diff mbox series

[v2,04/10] dma-engine: sun4i: Add support for Allwinner suniv F1C100s

Message ID 20241027091440.1913863-4-csokas.bence@prolan.hu (mailing list archive)
State New
Headers show
Series [v2,01/10] dma-engine: sun4i: Add a quirk to support different chips | expand

Commit Message

Csókás, Bence Oct. 27, 2024, 9:14 a.m. UTC 
From: Mesih Kilinc <mesihkilinc@gmail.com>

DMA of Allwinner suniv F1C100s is similar to sun4i. It has 4 NDMA, 4
DDMA channels and endpoints are different. Also F1C100s has reset bit
for DMA in CCU. Add support for it.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
[ csokas.bence: Rebased on current master ]
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
---
 drivers/dma/Kconfig     |  4 +--
 drivers/dma/sun4i-dma.c | 60 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index d9ec1e69e428..fc25bfc356f3 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -162,8 +162,8 @@  config DMA_SA11X0
 
 config DMA_SUN4I
 	tristate "Allwinner A10 DMA SoCs support"
-	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
-	default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
+	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNIV
+	default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNIV)
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c
index 0a45089461e1..cb52976b56aa 100644
--- a/drivers/dma/sun4i-dma.c
+++ b/drivers/dma/sun4i-dma.c
@@ -33,7 +33,11 @@ 
 #define SUN4I_DMA_CFG_SRC_ADDR_MODE(mode)	((mode) << 5)
 #define SUN4I_DMA_CFG_SRC_DRQ_TYPE(type)	(type)
 
+#define SUNIV_DMA_CFG_DST_DATA_WIDTH(width)	((width) << 24)
+#define SUNIV_DMA_CFG_SRC_DATA_WIDTH(width)	((width) << 8)
+
 #define SUN4I_MAX_BURST	8
+#define SUNIV_MAX_BURST	4
 
 /** Normal DMA register values **/
 
@@ -41,6 +45,9 @@ 
 #define SUN4I_NDMA_DRQ_TYPE_SDRAM		0x16
 #define SUN4I_NDMA_DRQ_TYPE_LIMIT		(0x1F + 1)
 
+#define SUNIV_NDMA_DRQ_TYPE_SDRAM		0x11
+#define SUNIV_NDMA_DRQ_TYPE_LIMIT		(0x17 + 1)
+
 /** Normal DMA register layout **/
 
 /* Dedicated DMA source/destination address mode values */
@@ -54,6 +61,9 @@ 
 #define SUN4I_NDMA_CFG_BYTE_COUNT_MODE_REMAIN	BIT(15)
 #define SUN4I_NDMA_CFG_SRC_NON_SECURE		BIT(6)
 
+#define SUNIV_NDMA_CFG_CONT_MODE		BIT(29)
+#define SUNIV_NDMA_CFG_WAIT_STATE(n)		((n) << 26)
+
 /** Dedicated DMA register values **/
 
 /* Dedicated DMA source/destination address mode values */
@@ -66,6 +76,9 @@ 
 #define SUN4I_DDMA_DRQ_TYPE_SDRAM		0x1
 #define SUN4I_DDMA_DRQ_TYPE_LIMIT		(0x1F + 1)
 
+#define SUNIV_DDMA_DRQ_TYPE_SDRAM		0x1
+#define SUNIV_DDMA_DRQ_TYPE_LIMIT		(0x9 + 1)
+
 /** Dedicated DMA register layout **/
 
 /* Dedicated DMA configuration register layout */
@@ -119,6 +132,11 @@ 
 #define SUN4I_DMA_NR_MAX_VCHANS						\
 	(SUN4I_NDMA_NR_MAX_VCHANS + SUN4I_DDMA_NR_MAX_VCHANS)
 
+#define SUNIV_NDMA_NR_MAX_CHANNELS	4
+#define SUNIV_DDMA_NR_MAX_CHANNELS	4
+#define SUNIV_NDMA_NR_MAX_VCHANS	(24 * 2 - 1)
+#define SUNIV_DDMA_NR_MAX_VCHANS	10
+
 /* This set of SUN4I_DDMA timing parameters were found experimentally while
  * working with the SPI driver and seem to make it behave correctly */
 #define SUN4I_DDMA_MAGIC_SPI_PARAMETERS \
@@ -243,6 +261,16 @@  static void set_src_data_width_a10(u32 *p_cfg, s8 data_width)
 	*p_cfg |= SUN4I_DMA_CFG_SRC_DATA_WIDTH(data_width);
 }
 
+static void set_dst_data_width_f1c100s(u32 *p_cfg, s8 data_width)
+{
+	*p_cfg |= SUNIV_DMA_CFG_DST_DATA_WIDTH(data_width);
+}
+
+static void set_src_data_width_f1c100s(u32 *p_cfg, s8 data_width)
+{
+	*p_cfg |= SUNIV_DMA_CFG_SRC_DATA_WIDTH(data_width);
+}
+
 static int convert_burst_a10(u32 maxburst)
 {
 	if (maxburst > 8)
@@ -252,6 +280,15 @@  static int convert_burst_a10(u32 maxburst)
 	return (maxburst >> 2);
 }
 
+static int convert_burst_f1c100s(u32 maxburst)
+{
+	if (maxburst > 4)
+		return -EINVAL;
+
+	/* 1 -> 0, 4 -> 1 */
+	return (maxburst >> 2);
+}
+
 static int convert_buswidth(enum dma_slave_buswidth addr_width)
 {
 	if (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES)
@@ -1379,8 +1416,31 @@  static struct sun4i_dma_config sun4i_a10_dma_cfg = {
 	.has_reset		= false,
 };
 
+static struct sun4i_dma_config suniv_f1c100s_dma_cfg = {
+	.ndma_nr_max_channels	= SUNIV_NDMA_NR_MAX_CHANNELS,
+	.ndma_nr_max_vchans	= SUNIV_NDMA_NR_MAX_VCHANS,
+
+	.ddma_nr_max_channels	= SUNIV_DDMA_NR_MAX_CHANNELS,
+	.ddma_nr_max_vchans	= SUNIV_DDMA_NR_MAX_VCHANS,
+
+	.dma_nr_max_channels	= SUNIV_NDMA_NR_MAX_CHANNELS +
+		SUNIV_DDMA_NR_MAX_CHANNELS,
+
+	.set_dst_data_width	= set_dst_data_width_f1c100s,
+	.set_src_data_width	= set_src_data_width_f1c100s,
+	.convert_burst		= convert_burst_f1c100s,
+
+	.ndma_drq_sdram		= SUNIV_NDMA_DRQ_TYPE_SDRAM,
+	.ddma_drq_sdram		= SUNIV_DDMA_DRQ_TYPE_SDRAM,
+
+	.max_burst		= SUNIV_MAX_BURST,
+	.has_reset		= true,
+};
+
 static const struct of_device_id sun4i_dma_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-dma", .data = &sun4i_a10_dma_cfg },
+	{ .compatible = "allwinner,suniv-f1c100s-dma",
+		.data = &suniv_f1c100s_dma_cfg },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_dma_match);