64 size,
> @@ -280,8 +360,14 @@ static int pci_epf_test_copy(struct pci_epf_test *epf_test)
>  			goto err_map_addr;
>  		}
>  
> +		if (epf_test->dma_private) {
> +			dev_err(dev, "Cannot transfer data using DMA\n");
> +			ret = -EINVAL;
> +			goto err_map_addr;
> +		}
> +
>  		ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
> -						 src_phys_addr, reg->size);
> +						 src_phys_addr, reg->size, 0, DMA_MEM_TO_MEM);
>  		if (ret)
>  			dev_err(dev, "Data transfer failed\n");
>  	} else {
> @@ -363,7 +449,8 @@ static int pci_epf_test_read(struct pci_epf_test *epf_test)
>  
>  		ktime_get_ts64(&start);
>  		ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
> -						 phys_addr, reg->size);
> +						 phys_addr, reg->size,
> +						 reg->src_addr, DMA_DEV_TO_MEM);
>  		if (ret)
>  			dev_err(dev, "Data transfer failed\n");
>  		ktime_get_ts64(&end);
> @@ -453,8 +540,9 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
>  		}
>  
>  		ktime_get_ts64(&start);
> +
>  		ret = pci_epf_test_data_transfer(epf_test, phys_addr,
> -						 src_phys_addr, reg->size);
> +						 src_phys_addr, reg->size, reg->dst_addr, DMA_MEM_TO_DEV);
>  		if (ret)
>  			dev_err(dev, "Data transfer failed\n");
>  		ktime_get_ts64(&end);
> -- 
> 2.35.1
>
Lorenzo Pieralisi April 27, 2022, 9:30 a.m. UTC | #2
On Fri, Apr 22, 2022 at 09:36:43AM -0500, Frank Li wrote:
> Designware provided eDMA support in controller. This enabled use
> this eDMA controller to transfer data.
> 
> The whole flow align with standard DMA usage module
> 
> 1. Using dma_request_channel() and filter function to find correct
> RX and TX Channel.
> 2. dmaengine_slave_config() config remote side physcial address.
> 3. using dmaengine_prep_slave_single() create transfer descriptor
> 4. tx_submit();
> 5. dma_async_issue_pending();
> 
> Tested at i.MX8DXL platform.
> 
> root@imx8qmmek:~# /usr/bin/pcitest -d -w
> WRITE ( 102400 bytes):          OKAY
> root@imx8qmmek:~# /usr/bin/pcitest -d -r
> READ ( 102400 bytes):           OKAY
> 
> WRITE => Size: 102400 bytes DMA: YES  Time: 0.000180145 seconds Rate: 555108 KB/s
> READ => Size: 102400 bytes  DMA: YES  Time: 0.000194397 seconds Rate: 514411 KB/s
> 
> READ => Size: 102400 bytes  DMA: NO   Time: 0.013532597 seconds Rate: 7389 KB/s
> WRITE => Size: 102400 bytes DMA: NO   Time: 0.000857090 seconds Rate: 116673 KB/s
> 

You should rewrite this commit log.

1) this is not Designware specific
2) On what platforms you tested is information for a cover letter but
   not very useful for a commit log
3) The commit log describes why you need the patch and what the patch
   does.
   It can be a one liner: "Enable DMA controller tests for endpoints with
   DMA capabilities". Or something along those lines.

