@@ -36,13 +36,15 @@
#define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14
#define BCM2835_DMA_CHAN_NAME_SIZE 8
+#define BCM2711_DMA40_PHYS_ADDR 0x400000000ULL
+#define BCM2835_DMA_ABORT_TIMEOUT 100
/**
* struct bcm2835_dmadev - BCM2835 DMA controller
* @ddev: DMA device
* @base: base address of register map
* @zero_page: bus address of zero page (to detect transactions copying from
- * zero page and avoid accessing memory if so)
+ * zero page and avoid accessing memory if so)
*/
struct bcm2835_dmadev {
struct dma_device ddev;
@@ -52,7 +54,7 @@ struct bcm2835_dmadev {
};
struct bcm_dma_cb {
- uint32_t rsvd[8];
+ u32 rsvd[8];
};
struct bcm2835_dma_cb {
@@ -65,6 +67,17 @@ struct bcm2835_dma_cb {
u32 pad[2];
};
+struct bcm2711_dma40_scb {
+ u32 ti;
+ u32 src;
+ u32 srci;
+ u32 dst;
+ u32 dsti;
+ u32 len;
+ u32 next_cb;
+ u32 rsvd;
+};
+
struct bcm2835_cb_entry {
struct bcm_dma_cb *cb;
dma_addr_t paddr;
@@ -102,14 +115,16 @@ struct bcm2835_dma_cfg {
u32 s_dreq_mask;
u32 d_dreq_mask;
+ u64 dma_mask;
+
u32 (*cb_get_length)(void *data);
dma_addr_t (*cb_get_addr)(void *data, enum dma_transfer_direction);
void (*cb_init)(void *data, struct bcm2835_chan *c,
- enum dma_transfer_direction, u32 src, u32 dst,
+ enum dma_transfer_direction, dma_addr_t src, dma_addr_t dst,
bool zero_page);
- void (*cb_set_src)(void *data, enum dma_transfer_direction, u32 src);
- void (*cb_set_dst)(void *data, enum dma_transfer_direction, u32 dst);
+ void (*cb_set_src)(void *data, enum dma_transfer_direction, dma_addr_t src);
+ void (*cb_set_dst)(void *data, enum dma_transfer_direction, dma_addr_t dst);
void (*cb_set_next)(void *data, u32 next);
void (*cb_set_length)(void *data, u32 length);
void (*cb_append_extra)(void *data,
@@ -123,6 +138,7 @@ struct bcm2835_dma_cfg {
dma_addr_t (*read_addr)(struct bcm2835_chan *c,
enum dma_transfer_direction);
u32 (*cs_flags)(struct bcm2835_chan *c);
+ void (*dma_abort)(struct bcm2835_chan *c, const struct bcm2835_dma_cfg *cfg);
};
struct bcm2835_desc {
@@ -233,13 +249,110 @@ struct bcm2835_desc {
#define BCM2835_DMA_DATA_TYPE_S128 16
/* Valid only for channels 0 - 14, 15 has its own base address */
-#define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */
+#define BCM2835_DMA_CHAN_SIZE 0x100
+#define BCM2835_DMA_CHAN(n) ((n) * BCM2835_DMA_CHAN_SIZE) /* Base address */
#define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n))
+/* 40-bit DMA support */
+#define BCM2711_DMA40_CS 0x00
+#define BCM2711_DMA40_CB 0x04
+#define BCM2711_DMA40_DEBUG 0x0c
+#define BCM2711_DMA40_TI 0x10
+#define BCM2711_DMA40_SRC 0x14
+#define BCM2711_DMA40_SRCI 0x18
+#define BCM2711_DMA40_DEST 0x1c
+#define BCM2711_DMA40_DESTI 0x20
+#define BCM2711_DMA40_LEN 0x24
+#define BCM2711_DMA40_NEXT_CB 0x28
+#define BCM2711_DMA40_DEBUG2 0x2c
+
+#define BCM2711_DMA40_ACTIVE BIT(0)
+#define BCM2711_DMA40_END BIT(1)
+#define BCM2711_DMA40_INT BIT(2)
+#define BCM2711_DMA40_DREQ BIT(3) /* DREQ state */
+#define BCM2711_DMA40_RD_PAUSED BIT(4) /* Reading is paused */
+#define BCM2711_DMA40_WR_PAUSED BIT(5) /* Writing is paused */
