@@ -32,8 +32,10 @@
#define STM32_DMA_LISR 0x0000 /* DMA Low Int Status Reg */
#define STM32_DMA_HISR 0x0004 /* DMA High Int Status Reg */
+#define STM32_DMA_ISR(n) (((n) & 4) ? STM32_DMA_HISR : STM32_DMA_LISR)
#define STM32_DMA_LIFCR 0x0008 /* DMA Low Int Flag Clear Reg */
#define STM32_DMA_HIFCR 0x000c /* DMA High Int Flag Clear Reg */
+#define STM32_DMA_IFCR(n) (((n) & 4) ? STM32_DMA_HIFCR : STM32_DMA_LIFCR)
#define STM32_DMA_TCI BIT(5) /* Transfer Complete Interrupt */
#define STM32_DMA_HTI BIT(4) /* Half Transfer Interrupt */
#define STM32_DMA_TEI BIT(3) /* Transfer Error Interrupt */
@@ -43,6 +45,12 @@
| STM32_DMA_TEI \
| STM32_DMA_DMEI \
| STM32_DMA_FEI)
+/*
+ * If (chan->id % 4) is 2 or 3, left shift the mask by 16 bits;
+ * if (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits.
+ */
+#define STM32_DMA_FLAGS_SHIFT(n) ({ typeof(n) (_n) = (n); \
+ (((_n) & 2) << 3) | (((_n) & 1) * 6); })
/* DMA Stream x Configuration Register */
#define STM32_DMA_SCR(x) (0x0010 + 0x18 * (x)) /* x = 0..7 */
@@ -401,17 +409,10 @@ static u32 stm32_dma_irq_status(struct stm32_dma_chan *chan)
/*
* Read "flags" from DMA_xISR register corresponding to the selected
* DMA channel at the correct bit offset inside that register.
- *
- * If (ch % 4) is 2 or 3, left shift the mask by 16 bits.
- * If (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits.
*/
- if (chan->id & 4)
- dma_isr = stm32_dma_read(dmadev, STM32_DMA_HISR);
- else
- dma_isr = stm32_dma_read(dmadev, STM32_DMA_LISR);
-
- flags = dma_isr >> (((chan->id & 2) << 3) | ((chan->id & 1) * 6));
+ dma_isr = stm32_dma_read(dmadev, STM32_DMA_ISR(chan->id));
+ flags = dma_isr >> STM32_DMA_FLAGS_SHIFT(chan->id);
return flags & STM32_DMA_MASKI;
}
@@ -424,17 +425,11 @@ static void stm32_dma_irq_clear(struct stm32_dma_chan *chan, u32 flags)
/*
* Write "flags" to the DMA_xIFCR register corresponding to the selected
* DMA channel at the correct bit offset inside that register.
- *
- * If (ch % 4) is 2 or 3, left shift the mask by 16 bits.
- * If (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits.
*/
flags &= STM32_DMA_MASKI;
- dma_ifcr = flags << (((chan->id & 2) << 3) | ((chan->id & 1) * 6));
+ dma_ifcr = flags << STM32_DMA_FLAGS_SHIFT(chan->id);
- if (chan->id & 4)
- stm32_dma_write(dmadev, STM32_DMA_HIFCR, dma_ifcr);
- else
- stm32_dma_write(dmadev, STM32_DMA_LIFCR, dma_ifcr);
+ stm32_dma_write(dmadev, STM32_DMA_IFCR(chan->id), dma_ifcr);
}
static int stm32_dma_disable_chan(struct stm32_dma_chan *chan)
Channels 0 to 3 flags are described in DMA_LISR and DMA_LIFCR (L as Low). Channels 4 to 7 flags are described in DMA_HISR and DMA_HIFCR (H as High). Macro STM32_DMA_ISR(n) returns the interrupt status register offset for the channel id (n). Macro STM32_DMA_IFCR(n) returns the interrupt flag clear register offset for the channel id (n). If chan->id % 4 = 2 or 3, then its flags are left-shifted by 16 bits. If chan->id % 4 = 1 or 3, then its flags are additionally left-shifted by 6 bits. If chan->id % 4 = 0, then its flags are not shifted. Macro STM32_DMA_FLAGS_SHIFT(n) returns the required shift to get or set the channel flags mask. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> --- Introduced in patchset v3 to ease readibility of code. --- drivers/dma/stm32-dma.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-)