Lorenzo

> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> Change from v6 to v9:
>  - none
> Change from v5 to v6:
>  - change subject
> Change from v4 to v5:
>  - none
> Change from v3 to v4:
>  - reverse Xmas tree order
>  - local -> dma_local
>  - change error message
>  - IS_ERR -> IS_ERR_OR_NULL
>  - check return value of dmaengine_slave_config()
> Change from v1 to v2:
>  - none
> 
>  drivers/pci/endpoint/functions/pci-epf-test.c | 108 ++++++++++++++++--
>  1 file changed, 98 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> index 90d84d3bc868f..f26afd02f3a86 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> @@ -52,9 +52,11 @@ struct pci_epf_test {
>  	enum pci_barno		test_reg_bar;
>  	size_t			msix_table_offset;
>  	struct delayed_work	cmd_handler;
> -	struct dma_chan		*dma_chan;
> +	struct dma_chan		*dma_chan_tx;
> +	struct dma_chan		*dma_chan_rx;
>  	struct completion	transfer_complete;
>  	bool			dma_supported;
> +	bool			dma_private;
>  	const struct pci_epc_features *epc_features;
>  };
>  
> @@ -105,12 +107,15 @@ static void pci_epf_test_dma_callback(void *param)
>   */
>  static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
>  				      dma_addr_t dma_dst, dma_addr_t dma_src,
> -				      size_t len)
> +				      size_t len, dma_addr_t dma_remote,
> +				      enum dma_transfer_direction dir)
>  {
> +	struct dma_chan *chan = (dir == DMA_DEV_TO_MEM) ? epf_test->dma_chan_tx : epf_test->dma_chan_rx;
> +	dma_addr_t dma_local = (dir == DMA_MEM_TO_DEV) ? dma_src : dma_dst;
>  	enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
> -	struct dma_chan *chan = epf_test->dma_chan;
>  	struct pci_epf *epf = epf_test->epf;
>  	struct dma_async_tx_descriptor *tx;
> +	struct dma_slave_config sconf = {};
>  	struct device *dev = &epf->dev;
>  	dma_cookie_t cookie;
>  	int ret;
> @@ -120,7 +125,22 @@ static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
>  		return -EINVAL;
>  	}
>  
> -	tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
> +	if (epf_test->dma_private) {
> +		sconf.direction = dir;
> +		if (dir == DMA_MEM_TO_DEV)
> +			sconf.dst_addr = dma_remote;
> +		else
> +			sconf.src_addr = dma_remote;
> +
> +		if (dmaengine_slave_config(chan, &sconf)) {
> +			dev_err(dev, "DMA slave config fail\n");
> +			return -EIO;
> +		}
> +		tx = dmaengine_prep_slave_single(chan, dma_local, len, dir, flags);
> +	} else {
> +		tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
> +	}
> +
>  	if (!tx) {
>  		dev_err(dev, "Failed to prepare DMA memcpy\n");
>  		return -EIO;
> @@ -148,6 +168,23 @@ static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
>  	return 0;
>  }
>  
> +struct epf_dma_filter {
> +	struct device *dev;
> +	u32 dma_mask;
> +};
> +
> +static bool epf_dma_filter_fn(struct dma_chan *chan, void *node)
> +{
> +	struct epf_dma_filter *filter = node;
> +	struct dma_slave_caps caps;
> +
> +	memset(&caps, 0, sizeof(caps));
> +	dma_get_slave_caps(chan, &caps);
> +
> +	return chan->device->dev == filter->dev
> +		&& (filter->dma_mask & caps.directions);
> +}
> +
>  /**
>   * pci_epf_test_init_dma_chan() - Function to initialize EPF test DMA channel
>   * @epf_test: the EPF test device that performs data transfer operation
> @@ -158,10 +195,44 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
>  {
>  	struct pci_epf *epf = epf_test->epf;
>  	struct device *dev = &epf->dev;
> +	struct epf_dma_filter filter;
>  	struct dma_chan *dma_chan;
>  	dma_cap_mask_t mask;
>  	int ret;
>  
> +	filter.dev = epf->epc->dev.parent;
> +	filter.dma_mask = BIT(DMA_DEV_TO_MEM);
> +
> +	dma_cap_zero(mask);
> +	dma_cap_set(DMA_SLAVE, mask);
> +	dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
> +	if (IS_ERR_OR_NULL(dma_chan)) {
> +		dev_info(dev, "Failed to get private DMA channel. Falling back to generic one\n");
> +		goto fail_back_tx;
> +	}
> +
> +	epf_test->dma_chan_rx = dma_chan;
> +
> +	filter.dma_mask = BIT(DMA_MEM_TO_DEV);
> +	dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
> +
> +	if (IS_ERR(dma_chan)) {
> +		dev_info(dev, "Failed to get private DMA channel. Falling back to generic one\n");
