@@ -4404,6 +4404,18 @@ static struct udma_match_data j721s2_bcdma_csi_data = {
.soc_data = &j721s2_bcdma_csi_soc_data,
};
+static struct udma_match_data j722s_bcdma_csi_data = {
+ .type = DMA_TYPE_BCDMA,
+ .psil_base = 0x3100,
+ .enable_memcpy_support = false,
+ .burst_size = {
+ TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* Normal Channels */
+ 0, /* No H Channels */
+ 0, /* No UH Channels */
+ },
+ .soc_data = &j721s2_bcdma_csi_soc_data,
+};
+
static const struct of_device_id udma_of_match[] = {
{
.compatible = "ti,am654-navss-main-udmap",
@@ -4435,6 +4447,10 @@ static const struct of_device_id udma_of_match[] = {
.compatible = "ti,j721s2-dmss-bcdma-csi",
.data = &j721s2_bcdma_csi_data,
},
+ {
+ .compatible = "ti,j722s-dmss-bcdma-csi",
+ .data = &j722s_bcdma_csi_data,
+ },
{ /* Sentinel */ },
};
MODULE_DEVICE_TABLE(of, udma_of_match);
J722S CSI BCDMA is similar to J721S2 CSI BCDMA but there are slight integration differences like different PSIL thread base ID which is handled in the driver. Add an entry to support J722S CSIRX. J722S TRM (11.2 Data Movement Subsystem): https://www.ti.com/lit/zip/sprujb3 Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> --- V1->V2: * Add new compatible for J722S instead of modifying AM62A V1: https://lore.kernel.org/all/20241125083914.2934815-2-vaishnav.a@ti.com/ CSI2RX capture test results on J722S EVM with 4 x IMX219: https://gist.github.com/vaishnavachath/e2eaed62ee8f53428ee9b830aaa02cc3 drivers/dma/ti/k3-udma.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)