+#define BCM2711_DMA40_DREQ_PAUSED BIT(6) /* Is paused by DREQ flow control */
+#define BCM2711_DMA40_WAITING_FOR_WRITES BIT(7) /* Waiting for last write */
+#define BCM2711_DMA40_ERR BIT(10)
+#define BCM2711_DMA40_QOS(x) FIELD_PREP(GENMASK(19, 16), x)
+#define BCM2711_DMA40_PANIC_QOS(x) FIELD_PREP(GENMASK(23, 20), x)
+#define BCM2711_DMA40_WAIT_FOR_WRITES BIT(28)
+#define BCM2711_DMA40_DISDEBUG BIT(29)
+#define BCM2711_DMA40_ABORT BIT(30)
+#define BCM2711_DMA40_HALT BIT(31)
+// we always want to run in supervisor mode
+#define BCM2711_DMA40_PROT (BIT(8) | BIT(9))
+#define BCM2711_DMA40_TRANSACTIONS BIT(25)
+#define BCM2711_DMA40_CS_FLAGS(x) ((x) & (BCM2711_DMA40_QOS(15) | \
+ BCM2711_DMA40_PANIC_QOS(15) | \
+ BCM2711_DMA40_WAIT_FOR_WRITES | \
+ BCM2711_DMA40_DISDEBUG))
+
+/* Transfer information bits */
+#define BCM2711_DMA40_INTEN BIT(0)
+#define BCM2711_DMA40_TDMODE BIT(1) /* 2D-Mode */
+#define BCM2711_DMA40_WAIT_RESP BIT(2) /* wait for AXI write to be acked */
+#define BCM2711_DMA40_WAIT_RD_RESP BIT(3) /* wait for AXI read to complete */
+#define BCM2711_DMA40_PER_MAP(x) (((x) & 31) << 9) /* REQ source */
+#define BCM2711_DMA40_S_DREQ BIT(14) /* enable SREQ for source */
+#define BCM2711_DMA40_D_DREQ BIT(15) /* enable DREQ for destination */
+#define BCM2711_DMA40_S_WAIT(x) FIELD_PREP(GENMASK(23, 16), x) /* add DMA read-wait cycles */
+#define BCM2711_DMA40_D_WAIT(x) FIELD_PREP(GENMASK(31, 24), x) /* add DMA write-wait cycles */
+
+#define BCM2711_DMA40_INC BIT(12)
+#define BCM2711_DMA40_IGNORE BIT(15)
+
/* the max dma length for different channels */
#define MAX_DMA_LEN SZ_1G
#define MAX_LITE_DMA_LEN (SZ_64K - 4)
+/* debug register bits */
+#define BCM2711_DMA40_DEBUG_WRITE_ERR BIT(0)
+#define BCM2711_DMA40_DEBUG_FIFO_ERR BIT(1)
+#define BCM2711_DMA40_DEBUG_READ_ERR BIT(2)
+#define BCM2711_DMA40_DEBUG_READ_CB_ERR BIT(3)
+#define BCM2711_DMA40_DEBUG_IN_ON_ERR BIT(8)
+#define BCM2711_DMA40_DEBUG_ABORT_ON_ERR BIT(9)
+#define BCM2711_DMA40_DEBUG_HALT_ON_ERR BIT(10)
+#define BCM2711_DMA40_DEBUG_DISABLE_CLK_GATE BIT(11)
+#define BCM2711_DMA40_DEBUG_RSTATE_SHIFT 14
+#define BCM2711_DMA40_DEBUG_RSTATE_BITS 4
+#define BCM2711_DMA40_DEBUG_WSTATE_SHIFT 18
+#define BCM2711_DMA40_DEBUG_WSTATE_BITS 4
+#define BCM2711_DMA40_DEBUG_RESET BIT(23)
+#define BCM2711_DMA40_DEBUG_ID_SHIFT 24
+#define BCM2711_DMA40_DEBUG_ID_BITS 4
+#define BCM2711_DMA40_DEBUG_VERSION_SHIFT 28
+#define BCM2711_DMA40_DEBUG_VERSION_BITS 4
+
+/* Valid only for channels 0 - 3 (11 - 14) */
+#define BCM2711_DMA40_CHAN(n) (((n) + 11) << 8) /* Base address */
+#define BCM2711_DMA40_CHANIO(base, n) ((base) + BCM2711_DMA_CHAN(n))
+
+/* the max dma length for different channels */
+#define MAX_DMA40_LEN SZ_1G
+
+#define BCM2711_DMA40_BURST_LEN(x) (((x) & 15) << 8)
+#define BCM2711_DMA40_INC BIT(12)
+#define BCM2711_DMA40_SIZE_32 (0 << 13)
+#define BCM2711_DMA40_SIZE_64 (1 << 13)
+#define BCM2711_DMA40_SIZE_128 (2 << 13)
+#define BCM2711_DMA40_SIZE_256 (3 << 13)
+#define BCM2711_DMA40_IGNORE BIT(15)