> +		goto fail_back_rx;
> +	}
> +
> +	epf_test->dma_chan_tx = dma_chan;
> +	epf_test->dma_private = true;
> +
> +	init_completion(&epf_test->transfer_complete);
> +
> +	return 0;
> +
> +fail_back_rx:
> +	dma_release_channel(epf_test->dma_chan_rx);
> +	epf_test->dma_chan_tx = NULL;
> +
> +fail_back_tx:
>  	dma_cap_zero(mask);
>  	dma_cap_set(DMA_MEMCPY, mask);
>  
> @@ -174,7 +245,7 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
>  	}
>  	init_completion(&epf_test->transfer_complete);
>  
> -	epf_test->dma_chan = dma_chan;
> +	epf_test->dma_chan_tx = epf_test->dma_chan_rx = dma_chan;
>  
>  	return 0;
>  }
> @@ -190,8 +261,17 @@ static void pci_epf_test_clean_dma_chan(struct pci_epf_test *epf_test)
>  	if (!epf_test->dma_supported)
>  		return;
>  
> -	dma_release_channel(epf_test->dma_chan);
> -	epf_test->dma_chan = NULL;
> +	dma_release_channel(epf_test->dma_chan_tx);
> +	if (epf_test->dma_chan_tx == epf_test->dma_chan_rx) {
> +		epf_test->dma_chan_tx = NULL;
> +		epf_test->dma_chan_rx = NULL;
> +		return;
> +	}
> +
> +	dma_release_channel(epf_test->dma_chan_rx);
> +	epf_test->dma_chan_rx = NULL;
> +
> +	return;
>  }
>  
>  static void pci_epf_test_print_rate(const char *ops, u64 size,
> @@ -280,8 +360,14 @@ static int pci_epf_test_copy(struct pci_epf_test *epf_test)
>  			goto err_map_addr;
>  		}
>  
> +		if (epf_test->dma_private) {
> +			dev_err(dev, "Cannot transfer data using DMA\n");
> +			ret = -EINVAL;
> +			goto err_map_addr;
> +		}
> +
>  		ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
> -						 src_phys_addr, reg->size);
> +						 src_phys_addr, reg->size, 0, DMA_MEM_TO_MEM);
>  		if (ret)
>  			dev_err(dev, "Data transfer failed\n");
>  	} else {
> @@ -363,7 +449,8 @@ static int pci_epf_test_read(struct pci_epf_test *epf_test)
>  
>  		ktime_get_ts64(&start);
>  		ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
> -						 phys_addr, reg->size);
> +						 phys_addr, reg->size,
> +						 reg->src_addr, DMA_DEV_TO_MEM);
>  		if (ret)
>  			dev_err(dev, "Data transfer failed\n");
>  		ktime_get_ts64(&end);
> @@ -453,8 +540,9 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
>  		}
>  
>  		ktime_get_ts64(&start);
> +
>  		ret = pci_epf_test_data_transfer(epf_test, phys_addr,
> -						 src_phys_addr, reg->size);
> +						 src_phys_addr, reg->size, reg->dst_addr, DMA_MEM_TO_DEV);
>  		if (ret)
>  			dev_err(dev, "Data transfer failed\n");
>  		ktime_get_ts64(&end);
> -- 
> 2.35.1
>
Zhi Li April 27, 2022, 5:01 p.m. UTC | #3
On Wed, Apr 27, 2022 at 4:30 AM Lorenzo Pieralisi
<lorenzo.pieralisi@arm.com> wrote:
>
> On Fri, Apr 22, 2022 at 09:36:43AM -0500, Frank Li wrote:
> > Designware provided eDMA support in controller. This enabled use
> > this eDMA controller to transfer data.
> >
> > The whole flow align with standard DMA usage module
> >
> > 1. Using dma_request_channel() and filter function to find correct
> > RX and TX Channel.
> > 2. dmaengine_slave_config() config remote side physcial address.
> > 3. using dmaengine_prep_slave_single() create transfer descriptor
> > 4. tx_submit();
> > 5. dma_async_issue_pending();
> >
> > Tested at i.MX8DXL platform.
> >
> > root@imx8qmmek:~# /usr/bin/pcitest -d -w
> > WRITE ( 102400 bytes):          OKAY
> > root@imx8qmmek:~# /usr/bin/pcitest -d -r
> > READ ( 102400 bytes):           OKAY
> >
> > WRITE => Size: 102400 bytes DMA: YES  Time: 0.000180145 seconds Rate: 555108 KB/s
> > READ => Size: 102400 bytes  DMA: YES  Time: 0.000194397 seconds Rate: 514411 KB/s
> >
> > READ => Size: 102400 bytes  DMA: NO   Time: 0.013532597 seconds Rate: 7389 KB/s
> > WRITE => Size: 102400 bytes DMA: NO   Time: 0.000857090 seconds Rate: 116673 KB/s
> >
>
> You should rewrite this commit log.
>
> 1) this is not Designware specific
> 2) On what platforms you tested is information for a cover letter but
>    not very useful for a commit log
> 3) The commit log describes why you need the patch and what the patch
>    does.
>    It can be a one liner: "Enable DMA controller tests for endpoints with
>    DMA capabilities". Or something along those lines.

