diff mbox series

[1/2] dmaengine: mediatek-cqdma: Add SoC-specific match data

Message ID 20220503105328.54755-2-angelogioacchino.delregno@collabora.com (mailing list archive)
State Superseded
Headers show
Series MediaTek Helio X10 MT6795 - CQDMA driver | expand

Commit Message

AngeloGioacchino Del Regno May 3, 2022, 10:53 a.m. UTC
On some SoCs the DST2 and SRC2 registers may be at a different offset:
add a match data structure and assign it to mt6765 as a preparation
for adding support for more SoCs.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/dma/mediatek/mtk-cqdma.c | 34 +++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)

Comments

kernel test robot May 3, 2022, 1:32 p.m. UTC | #1
Hi AngeloGioacchino,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on vkoul-dmaengine/next]
[also build test WARNING on v5.18-rc5 next-20220503]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/AngeloGioacchino-Del-Regno/MediaTek-Helio-X10-MT6795-CQDMA-driver/20220503-185610
base:   https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git next
config: mips-allyesconfig (https://download.01.org/0day-ci/archive/20220503/202205032104.sDnKlXcO-lkp@intel.com/config)
compiler: mips-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/1516c04b4553b4a3037e86dada37c202af23e4b3
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review AngeloGioacchino-Del-Regno/MediaTek-Helio-X10-MT6795-CQDMA-driver/20220503-185610
        git checkout 1516c04b4553b4a3037e86dada37c202af23e4b3
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=mips SHELL=/bin/bash drivers/dma/mediatek/

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/dma/mediatek/mtk-cqdma.c: In function 'mtk_cqdma_start':
   drivers/dma/mediatek/mtk-cqdma.c:243:42: error: implicit declaration of function 'to_cqma_dev'; did you mean 'to_cqdma_dev'? [-Werror=implicit-function-declaration]
     243 |         struct mtk_cqdma_device *cqdma = to_cqma_dev(cvd->ch);
         |                                          ^~~~~~~~~~~
         |                                          to_cqdma_dev
>> drivers/dma/mediatek/mtk-cqdma.c:243:42: warning: initialization of 'struct mtk_cqdma_device *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
   drivers/dma/mediatek/mtk-cqdma.c:259:30: error: 'struct mtk_cqdma_device' has no member named 'plat'
     259 |         mtk_dma_set(pc, cqdma->plat->reg_src2, 0);
         |                              ^~
   drivers/dma/mediatek/mtk-cqdma.c:267:30: error: 'struct mtk_cqdma_device' has no member named 'plat'
     267 |         mtk_dma_set(pc, cqdma->plat->reg_dst2, 0);
         |                              ^~
   drivers/dma/mediatek/mtk-cqdma.c: At top level:
   drivers/dma/mediatek/mtk-cqdma.c:754:54: error: expected '=', ',', ';', 'asm' or '__attribute__' before '{' token
     754 | static const struct mtk_cqdma_plat_data cqdma_mt6765 {
         |                                                      ^
   drivers/dma/mediatek/mtk-cqdma.c:760:59: error: 'cqdma_mt6765' undeclared here (not in a function)
     760 |         { .compatible = "mediatek,mt6765-cqdma", .data = &cqdma_mt6765 },
         |                                                           ^~~~~~~~~~~~
   drivers/dma/mediatek/mtk-cqdma.c: In function 'mtk_cqdma_probe':
   drivers/dma/mediatek/mtk-cqdma.c:777:14: error: 'struct mtk_cqdma_device' has no member named 'plat'
     777 |         cqdma->plat = device_get_match_data(&pdev->dev);
         |              ^~
   drivers/dma/mediatek/mtk-cqdma.c:778:18: error: 'struct mtk_cqdma_device' has no member named 'plat'
     778 |         if (cqdma->plat)
         |                  ^~
   cc1: some warnings being treated as errors


vim +243 drivers/dma/mediatek/mtk-cqdma.c

   239	
   240	static void mtk_cqdma_start(struct mtk_cqdma_pchan *pc,
   241				    struct mtk_cqdma_vdesc *cvd)
   242	{
 > 243		struct mtk_cqdma_device *cqdma = to_cqma_dev(cvd->ch);
   244	
   245		/* wait for the previous transaction done */
   246		if (mtk_cqdma_poll_engine_done(pc, true) < 0)
   247			dev_err(cqdma2dev(to_cqdma_dev(cvd->ch)), "cqdma wait transaction timeout\n");
   248	
   249		/* warm reset the dma engine for the new transaction */
   250		mtk_dma_set(pc, MTK_CQDMA_RESET, MTK_CQDMA_WARM_RST_BIT);
   251		if (mtk_cqdma_poll_engine_done(pc, true) < 0)
   252			dev_err(cqdma2dev(to_cqdma_dev(cvd->ch)), "cqdma warm reset timeout\n");
   253	
   254		/* setup the source */
   255		mtk_dma_set(pc, MTK_CQDMA_SRC, cvd->src & MTK_CQDMA_ADDR_LIMIT);
   256	#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
   257		mtk_dma_set(pc, cqdma->plat->reg_src2, cvd->src >> MTK_CQDMA_ADDR2_SHFIT);
   258	#else
   259		mtk_dma_set(pc, cqdma->plat->reg_src2, 0);
   260	#endif
   261	
   262		/* setup the destination */
   263		mtk_dma_set(pc, MTK_CQDMA_DST, cvd->dest & MTK_CQDMA_ADDR_LIMIT);
   264	#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
   265		mtk_dma_set(pc, cqdma->plat->reg_dst2, cvd->dest >> MTK_CQDMA_ADDR2_SHFIT);
   266	#else
   267		mtk_dma_set(pc, cqdma->plat->reg_dst2, 0);
   268	#endif
   269	
   270		/* setup the length */
   271		mtk_dma_set(pc, MTK_CQDMA_LEN1, cvd->len);
   272	
   273		/* start dma engine */
   274		mtk_dma_set(pc, MTK_CQDMA_EN, MTK_CQDMA_EN_BIT);
   275	}
   276
diff mbox series