+#define BCM2711_DMA40_STRIDE(x) ((x) << 16) /* For 2D mode */
+
+#define BCM2711_DMA40_MEMCPY_FLAGS \
+ (BCM2711_DMA40_QOS(0) | \
+ BCM2711_DMA40_PANIC_QOS(0) | \
+ BCM2711_DMA40_WAIT_FOR_WRITES | \
+ BCM2711_DMA40_DISDEBUG)
+
+#define BCM2711_DMA40_MEMCPY_XFER_INFO \
+ (BCM2711_DMA40_SIZE_128 | \
+ BCM2711_DMA40_INC | \
+ BCM2711_DMA40_BURST_LEN(16))
+
static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c)
{
/* lite and normal channels have different max frame length */
@@ -270,8 +383,7 @@ static inline struct bcm2835_chan *to_bcm2835_dma_chan(struct dma_chan *c)
return container_of(c, struct bcm2835_chan, vc.chan);
}
-static inline struct bcm2835_desc *to_bcm2835_dma_desc(
- struct dma_async_tx_descriptor *t)
+static inline struct bcm2835_desc *to_bcm2835_dma_desc(struct dma_async_tx_descriptor *t)
{
return container_of(t, struct bcm2835_desc, vd.tx);
}
@@ -296,9 +408,8 @@ static u32 bcm2835_dma_prepare_cb_info(struct bcm2835_chan *c,
result |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC;
/* non-lite channels can write zeroes w/o accessing memory */
- if (zero_page && !c->is_lite_channel) {
+ if (zero_page && !c->is_lite_channel)
result |= BCM2835_DMA_S_IGNORE;
- }
}
return result;
@@ -324,6 +435,66 @@ static u32 bcm2835_dma_prepare_cb_extra(struct bcm2835_chan *c,
return result;
}
+static inline uint32_t to_bcm2711_ti(uint32_t info)
+{
+ return ((info & BCM2835_DMA_INT_EN) ? BCM2711_DMA40_INTEN : 0) |
+ ((info & BCM2835_DMA_WAIT_RESP) ? BCM2711_DMA40_WAIT_RESP : 0) |
+ ((info & BCM2835_DMA_S_DREQ) ?
+ (BCM2711_DMA40_S_DREQ | BCM2711_DMA40_WAIT_RD_RESP) : 0) |
+ ((info & BCM2835_DMA_D_DREQ) ? BCM2711_DMA40_D_DREQ : 0) |
+ BCM2711_DMA40_PER_MAP((info >> 16) & 0x1f);
+}
+
+static inline uint32_t to_bcm2711_srci(uint32_t info)
+{
+ return ((info & BCM2835_DMA_S_INC) ? BCM2711_DMA40_INC : 0) |
+ ((info & BCM2835_DMA_S_WIDTH) ? BCM2711_DMA40_SIZE_128 : 0) |
+ BCM2711_DMA40_BURST_LEN(BCM2835_DMA_GET_BURST_LENGTH(info));
+}
+
+static inline uint32_t to_bcm2711_dsti(uint32_t info)
+{
+ return ((info & BCM2835_DMA_D_INC) ? BCM2711_DMA40_INC : 0) |
+ ((info & BCM2835_DMA_D_WIDTH) ? BCM2711_DMA40_SIZE_128 : 0) |
+ BCM2711_DMA40_BURST_LEN(BCM2835_DMA_GET_BURST_LENGTH(info));
+}
+
+static u32 bcm2711_dma_prepare_cb_info(struct bcm2835_chan *c,
+ enum dma_transfer_direction direction,
+ bool zero_page)
+{
+ u32 result = 0;
+ u32 info;
+
+ info = bcm2835_dma_prepare_cb_info(c, direction, zero_page);
+ result = to_bcm2711_ti(info);
+
+ return result;
+}
+
+static u32 bcm2711_dma_prepare_cb_extra(struct bcm2835_chan *c,
+ enum dma_transfer_direction direction,
+ bool cyclic, bool final,
+ unsigned long flags)
+{
+ u32 result = 0;
+
+ if (cyclic) {
+ if (flags & DMA_PREP_INTERRUPT)
+ result |= BCM2711_DMA40_INTEN;
+ } else {
+ if (!final)
+ return 0;
+
+ result |= BCM2711_DMA40_INTEN;
+
+ if (direction == DMA_MEM_TO_MEM)
+ result |= BCM2711_DMA40_WAIT_RESP;
+ }
+
+ return result;
+}
+
static inline bool need_src_incr(enum dma_transfer_direction direction)
{
return direction != DMA_DEV_TO_MEM;