How about write as below

PCI: endpoint: Enable DMA controller tests for endpoints with DMA capabilities

Some Endpoints controllers have DMA capabilities.  This DMA controller has more
efficiency then a general external DMA controller.  And this DMA
controller can bypass
outbound memory address translation unit.

The whole flow use standard DMA usage module

1. Using dma_request_channel() and filter function to find correct
 RX and TX Channel. if not exist,  failure back to try allocate
general DMA controller
channel.
 2. dmaengine_slave_config() config remote side physcial address.
 3. using dmaengine_prep_slave_single() create transfer descriptor
 4. tx_submit();
 5. dma_async_issue_pending();
 .
best regards
Frank Li
>
> Lorenzo
>
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> > Change from v6 to v9:
> >  - none
> > Change from v5 to v6:
> >  - change subject
> > Change from v4 to v5:
> >  - none
> > Change from v3 to v4:
> >  - reverse Xmas tree order
> >  - local -> dma_local
> >  - change error message
> >  - IS_ERR -> IS_ERR_OR_NULL
> >  - check return value of dmaengine_slave_config()
> > Change from v1 to v2:
> >  - none
> >
> >  drivers/pci/endpoint/functions/pci-epf-test.c | 108 ++++++++++++++++--
> >  1 file changed, 98 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> > index 90d84d3bc868f..f26afd02f3a86 100644
> > --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> > +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> > @@ -52,9 +52,11 @@ struct pci_epf_test {
> >       enum pci_barno          test_reg_bar;
> >       size_t                  msix_table_offset;
> >       struct delayed_work     cmd_handler;
> > -     struct dma_chan         *dma_chan;
> > +     struct dma_chan         *dma_chan_tx;
> > +     struct dma_chan         *dma_chan_rx;
> >       struct completion       transfer_complete;
> >       bool                    dma_supported;
> > +     bool                    dma_private;
> >       const struct pci_epc_features *epc_features;
> >  };
> >
> > @@ -105,12 +107,15 @@ static void pci_epf_test_dma_callback(void *param)
> >   */
> >  static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
> >                                     dma_addr_t dma_dst, dma_addr_t dma_src,
> > -                                   size_t len)
> > +                                   size_t len, dma_addr_t dma_remote,
> > +                                   enum dma_transfer_direction dir)
> >  {
> > +     struct dma_chan *chan = (dir == DMA_DEV_TO_MEM) ? epf_test->dma_chan_tx : epf_test->dma_chan_rx;
> > +     dma_addr_t dma_local = (dir == DMA_MEM_TO_DEV) ? dma_src : dma_dst;
> >       enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
> > -     struct dma_chan *chan = epf_test->dma_chan;
> >       struct pci_epf *epf = epf_test->epf;
> >       struct dma_async_tx_descriptor *tx;
> > +     struct dma_slave_config sconf = {};
> >       struct device *dev = &epf->dev;
> >       dma_cookie_t cookie;
> >       int ret;
> > @@ -120,7 +125,22 @@ static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
> >               return -EINVAL;
> >       }
> >
> > -     tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
> > +     if (epf_test->dma_private) {
> > +             sconf.direction = dir;
> > +             if (dir == DMA_MEM_TO_DEV)
> > +                     sconf.dst_addr = dma_remote;
> > +             else
> > +                     sconf.src_addr = dma_remote;
> > +
> > +             if (dmaengine_slave_config(chan, &sconf)) {
> > +                     dev_err(dev, "DMA slave config fail\n");
> > +                     return -EIO;
> > +             }
> > +             tx = dmaengine_prep_slave_single(chan, dma_local, len, dir, flags);
> > +     } else {
> > +             tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
> > +     }
> > +
> >       if (!tx) {
> >               dev_err(dev, "Failed to prepare DMA memcpy\n");
> >               return -EIO;
> > @@ -148,6 +168,23 @@ static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
> >       return 0;
> >  }
> >
> > +struct epf_dma_filter {
> > +     struct device *dev;
> > +     u32 dma_mask;
> > +};
> > +
> > +static bool epf_dma_filter_fn(struct dma_chan *chan, void *node)
> > +{
> > +     struct epf_dma_filter *filter = node;
> > +     struct dma_slave_caps caps;
> > +
> > +     memset(&caps, 0, sizeof(caps));
> > +     dma_get_slave_caps(chan, &caps);
> > +
> > +     return chan->device->dev == filter->dev
> > +             && (filter->dma_mask & caps.directions);
> > +}
> > +
> >  /**
> >   * pci_epf_test_init_dma_chan() - Function to initialize EPF test DMA channel
> >   * @epf_test: the EPF test device that performs data transfer operation
> > @@ -158,10 +195,44 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
> >  {
> >       struct pci_epf *epf = epf_test->epf;
> >       struct device *dev = &epf->dev;
> > +     struct epf_dma_filter filter;
> >       struct dma_chan *dma_chan;
> >       dma_cap_mask_t mask;
> >       int ret;
> >
> > +     filter.dev = epf->epc->dev.parent;
> > +     filter.dma_mask = BIT(DMA_DEV_TO_MEM);
> > +
> > +     dma_cap_zero(mask);
> > +     dma_cap_set(DMA_SLAVE, mask);
> > +     dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
> > +     if (IS_ERR_OR_NULL(dma_chan)) {
> > +             dev_info(dev, "Failed to get private DMA channel. Falling back to generic one\n");
> > +             goto fail_back_tx;
> > +     }
> > +
> > +     epf_test->dma_chan_rx = dma_chan;
> > +
> > +     filter.dma_mask = BIT(DMA_MEM_TO_DEV);
> > +     dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
> > +
> > +     if (IS_ERR(dma_chan)) {
> > +             dev_info(dev, "Failed to get private DMA channel. Falling back to generic one\n");
> > +             goto fail_back_rx;
> > +     }