Patch

diff --git a/drivers/dma/mediatek/mtk-cqdma.c b/drivers/dma/mediatek/mtk-cqdma.c
index f8847c48ba03..7d8c54da3d58 100644
--- a/drivers/dma/mediatek/mtk-cqdma.c
+++ b/drivers/dma/mediatek/mtk-cqdma.c
@@ -48,8 +48,6 @@ 
 #define MTK_CQDMA_DST			0x20
 #define MTK_CQDMA_LEN1			0x24
 #define MTK_CQDMA_LEN2			0x28
-#define MTK_CQDMA_SRC2			0x60
-#define MTK_CQDMA_DST2			0x64
 
 /* Registers setting */
 #define MTK_CQDMA_EN_BIT		BIT(0)
@@ -126,9 +124,20 @@  struct mtk_cqdma_vchan {
 	bool issue_synchronize;
 };
 
+/**
+ * struct mtk_cqdma_plat_data - SoC specific parameters
+ * @reg_dst2:               dst2 register offset
+ * @reg_src2:               src2 register offset
+ */
+struct mtk_cqdma_plat_data {
+	u8 reg_src2;
+	u8 reg_dst2;
+};
+
 /**
  * struct mtk_cqdma_device - The struct holding info describing CQDMA
  *                          device
+ * @plat:                   SoC-specific platform data
  * @ddev:                   An instance for struct dma_device
  * @clk:                    The clock that device internal is using
  * @dma_requests:           The number of VCs the device supports to
@@ -231,6 +240,8 @@  static int mtk_cqdma_hard_reset(struct mtk_cqdma_pchan *pc)
 static void mtk_cqdma_start(struct mtk_cqdma_pchan *pc,
 			    struct mtk_cqdma_vdesc *cvd)
 {
+	struct mtk_cqdma_device *cqdma = to_cqma_dev(cvd->ch);
+
 	/* wait for the previous transaction done */
 	if (mtk_cqdma_poll_engine_done(pc, true) < 0)
 		dev_err(cqdma2dev(to_cqdma_dev(cvd->ch)), "cqdma wait transaction timeout\n");
@@ -243,17 +254,17 @@  static void mtk_cqdma_start(struct mtk_cqdma_pchan *pc,
 	/* setup the source */
 	mtk_dma_set(pc, MTK_CQDMA_SRC, cvd->src & MTK_CQDMA_ADDR_LIMIT);
 #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
-	mtk_dma_set(pc, MTK_CQDMA_SRC2, cvd->src >> MTK_CQDMA_ADDR2_SHFIT);
+	mtk_dma_set(pc, cqdma->plat->reg_src2, cvd->src >> MTK_CQDMA_ADDR2_SHFIT);
 #else
-	mtk_dma_set(pc, MTK_CQDMA_SRC2, 0);
+	mtk_dma_set(pc, cqdma->plat->reg_src2, 0);
 #endif
 
 	/* setup the destination */
 	mtk_dma_set(pc, MTK_CQDMA_DST, cvd->dest & MTK_CQDMA_ADDR_LIMIT);
 #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
-	mtk_dma_set(pc, MTK_CQDMA_DST2, cvd->dest >> MTK_CQDMA_ADDR2_SHFIT);
+	mtk_dma_set(pc, cqdma->plat->reg_dst2, cvd->dest >> MTK_CQDMA_ADDR2_SHFIT);
 #else
-	mtk_dma_set(pc, MTK_CQDMA_DST2, 0);
+	mtk_dma_set(pc, cqdma->plat->reg_dst2, 0);
 #endif
 
 	/* setup the length */
@@ -740,8 +751,13 @@  static void mtk_cqdma_hw_deinit(struct mtk_cqdma_device *cqdma)
 	pm_runtime_disable(cqdma2dev(cqdma));
 }
 
+static const struct mtk_cqdma_plat_data cqdma_mt6765 {
+	.reg_dst2 = 0x64,
+	.reg_src2 = 0x60,
+};
+
 static const struct of_device_id mtk_cqdma_match[] = {
-	{ .compatible = "mediatek,mt6765-cqdma" },
+	{ .compatible = "mediatek,mt6765-cqdma", .data = &cqdma_mt6765 },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mtk_cqdma_match);
@@ -758,6 +774,10 @@  static int mtk_cqdma_probe(struct platform_device *pdev)
 	if (!cqdma)
 		return -ENOMEM;
 
+	cqdma->plat = device_get_match_data(&pdev->dev);
+	if (cqdma->plat)
+		return -EINVAL;
+
 	dd = &cqdma->ddev;
 
 	cqdma->clk = devm_clk_get(&pdev->dev, "cqdma");