@@ -342,6 +513,12 @@ static inline bool need_dst_incr(enum dma_transfer_direction direction)
return false;
}
+static inline uint32_t to_bcm2711_cbaddr(dma_addr_t addr)
+{
+ WARN_ON_ONCE(addr & 0x1f);
+ return (addr >> 5);
+}
+
static inline u32 bcm2835_dma_cb_get_length(void *data)
{
struct bcm2835_dma_cb *cb = data;
@@ -362,7 +539,7 @@ bcm2835_dma_cb_get_addr(void *data, enum dma_transfer_direction direction)
static inline void
bcm2835_dma_cb_init(void *data, struct bcm2835_chan *c,
- enum dma_transfer_direction direction, u32 src, u32 dst,
+ enum dma_transfer_direction direction, dma_addr_t src, dma_addr_t dst,
bool zero_page)
{
struct bcm2835_dma_cb *cb = data;
@@ -376,7 +553,7 @@ bcm2835_dma_cb_init(void *data, struct bcm2835_chan *c,
static inline void
bcm2835_dma_cb_set_src(void *data, enum dma_transfer_direction direction,
- u32 src)
+ dma_addr_t src)
{
struct bcm2835_dma_cb *cb = data;
@@ -385,7 +562,7 @@ bcm2835_dma_cb_set_src(void *data, enum dma_transfer_direction direction,
static inline void
bcm2835_dma_cb_set_dst(void *data, enum dma_transfer_direction direction,
- u32 dst)
+ dma_addr_t dst)
{
struct bcm2835_dma_cb *cb = data;
@@ -445,6 +622,124 @@ static u32 bcm2835_dma_cs_flags(struct bcm2835_chan *c)
return BCM2835_DMA_CS_FLAGS(c->dreq);
}
+static inline u32 bcm2711_dma_cb_get_length(void *data)
+{
+ struct bcm2711_dma40_scb *scb = data;
+
+ return scb->len;
+}
+
+static inline dma_addr_t
+bcm2711_dma_cb_get_addr(void *data, enum dma_transfer_direction direction)
+{
+ struct bcm2711_dma40_scb *scb = data;
+
+ if (direction == DMA_DEV_TO_MEM)
+ return (dma_addr_t)scb->dst + ((dma_addr_t)(scb->dsti & 0xff) << 32);
+
+ return (dma_addr_t)scb->src + ((dma_addr_t)(scb->srci & 0xff) << 32);
+}
+
+static inline void
+bcm2711_dma_cb_init(void *data, struct bcm2835_chan *c,
+ enum dma_transfer_direction direction, dma_addr_t src, dma_addr_t dst,
+ bool zero_page)
+{
+ struct bcm2711_dma40_scb *scb = data;
+ u32 info = bcm2835_dma_prepare_cb_info(c, direction, zero_page);
+
+ scb->ti = bcm2711_dma_prepare_cb_info(c, direction, zero_page);
+
+ scb->src = lower_32_bits(src);
+ scb->srci = upper_32_bits(src);
+ scb->srci |= to_bcm2711_srci(info);
+
+ scb->dst = lower_32_bits(dst);
+ scb->dsti = upper_32_bits(dst);
+ scb->dsti |= to_bcm2711_dsti(info);
+
+ scb->next_cb = 0;
+}
+
+static inline void
+bcm2711_dma_cb_set_src(void *data, enum dma_transfer_direction direction,
+ dma_addr_t src)
+{
+ struct bcm2711_dma40_scb *scb = data;
+
+ scb->src = lower_32_bits(src);
+ scb->srci = upper_32_bits(src);
+
+ if (need_src_incr(direction))
+ scb->srci |= BCM2711_DMA40_INC;
+}
+
+static inline void
+bcm2711_dma_cb_set_dst(void *data, enum dma_transfer_direction direction,
+ dma_addr_t dst)
+{
+ struct bcm2711_dma40_scb *scb = data;
+
+ scb->dst = lower_32_bits(dst);
+ scb->dsti = upper_32_bits(dst);
+
+ if (need_dst_incr(direction))
+ scb->dsti |= BCM2711_DMA40_INC;
+}
+
+static inline void bcm2711_dma_cb_set_next(void *data, u32 next)
+{
+ struct bcm2711_dma40_scb *scb = data;
+