> > +
> > +     epf_test->dma_chan_tx = dma_chan;
> > +     epf_test->dma_private = true;
> > +
> > +     init_completion(&epf_test->transfer_complete);
> > +
> > +     return 0;
> > +
> > +fail_back_rx:
> > +     dma_release_channel(epf_test->dma_chan_rx);
> > +     epf_test->dma_chan_tx = NULL;
> > +
> > +fail_back_tx:
> >       dma_cap_zero(mask);
> >       dma_cap_set(DMA_MEMCPY, mask);
> >
> > @@ -174,7 +245,7 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
> >       }
> >       init_completion(&epf_test->transfer_complete);
> >
> > -     epf_test->dma_chan = dma_chan;
> > +     epf_test->dma_chan_tx = epf_test->dma_chan_rx = dma_chan;
> >
> >       return 0;
> >  }
> > @@ -190,8 +261,17 @@ static void pci_epf_test_clean_dma_chan(struct pci_epf_test *epf_test)
> >       if (!epf_test->dma_supported)
> >               return;
> >
> > -     dma_release_channel(epf_test->dma_chan);
> > -     epf_test->dma_chan = NULL;
> > +     dma_release_channel(epf_test->dma_chan_tx);
> > +     if (epf_test->dma_chan_tx == epf_test->dma_chan_rx) {
> > +             epf_test->dma_chan_tx = NULL;
> > +             epf_test->dma_chan_rx = NULL;
> > +             return;
> > +     }
> > +
> > +     dma_release_channel(epf_test->dma_chan_rx);
> > +     epf_test->dma_chan_rx = NULL;
> > +
> > +     return;
> >  }
> >
> >  static void pci_epf_test_print_rate(const char *ops, u64 size,
> > @@ -280,8 +360,14 @@ static int pci_epf_test_copy(struct pci_epf_test *epf_test)
> >                       goto err_map_addr;
> >               }
> >
> > +             if (epf_test->dma_private) {
> > +                     dev_err(dev, "Cannot transfer data using DMA\n");
> > +                     ret = -EINVAL;
> > +                     goto err_map_addr;
> > +             }
> > +
> >               ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
> > -                                              src_phys_addr, reg->size);
> > +                                              src_phys_addr, reg->size, 0, DMA_MEM_TO_MEM);
> >               if (ret)
> >                       dev_err(dev, "Data transfer failed\n");
> >       } else {
> > @@ -363,7 +449,8 @@ static int pci_epf_test_read(struct pci_epf_test *epf_test)
> >
> >               ktime_get_ts64(&start);
> >               ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
> > -                                              phys_addr, reg->size);
> > +                                              phys_addr, reg->size,
> > +                                              reg->src_addr, DMA_DEV_TO_MEM);
> >               if (ret)
> >                       dev_err(dev, "Data transfer failed\n");
> >               ktime_get_ts64(&end);
> > @@ -453,8 +540,9 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
> >               }
> >
> >               ktime_get_ts64(&start);
> > +
> >               ret = pci_epf_test_data_transfer(epf_test, phys_addr,
> > -                                              src_phys_addr, reg->size);
> > +                                              src_phys_addr, reg->size, reg->dst_addr, DMA_MEM_TO_DEV);
> >               if (ret)
> >                       dev_err(dev, "Data transfer failed\n");
> >               ktime_get_ts64(&end);
> > --
> > 2.35.1
> >
Zhi Li April 29, 2022, 3:38 p.m. UTC | #4
On Wed, Apr 27, 2022 at 12:01 PM Zhi Li <lznuaa@gmail.com> wrote:
>
> On Wed, Apr 27, 2022 at 4:30 AM Lorenzo Pieralisi
> <lorenzo.pieralisi@arm.com> wrote:
> >
> > On Fri, Apr 22, 2022 at 09:36:43AM -0500, Frank Li wrote:
> > > Designware provided eDMA support in controller. This enabled use
> > > this eDMA controller to transfer data.
> > >
> > > The whole flow align with standard DMA usage module
> > >
> > > 1. Using dma_request_channel() and filter function to find correct
> > > RX and TX Channel.
> > > 2. dmaengine_slave_config() config remote side physcial address.
> > > 3. using dmaengine_prep_slave_single() create transfer descriptor
> > > 4. tx_submit();
> > > 5. dma_async_issue_pending();
> > >
> > > Tested at i.MX8DXL platform.
> > >
> > > root@imx8qmmek:~# /usr/bin/pcitest -d -w
> > > WRITE ( 102400 bytes):          OKAY
> > > root@imx8qmmek:~# /usr/bin/pcitest -d -r
> > > READ ( 102400 bytes):           OKAY
> > >
> > > WRITE => Size: 102400 bytes DMA: YES  Time: 0.000180145 seconds Rate: 555108 KB/s
> > > READ => Size: 102400 bytes  DMA: YES  Time: 0.000194397 seconds Rate: 514411 KB/s
> > >
> > > READ => Size: 102400 bytes  DMA: NO   Time: 0.013532597 seconds Rate: 7389 KB/s
> > > WRITE => Size: 102400 bytes DMA: NO   Time: 0.000857090 seconds Rate: 116673 KB/s
> > >
> >
> > You should rewrite this commit log.
> >
> > 1) this is not Designware specific
> > 2) On what platforms you tested is information for a cover letter but
> >    not very useful for a commit log
> > 3) The commit log describes why you need the patch and what the patch
> >    does.
> >    It can be a one liner: "Enable DMA controller tests for endpoints with
> >    DMA capabilities". Or something along those lines.
>
> How about write as below
>
> PCI: endpoint: Enable DMA controller tests for endpoints with DMA capabilities
>
> Some Endpoints controllers have DMA capabilities.  This DMA controller has more
> efficiency then a general external DMA controller.  And this DMA
> controller can bypass
> outbound memory address translation unit.
>
> The whole flow use standard DMA usage module
>
> 1. Using dma_request_channel() and filter function to find correct
>  RX and TX Channel. if not exist,  failure back to try allocate
> general DMA controller
> channel.
>  2. dmaengine_slave_config() config remote side physcial address.
>  3. using dmaengine_prep_slave_single() create transfer descriptor
>  4. tx_submit();
>  5. dma_async_issue_pending();
>  .
> best regards
> Frank Li

