@@ -535,6 +535,13 @@ static void stm32_dma_dump_reg(struct stm32_dma_chan *chan)
dev_dbg(chan2dev(chan), "SFCR: 0x%08x\n", sfcr);
}
+static void stm32_dma_sg_inc(struct stm32_dma_chan *chan)
+{
+ chan->next_sg++;
+ if (chan->desc->cyclic && (chan->next_sg == chan->desc->num_sgs))
+ chan->next_sg = 0;
+}
+
static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan);
static void stm32_dma_start_transfer(struct stm32_dma_chan *chan)
@@ -575,7 +582,7 @@ static void stm32_dma_start_transfer(struct stm32_dma_chan *chan)
stm32_dma_write(dmadev, STM32_DMA_SM1AR(chan->id), reg->dma_sm1ar);
stm32_dma_write(dmadev, STM32_DMA_SNDTR(chan->id), reg->dma_sndtr);
- chan->next_sg++;
+ stm32_dma_sg_inc(chan);
/* Clear interrupt status if it is there */
status = stm32_dma_irq_status(chan);
@@ -606,9 +613,6 @@ static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan)
dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
if (dma_scr & STM32_DMA_SCR_DBM) {
- if (chan->next_sg == chan->desc->num_sgs)
- chan->next_sg = 0;
-
sg_req = &chan->desc->sg_req[chan->next_sg];
if (dma_scr & STM32_DMA_SCR_CT) {
@@ -630,7 +634,7 @@ static void stm32_dma_handle_chan_done(struct stm32_dma_chan *chan)
if (chan->desc) {
if (chan->desc->cyclic) {
vchan_cyclic_callback(&chan->desc->vdesc);
- chan->next_sg++;
+ stm32_dma_sg_inc(chan);
stm32_dma_configure_next_sg(chan);
} else {
chan->busy = false;
chan->next_sg is used to know which transfer will start after the ongoing one. It is incremented for each new transfer, either on transfer start for non-cyclic transfers, or on transfer complete interrupt for cyclic transfers. For cyclic transfer, when the last item is reached, chan->next_sg must be reinitialized to the first item. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> --- drivers/dma/stm32-dma.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)