+ scb->next_cb = next;
+}
+
+static inline void bcm2711_dma_cb_set_length(void *data, u32 length)
+{
+ struct bcm2711_dma40_scb *scb = data;
+
+ scb->len = length;
+}
+
+static inline void
+bcm2711_dma_cb_append_extra(void *data, struct bcm2835_chan *c,
+ enum dma_transfer_direction direction,
+ bool cyclic, bool final, unsigned long flags)
+{
+ struct bcm2711_dma40_scb *scb = data;
+
+ scb->ti |= bcm2711_dma_prepare_cb_extra(c, direction, cyclic, final,
+ flags);
+}
+
+static inline dma_addr_t bcm2711_dma_to_cb_addr(dma_addr_t addr)
+{
+ WARN_ON_ONCE(addr & 0x1f);
+ return (addr >> 5);
+}
+
+static void bcm2711_dma_chan_plat_init(struct bcm2835_chan *c)
+{
+}
+
+static dma_addr_t bcm2711_dma_read_addr(struct bcm2835_chan *c,
+ enum dma_transfer_direction direction)
+{
+ if (direction == DMA_MEM_TO_DEV)
+ return (dma_addr_t)readl(c->chan_base + BCM2711_DMA40_SRC) +
+ ((dma_addr_t)(readl(c->chan_base + BCM2711_DMA40_SRCI) & 0xff) << 32);
+ else if (direction == DMA_DEV_TO_MEM)
+ return (dma_addr_t)readl(c->chan_base + BCM2711_DMA40_DEST) +
+ ((dma_addr_t)(readl(c->chan_base + BCM2711_DMA40_DESTI) & 0xff) << 32);
+
+ return 0;
+}
+
+static u32 bcm2711_dma_cs_flags(struct bcm2835_chan *c)
+{
+ return BCM2711_DMA40_CS_FLAGS(c->dreq) | BCM2711_DMA40_PROT;
+}
+
static void bcm2835_dma_free_cb_chain(struct bcm2835_desc *desc)
{
size_t i;
@@ -470,36 +765,34 @@ static bool bcm2835_dma_create_cb_set_length(struct dma_chan *chan,
const struct bcm2835_dma_cfg *cfg = to_bcm2835_cfg(chan->device);
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
size_t max_len = bcm2835_dma_max_frame_length(c);
+ u32 cb_len;
/* set the length taking lite-channel limitations into account */
- u32 length = min_t(u32, len, max_len);
+ cb_len = min_t(u32, len, max_len);
- cfg->cb_set_length(data, length);
+ if (period_len) {
+ /*
+ * period_len means: that we need to generate
+ * transfers that are terminating at every
+ * multiple of period_len - this is typically
+ * used to set the interrupt flag in info
+ * which is required during cyclic transfers
+ */
- /* finished if we have no period_length */
- if (!period_len)
- return false;
+ /* have we filled in period_length yet? */
+ if (*total_len + cb_len < period_len) {
+ /* update number of bytes in this period so far */
+ *total_len += cb_len;
+ } else {
+ /* calculate the length that remains to reach period_len */
+ cb_len = period_len - *total_len;
- /*
- * period_len means: that we need to generate
- * transfers that are terminating at every
- * multiple of period_len - this is typically
- * used to set the interrupt flag in info
- * which is required during cyclic transfers
- */
-
- /* have we filled in period_length yet? */
- if (*total_len + length < period_len) {
- /* update number of bytes in this period so far */
- *total_len += length;
- return false;
+ /* reset total_length for next period */
+ *total_len = 0;
+ }
}
- /* calculate the length that remains to reach period_length */
- cfg->cb_set_length(data, period_len - *total_len);
-
- /* reset total_length for next period */