@Lorenzo  do you satisfy the above commit message?

> >
> > Lorenzo
> >
> > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > ---
> > > Change from v6 to v9:
> > >  - none
> > > Change from v5 to v6:
> > >  - change subject
> > > Change from v4 to v5:
> > >  - none
> > > Change from v3 to v4:
> > >  - reverse Xmas tree order
> > >  - local -> dma_local
> > >  - change error message
> > >  - IS_ERR -> IS_ERR_OR_NULL
> > >  - check return value of dmaengine_slave_config()
> > > Change from v1 to v2:
> > >  - none
> > >
> > >  drivers/pci/endpoint/functions/pci-epf-test.c | 108 ++++++++++++++++--
> > >  1 file changed, 98 insertions(+), 10 deletions(-)
> > >
> > > diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> > > index 90d84d3bc868f..f26afd02f3a86 100644
> > > --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> > > +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> > > @@ -52,9 +52,11 @@ struct pci_epf_test {
> > >       enum pci_barno          test_reg_bar;
> > >       size_t                  msix_table_offset;
> > >       struct delayed_work     cmd_handler;
> > > -     struct dma_chan         *dma_chan;
> > > +     struct dma_chan         *dma_chan_tx;
> > > +     struct dma_chan         *dma_chan_rx;
> > >       struct completion       transfer_complete;
> > >       bool                    dma_supported;
> > > +     bool                    dma_private;
> > >       const struct pci_epc_features *epc_features;
> > >  };
> > >
> > > @@ -105,12 +107,15 @@ static void pci_epf_test_dma_callback(void *param)
> > >   */
> > >  static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
> > >                                     dma_addr_t dma_dst, dma_addr_t dma_src,
> > > -                                   size_t len)
> > > +                                   size_t len, dma_addr_t dma_remote,
> > > +                                   enum dma_transfer_direction dir)
> > >  {
> > > +     struct dma_chan *chan = (dir == DMA_DEV_TO_MEM) ? epf_test->dma_chan_tx : epf_test->dma_chan_rx;
> > > +     dma_addr_t dma_local = (dir == DMA_MEM_TO_DEV) ? dma_src : dma_dst;
> > >       enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
> > > -     struct dma_chan *chan = epf_test->dma_chan;
> > >       struct pci_epf *epf = epf_test->epf;
> > >       struct dma_async_tx_descriptor *tx;
> > > +     struct dma_slave_config sconf = {};
> > >       struct device *dev = &epf->dev;
> > >       dma_cookie_t cookie;
> > >       int ret;
> > > @@ -120,7 +125,22 @@ static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
> > >               return -EINVAL;
> > >       }
> > >
> > > -     tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
> > > +     if (epf_test->dma_private) {
> > > +             sconf.direction = dir;
> > > +             if (dir == DMA_MEM_TO_DEV)
> > > +                     sconf.dst_addr = dma_remote;
> > > +             else
> > > +                     sconf.src_addr = dma_remote;
> > > +
> > > +             if (dmaengine_slave_config(chan, &sconf)) {
> > > +                     dev_err(dev, "DMA slave config fail\n");
> > > +                     return -EIO;
> > > +             }
> > > +             tx = dmaengine_prep_slave_single(chan, dma_local, len, dir, flags);
> > > +     } else {
> > > +             tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
> > > +     }
> > > +
> > >       if (!tx) {
> > >               dev_err(dev, "Failed to prepare DMA memcpy\n");
> > >               return -EIO;
> > > @@ -148,6 +168,23 @@ static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
> > >       return 0;
> > >  }
> > >
> > > +struct epf_dma_filter {
> > > +     struct device *dev;
> > > +     u32 dma_mask;
> > > +};
> > > +
> > > +static bool epf_dma_filter_fn(struct dma_chan *chan, void *node)
> > > +{
> > > +     struct epf_dma_filter *filter = node;
> > > +     struct dma_slave_caps caps;
> > > +
> > > +     memset(&caps, 0, sizeof(caps));
> > > +     dma_get_slave_caps(chan, &caps);
> > > +
> > > +     return chan->device->dev == filter->dev
> > > +             && (filter->dma_mask & caps.directions);
> > > +}
> > > +
> > >  /**
> > >   * pci_epf_test_init_dma_chan() - Function to initialize EPF test DMA channel
> > >   * @epf_test: the EPF test device that performs data transfer operation
> > > @@ -158,10 +195,44 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
> > >  {
> > >       struct pci_epf *epf = epf_test->epf;
> > >       struct device *dev = &epf->dev;
> > > +     struct epf_dma_filter filter;
> > >       struct dma_chan *dma_chan;
> > >       dma_cap_mask_t mask;
> > >       int ret;
> > >
> > > +     filter.dev = epf->epc->dev.parent;
> > > +     filter.dma_mask = BIT(DMA_DEV_TO_MEM);
> > > +
> > > +     dma_cap_zero(mask);
> > > +     dma_cap_set(DMA_SLAVE, mask);
> > > +     dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
> > > +     if (IS_ERR_OR_NULL(dma_chan)) {
> > > +             dev_info(dev, "Failed to get private DMA channel. Falling back to generic one\n");
> > > +             goto fail_back_tx;
> > > +     }
> > > +
> > > +     epf_test->dma_chan_rx = dma_chan;
> > > +
> > > +     filter.dma_mask = BIT(DMA_MEM_TO_DEV);
> > > +     dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
> > > +
> > > +     if (IS_ERR(dma_chan)) {
> > > +             dev_info(dev, "Failed to get private DMA channel. Falling back to generic one\n");
> > > +             goto fail_back_rx;
> > > +     }
> > > +
> > > +     epf_test->dma_chan_tx = dma_chan;
> > > +     epf_test->dma_private = true;
> > > +
> > > +     init_completion(&epf_test->transfer_complete);
> > > +
> > > +     return 0;
> > > +
> > > +fail_back_rx:
> > > +     dma_release_channel(epf_test->dma_chan_rx);
> > > +     epf_test->dma_chan_tx = NULL;
> > > +
> > > +fail_back_tx:
> > >       dma_cap_zero(mask);
> > >       dma_cap_set(DMA_MEMCPY, mask);
> > >
> > > @@ -174,7 +245,7 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
> > >       }
> > >       init_completion(&epf_test->transfer_complete);
> > >
> > > -     epf_test->dma_chan = dma_chan;
> > > +     epf_test->dma_chan_tx = epf_test->dma_chan_rx = dma_chan;
> > >
> > >       return 0;
> > >  }
> > > @@ -190,8 +261,17 @@ static void pci_epf_test_clean_dma_chan(struct pci_epf_test *epf_test)
> > >       if (!epf_test->dma_supported)
> > >               return;
> > >
> > > -     dma_release_channel(epf_test->dma_chan);
> > > -     epf_test->dma_chan = NULL;
> > > +     dma_release_channel(epf_test->dma_chan_tx);
> > > +     if (epf_test->dma_chan_tx == epf_test->dma_chan_rx) {
> > > +             epf_test->dma_chan_tx = NULL;
> > > +             epf_test->dma_chan_rx = NULL;
> > > +             return;
> > > +     }
> > > +
> > > +     dma_release_channel(epf_test->dma_chan_rx);
> > > +     epf_test->dma_chan_rx = NULL;
> > > +
> > > +     return;
> > >  }
> > >
> > >  static void pci_epf_test_print_rate(const char *ops, u64 size,
> > > @@ -280,8 +360,14 @@ static int pci_epf_test_copy(struct pci_epf_test *epf_test)
> > >                       goto err_map_addr;
> > >               }
> > >
> > > +             if (epf_test->dma_private) {
> > > +                     dev_err(dev, "Cannot transfer data using DMA\n");
> > > +                     ret = -EINVAL;
> > > +                     goto err_map_addr;
> > > +             }
> > > +
> > >               ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
> > > -                                              src_phys_addr, reg->size);
> > > +                                              src_phys_addr, reg->size, 0, DMA_MEM_TO_MEM);
> > >               if (ret)
> > >                       dev_err(dev, "Data transfer failed\n");
> > >       } else {
> > > @@ -363,7 +449,8 @@ static int pci_epf_test_read(struct pci_epf_test *epf_test)
> > >
> > >               ktime_get_ts64(&start);
> > >               ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
> > > -                                              phys_addr, reg->size);
> > > +                                              phys_addr, reg->size,
> > > +                                              reg->src_addr, DMA_DEV_TO_MEM);
> > >               if (ret)
> > >                       dev_err(dev, "Data transfer failed\n");
> > >               ktime_get_ts64(&end);
> > > @@ -453,8 +540,9 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
> > >               }
> > >
> > >               ktime_get_ts64(&start);
> > > +
> > >               ret = pci_epf_test_data_transfer(epf_test, phys_addr,
> > > -                                              src_phys_addr, reg->size);
> > > +                                              src_phys_addr, reg->size, reg->dst_addr, DMA_MEM_TO_DEV);
> > >               if (ret)
> > >                       dev_err(dev, "Data transfer failed\n");
> > >               ktime_get_ts64(&end);
> > > --
> > > 2.35.1
> > >
diff mbox series

