@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
+#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/slab.h>
@@ -161,7 +162,10 @@
#define TEGRA_GPCDMA_BURST_COMPLETION_TIMEOUT 5000 /* 5 msec */
/* Channel base address offset from GPCDMA base address */
-#define TEGRA_GPCDMA_CHANNEL_BASE_ADD_OFFSET 0x20000
+#define TEGRA_GPCDMA_CHANNEL_BASE_ADDR_OFFSET 0x10000
+
+/* Default channel mask reserving channel0 */
+#define TEGRA_GPCDMA_DEFAULT_CHANNEL_MASK 0xfffffffe
struct tegra_dma;
struct tegra_dma_channel;
@@ -246,6 +250,7 @@ struct tegra_dma {
const struct tegra_dma_chip_data *chip_data;
unsigned long sid_m2d_reserved;
unsigned long sid_d2m_reserved;
+ u32 chan_mask;
void __iomem *base_addr;
struct device *dev;
struct dma_device dma_dev;
@@ -1288,7 +1293,7 @@ static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
}
static const struct tegra_dma_chip_data tegra186_dma_chip_data = {
- .nr_channels = 31,
+ .nr_channels = 32,
.channel_reg_size = SZ_64K,
.max_dma_count = SZ_1G,
.hw_support_pause = false,
@@ -1296,7 +1301,7 @@ static const struct tegra_dma_chip_data tegra186_dma_chip_data = {
};
static const struct tegra_dma_chip_data tegra194_dma_chip_data = {
- .nr_channels = 31,
+ .nr_channels = 32,
.channel_reg_size = SZ_64K,
.max_dma_count = SZ_1G,
.hw_support_pause = true,
@@ -1304,7 +1309,7 @@ static const struct tegra_dma_chip_data tegra194_dma_chip_data = {
};
static const struct tegra_dma_chip_data tegra234_dma_chip_data = {
- .nr_channels = 31,
+ .nr_channels = 32,
.channel_reg_size = SZ_64K,
.max_dma_count = SZ_1G,
.hw_support_pause = true,
@@ -1346,7 +1351,7 @@ static int tegra_dma_probe(struct platform_device *pdev)
struct iommu_fwspec *iommu_spec;
unsigned int stream_id, i;
struct tegra_dma *tdma;
- int ret;
+ int ret, chan_count = 0;
cdata = of_device_get_match_data(&pdev->dev);
@@ -1380,15 +1385,34 @@ static int tegra_dma_probe(struct platform_device *pdev)
}
stream_id = iommu_spec->ids[0] & 0xffff;
+ ret = device_property_read_u32(&pdev->dev, "dma-channel-mask",
+ &tdma->chan_mask);
+ if (ret) {
+ dev_warn(&pdev->dev,
+ "Missing dma-channel-mask property, using default channel mask %#x\n",
+ TEGRA_GPCDMA_DEFAULT_CHANNEL_MASK);
+ tdma->chan_mask = TEGRA_GPCDMA_DEFAULT_CHANNEL_MASK;
+ }
+
+ if (of_irq_count(pdev->dev.of_node) != hweight_long(tdma->chan_mask)) {
+ dev_err(&pdev->dev, "IRQ count mismatch with channels\n");
+ return -EINVAL;
+ }
+
INIT_LIST_HEAD(&tdma->dma_dev.channels);
for (i = 0; i < cdata->nr_channels; i++) {
struct tegra_dma_channel *tdc = &tdma->channels[i];
- tdc->irq = platform_get_irq(pdev, i);
+ /* Check for channel mask */
+ if (!(tdma->chan_mask & BIT(i)))
+ continue;
+
+ tdc->irq = platform_get_irq(pdev, chan_count);
if (tdc->irq < 0)
return tdc->irq;
- tdc->chan_base_offset = TEGRA_GPCDMA_CHANNEL_BASE_ADD_OFFSET +
+ chan_count++;
+ tdc->chan_base_offset = TEGRA_GPCDMA_CHANNEL_BASE_ADDR_OFFSET +
i * cdata->channel_reg_size;
snprintf(tdc->name, sizeof(tdc->name), "gpcdma.%d", i);
tdc->tdma = tdma;
@@ -1449,8 +1473,7 @@ static int tegra_dma_probe(struct platform_device *pdev)
return ret;
}
- dev_info(&pdev->dev, "GPC DMA driver register %d channels\n",
- cdata->nr_channels);
+ dev_info(&pdev->dev, "GPC DMA driver register %d channels\n", chan_count);
return 0;
}
@@ -1473,6 +1496,9 @@ static int __maybe_unused tegra_dma_pm_suspend(struct device *dev)
for (i = 0; i < tdma->chip_data->nr_channels; i++) {
struct tegra_dma_channel *tdc = &tdma->channels[i];
+ if (!(tdma->chan_mask & BIT(i)))
+ continue;
+
if (tdc->dma_desc) {
dev_err(tdma->dev, "channel %u busy\n", i);
return -EBUSY;
@@ -1492,6 +1518,9 @@ static int __maybe_unused tegra_dma_pm_resume(struct device *dev)
for (i = 0; i < tdma->chip_data->nr_channels; i++) {
struct tegra_dma_channel *tdc = &tdma->channels[i];
+ if (!(tdma->chan_mask & BIT(i)))
+ continue;
+
tegra_dma_program_sid(tdc, tdc->stream_id);
}
Add support for dma-channel-mask so that only the specified channels are used. This helps to reserve some channels for the firmware. This was initially achieved by limiting the channel number to 31 in the driver and adjusting the register address to skip channel0 which was reserved for a firmware. Now, with this change, the driver can align more to the actual hardware which has 32 channels. Signed-off-by: Akhil R <akhilrajeev@nvidia.com> --- drivers/dma/tegra186-gpc-dma.c | 47 +++++++++++++++++++++++++++------- 1 file changed, 38 insertions(+), 9 deletions(-)