- *total_len = 0;
+ cfg->cb_set_length(data, cb_len);
return true;
}
@@ -523,7 +816,7 @@ static inline size_t bcm2835_dma_count_frames_for_sg(struct bcm2835_chan *c,
/**
* bcm2835_dma_create_cb_chain - create a control block and fills data in
*
- * @chan: the @dma_chan for which we run this
+ * @c: the @bcm2835_chan for which we run this
* @direction: the direction in which we transfer
* @cyclic: it is a cyclic transfer
* @frames: number of controlblocks to allocate
@@ -587,17 +880,19 @@ static struct bcm2835_desc *bcm2835_dma_create_cb_chain(
/* fill in the control block */
control_block = cb_entry->cb;
- cfg->cb_init(control_block, c, src, dst, direction, zero_page);
+
+ cfg->cb_init(control_block, c, direction, src, dst, zero_page);
+
/* set up length in control_block if requested */
if (buf_len) {
/* calculate length honoring period_length */
- if (bcm2835_dma_create_cb_set_length(
- chan, control_block,
- len, period_len, &total_len)) {
- /* add extrainfo bits in info */
- bcm2835_dma_cb_append_extra(control_block, c,
- direction, cyclic,
- false, flags);
+ if (bcm2835_dma_create_cb_set_length(chan, control_block,
+ len, period_len,
+ &total_len)) {
+ /* add extrainfo bits in info */
+ bcm2835_dma_cb_append_extra(control_block, c,
+ direction, cyclic,
+ false, flags);
}
/* calculate new remaining length */
@@ -607,11 +902,12 @@ static struct bcm2835_desc *bcm2835_dma_create_cb_chain(
/* link this the last controlblock */
if (frame)
cfg->cb_set_next(d->cb_list[frame - 1].cb,
- cb_entry->paddr);
+ cfg->to_cb_addr(cb_entry->paddr));
/* update src and dst and length */
if (src && need_src_incr(direction))
src += cfg->cb_get_length(control_block);
+
if (dst && need_dst_incr(direction))
dst += cfg->cb_get_length(control_block);
@@ -621,7 +917,7 @@ static struct bcm2835_desc *bcm2835_dma_create_cb_chain(
/* the last frame requires extra flags */
cfg->cb_append_extra(d->cb_list[d->frames - 1].cb, c, direction, cyclic,
- true, flags);
+ true, flags);
/* detect a size mismatch */
if (buf_len && d->size != buf_len)
@@ -650,7 +946,8 @@ static void bcm2835_dma_fill_cb_chain_with_sg(
max_len = bcm2835_dma_max_frame_length(c);
for_each_sg(sgl, sgent, sg_len, i) {
- for (addr = sg_dma_address(sgent), len = sg_dma_len(sgent);
+ for (addr = sg_dma_address(sgent),
+ len = sg_dma_len(sgent);
len > 0;
addr += cfg->cb_get_length(cb->cb), len -= cfg->cb_get_length(cb->cb), cb++) {
if (direction == DMA_DEV_TO_MEM)
@@ -662,48 +959,81 @@ static void bcm2835_dma_fill_cb_chain_with_sg(
}
}
-static void bcm2835_dma_abort(struct dma_chan *chan)
+static void bcm2835_abort(struct bcm2835_chan *c, const struct bcm2835_dma_cfg *cfg)
{
- const struct bcm2835_dma_cfg *cfg = to_bcm2835_cfg(chan->device);
- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
- void __iomem *chan_base = c->chan_base;
- long timeout = 100;
+ long timeout = BCM2835_DMA_ABORT_TIMEOUT;
- /*
- * A zero control block address means the channel is idle.
- * (The ACTIVE flag in the CS register is not a reliable indicator.)