Patch

diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index 90d84d3bc868f..f26afd02f3a86 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -52,9 +52,11 @@  struct pci_epf_test {
 	enum pci_barno		test_reg_bar;
 	size_t			msix_table_offset;
 	struct delayed_work	cmd_handler;
-	struct dma_chan		*dma_chan;
+	struct dma_chan		*dma_chan_tx;
+	struct dma_chan		*dma_chan_rx;
 	struct completion	transfer_complete;
 	bool			dma_supported;
+	bool			dma_private;
 	const struct pci_epc_features *epc_features;
 };
 
@@ -105,12 +107,15 @@  static void pci_epf_test_dma_callback(void *param)
  */
 static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
 				      dma_addr_t dma_dst, dma_addr_t dma_src,
-				      size_t len)
+				      size_t len, dma_addr_t dma_remote,
+				      enum dma_transfer_direction dir)
 {
+	struct dma_chan *chan = (dir == DMA_DEV_TO_MEM) ? epf_test->dma_chan_tx : epf_test->dma_chan_rx;
+	dma_addr_t dma_local = (dir == DMA_MEM_TO_DEV) ? dma_src : dma_dst;
 	enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
-	struct dma_chan *chan = epf_test->dma_chan;
 	struct pci_epf *epf = epf_test->epf;
 	struct dma_async_tx_descriptor *tx;
+	struct dma_slave_config sconf = {};
 	struct device *dev = &epf->dev;
 	dma_cookie_t cookie;
 	int ret;
@@ -120,7 +125,22 @@  static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
 		return -EINVAL;
 	}
 
-	tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
+	if (epf_test->dma_private) {
+		sconf.direction = dir;
+		if (dir == DMA_MEM_TO_DEV)
+			sconf.dst_addr = dma_remote;
+		else
+			sconf.src_addr = dma_remote;
+
+		if (dmaengine_slave_config(chan, &sconf)) {
+			dev_err(dev, "DMA slave config fail\n");
+			return -EIO;
+		}
+		tx = dmaengine_prep_slave_single(chan, dma_local, len, dir, flags);
+	} else {
+		tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
+	}
+
 	if (!tx) {
 		dev_err(dev, "Failed to prepare DMA memcpy\n");
 		return -EIO;
@@ -148,6 +168,23 @@  static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
 	return 0;
 }
 
+struct epf_dma_filter {
+	struct device *dev;
+	u32 dma_mask;
+};
+
+static bool epf_dma_filter_fn(struct dma_chan *chan, void *node)
+{
+	struct epf_dma_filter *filter = node;
+	struct dma_slave_caps caps;
+
+	memset(&caps, 0, sizeof(caps));
+	dma_get_slave_caps(chan, &caps);
+
+	return chan->device->dev == filter->dev
+		&& (filter->dma_mask & caps.directions);
+}
+
 /**
  * pci_epf_test_init_dma_chan() - Function to initialize EPF test DMA channel
  * @epf_test: the EPF test device that performs data transfer operation
@@ -158,10 +195,44 @@  static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
 {
 	struct pci_epf *epf = epf_test->epf;
 	struct device *dev = &epf->dev;
+	struct epf_dma_filter filter;
 	struct dma_chan *dma_chan;
 	dma_cap_mask_t mask;
 	int ret;
 
+	filter.dev = epf->epc->dev.parent;
+	filter.dma_mask = BIT(DMA_DEV_TO_MEM);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
+	if (IS_ERR_OR_NULL(dma_chan)) {
+		dev_info(dev, "Failed to get private DMA channel. Falling back to generic one\n");
+		goto fail_back_tx;
+	}
+
+	epf_test->dma_chan_rx = dma_chan;
+
+	filter.dma_mask = BIT(DMA_MEM_TO_DEV);
+	dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
+
+	if (IS_ERR(dma_chan)) {
+		dev_info(dev, "Failed to get private DMA channel. Falling back to generic one\n");
+		goto fail_back_rx;
+	}
+
+	epf_test->dma_chan_tx = dma_chan;
+	epf_test->dma_private = true;
+
+	init_completion(&epf_test->transfer_complete);
+
+	return 0;
+
+fail_back_rx:
+	dma_release_channel(epf_test->dma_chan_rx);
+	epf_test->dma_chan_tx = NULL;
+
+fail_back_tx:
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_MEMCPY, mask);
 
@@ -174,7 +245,7 @@  static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
 	}
 	init_completion(&epf_test->transfer_complete);
 
-	epf_test->dma_chan = dma_chan;
+	epf_test->dma_chan_tx = epf_test->dma_chan_rx = dma_chan;
 
 	return 0;
 }
@@ -190,8 +261,17 @@  static void pci_epf_test_clean_dma_chan(struct pci_epf_test *epf_test)
 	if (!epf_test->dma_supported)
 		return;
 
-	dma_release_channel(epf_test->dma_chan);
-	epf_test->dma_chan = NULL;
+	dma_release_channel(epf_test->dma_chan_tx);
+	if (epf_test->dma_chan_tx == epf_test->dma_chan_rx) {
+		epf_test->dma_chan_tx = NULL;
+		epf_test->dma_chan_rx = NULL;
+		return;
+	}
+
+	dma_release_channel(epf_test->dma_chan_rx);
+	epf_test->dma_chan_rx = NULL;
+
+	return;
 }
 
 static void pci_epf_test_print_rate(const char *ops, u64 size,
@@ -280,8 +360,14 @@  static int pci_epf_test_copy(struct pci_epf_test *epf_test)
 			goto err_map_addr;
 		}
 
+		if (epf_test->dma_private) {
+			dev_err(dev, "Cannot transfer data using DMA\n");
+			ret = -EINVAL;
+			goto err_map_addr;
+		}
+
 		ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
-						 src_phys_addr, reg->size);
+						 src_phys_addr, reg->size, 0, DMA_MEM_TO_MEM);
 		if (ret)
 			dev_err(dev, "Data transfer failed\n");
 	} else {
@@ -363,7 +449,8 @@  static int pci_epf_test_read(struct pci_epf_test *epf_test)
 
 		ktime_get_ts64(&start);
 		ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
-						 phys_addr, reg->size);
+						 phys_addr, reg->size,
+						 reg->src_addr, DMA_DEV_TO_MEM);
 		if (ret)
 			dev_err(dev, "Data transfer failed\n");
 		ktime_get_ts64(&end);
@@ -453,8 +540,9 @@  static int pci_epf_test_write(struct pci_epf_test *epf_test)
 		}
 
 		ktime_get_ts64(&start);
+
 		ret = pci_epf_test_data_transfer(epf_test, phys_addr,
-						 src_phys_addr, reg->size);
+						 src_phys_addr, reg->size, reg->dst_addr, DMA_MEM_TO_DEV);
 		if (ret)
 			dev_err(dev, "Data transfer failed\n");
 		ktime_get_ts64(&end);