- */
- if (!readl(chan_base + cfg->cb_reg))
- return;
+ /* Pause the current DMA */
+ writel(readl(c->chan_base + cfg->cs_reg) & ~cfg->active_mask,
+ c->chan_base + cfg->cs_reg);
+
+ /* wait for outstanding transactions to complete */
+ while ((readl(c->chan_base + cfg->cs_reg) & BCM2711_DMA40_TRANSACTIONS) &&
+ --timeout)
+ cpu_relax();
+
+ /* Peripheral might be stuck and fail to complete */
+ if (!timeout)
+ dev_err(c->vc.chan.device->dev,
+ "failed to complete pause on dma %d (CS:%08x)\n", c->ch,
+ readl(c->chan_base + cfg->cs_reg));
+
+ /* Set CS back to default state */
+ writel(BCM2711_DMA40_PROT, c->chan_base + cfg->cs_reg);
+
+ /* Reset the DMA */
+ writel(readl(c->chan_base + BCM2711_DMA40_DEBUG) | BCM2711_DMA40_DEBUG_RESET,
+ c->chan_base + BCM2711_DMA40_DEBUG);
+}
+
+static void bcm2711_abort(struct bcm2835_chan *c, const struct bcm2835_dma_cfg *cfg)
+{
+ long timeout = BCM2835_DMA_ABORT_TIMEOUT;
/* We need to clear the next DMA block pending */
- writel(0, chan_base + cfg->next_reg);
+ writel(0, c->chan_base + cfg->next_reg);
/* Abort the DMA, which needs to be enabled to complete */
- writel(readl(chan_base + cfg->cs_reg) | cfg->abort_mask | cfg->active_mask,
- chan_base + cfg->cs_reg);
+ writel(readl(c->chan_base + cfg->cs_reg) | cfg->abort_mask | cfg->active_mask,
+ c->chan_base + cfg->cs_reg);
/* wait for DMA to be aborted */
- while ((readl(chan_base + cfg->cs_reg) & cfg->abort_mask) && --timeout)
+ while ((readl(c->chan_base + cfg->cs_reg) & cfg->abort_mask) && --timeout)
cpu_relax();
/* Write 0 to the active bit - Pause the DMA */
- writel(readl(chan_base + cfg->cs_reg) & ~cfg->active_mask,
- chan_base + cfg->cs_reg);
+ writel(readl(c->chan_base + cfg->cs_reg) & ~cfg->active_mask,
+ c->chan_base + cfg->cs_reg);
/*
* Peripheral might be stuck and fail to complete
* This is expected when dreqs are enabled but not asserted
* so only report error in non dreq case
*/
- if (!timeout && !(readl(chan_base + cfg->ti_reg) &
+ if (!timeout && !(readl(c->chan_base + cfg->ti_reg) &
(cfg->s_dreq_mask | cfg->d_dreq_mask)))
dev_err(c->vc.chan.device->dev,
"failed to complete pause on dma %d (CS:%08x)\n", c->ch,
- readl(chan_base + cfg->cs_reg));
+ readl(c->chan_base + cfg->cs_reg));
/* Set CS back to default state and reset the DMA */
- writel(cfg->reset_mask, chan_base + cfg->cs_reg);
+ writel(cfg->reset_mask, c->chan_base + cfg->cs_reg);
+}
+
+static void bcm2835_dma_abort(struct dma_chan *chan)
+{
+ const struct bcm2835_dma_cfg *cfg = to_bcm2835_cfg(chan->device);
+ struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
+ void __iomem *chan_base = c->chan_base;
+
+ /*
+ * A zero control block address means the channel is idle.
+ * (The ACTIVE flag in the CS register is not a reliable indicator.)
+ */
+ if (!readl(chan_base + cfg->cb_reg))
+ return;
+
+ cfg->dma_abort(c, cfg);
}
static void bcm2835_dma_start_desc(struct dma_chan *chan)
@@ -722,8 +1052,7 @@ static void bcm2835_dma_start_desc(struct dma_chan *chan)
c->desc = to_bcm2835_dma_desc(&vd->tx);
writel(cfg->to_cb_addr(c->desc->cb_list[0].paddr), c->chan_base + cfg->cb_reg);
- writel(cfg->active_mask | cfg->cs_flags(c),
- c->chan_base + cfg->cs_reg);
+ writel(cfg->active_mask | cfg->cs_flags(c), c->chan_base + cfg->cs_reg);
}
static irqreturn_t bcm2835_dma_callback(int irq, void *data)
@@ -1106,6 +1435,8 @@ static const struct bcm2835_dma_cfg bcm2835_data = {
.s_dreq_mask = BCM2835_DMA_S_DREQ,
.d_dreq_mask = BCM2835_DMA_D_DREQ,
+ .dma_mask = DMA_BIT_MASK(32),
+
.cb_get_length = bcm2835_dma_cb_get_length,
.cb_get_addr = bcm2835_dma_cb_get_addr,
.cb_init = bcm2835_dma_cb_init,
@@ -1120,10 +1451,47 @@ static const struct bcm2835_dma_cfg bcm2835_data = {
.chan_plat_init = bcm2835_dma_chan_plat_init,
.read_addr = bcm2835_dma_read_addr,
.cs_flags = bcm2835_dma_cs_flags,
+ .dma_abort = bcm2835_abort,
+};
+
+static const struct bcm2835_dma_cfg bcm2711_data = {
+ .addr_offset = BCM2711_DMA40_PHYS_ADDR,
+
+ .cs_reg = BCM2711_DMA40_CS,
+ .cb_reg = BCM2711_DMA40_CB,
+ .next_reg = BCM2711_DMA40_NEXT_CB,
+ .ti_reg = BCM2711_DMA40_TI,
+
+ .wait_mask = BCM2711_DMA40_WAITING_FOR_WRITES,
+ .reset_mask = BCM2711_DMA40_HALT,
+ .int_mask = BCM2711_DMA40_INTEN,
+ .active_mask = BCM2711_DMA40_ACTIVE,
+ .abort_mask = BCM2711_DMA40_ABORT,
+ .s_dreq_mask = BCM2711_DMA40_S_DREQ,
+ .d_dreq_mask = BCM2711_DMA40_D_DREQ,
+
+ .dma_mask = DMA_BIT_MASK(36),
+
+ .cb_get_length = bcm2711_dma_cb_get_length,
+ .cb_get_addr = bcm2711_dma_cb_get_addr,
+ .cb_init = bcm2711_dma_cb_init,
+ .cb_set_src = bcm2711_dma_cb_set_src,
+ .cb_set_dst = bcm2711_dma_cb_set_dst,
+ .cb_set_next = bcm2711_dma_cb_set_next,
+ .cb_set_length = bcm2711_dma_cb_set_length,
+ .cb_append_extra = bcm2711_dma_cb_append_extra,
+
+ .to_cb_addr = bcm2711_dma_to_cb_addr,
+
+ .chan_plat_init = bcm2711_dma_chan_plat_init,
+ .read_addr = bcm2711_dma_read_addr,
+ .cs_flags = bcm2711_dma_cs_flags,
+ .dma_abort = bcm2711_abort,
};
static const struct of_device_id bcm2835_dma_of_match[] = {
{ .compatible = "brcm,bcm2835-dma", .data = &bcm2835_data },
+ { .compatible = "brcm,bcm2711-dma", .data = &bcm2711_data },
{},
};
MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match);
@@ -1147,6 +1515,7 @@ static struct dma_chan *bcm2835_dma_xlate(struct of_phandle_args *spec,
static int bcm2835_dma_probe(struct platform_device *pdev)
{
struct bcm2835_dmadev *od;
+ struct resource *res;
void __iomem *base;
int rc;
int i, j;
@@ -1154,34 +1523,38 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
int irq_flags;
u32 chans_available;
char chan_name[BCM2835_DMA_CHAN_NAME_SIZE];
+ int chan_count, chan_start, chan_end;
- const void *cfg_data = device_get_match_data(&pdev->dev);
- if (!cfg_data) {
- dev_err(&pdev->dev, "Failed to match compatible string\n");
- return -EINVAL;
- }
+ od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
+ if (!od)
+ return -ENOMEM;
- if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ od->cfg = device_get_match_data(&pdev->dev);
+ if (!od->cfg) {
+ dev_err(&pdev->dev, "Failed to match compatible string\n");
+ return -EINVAL;
+ }
- rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ rc = dma_set_mask_and_coherent(&pdev->dev, od->cfg->dma_mask);
if (rc) {
dev_err(&pdev->dev, "Unable to set DMA mask\n");
return rc;
}
- od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
- if (!od)
- return -ENOMEM;
-
dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF);
- base = devm_platform_ioremap_resource(pdev, 0);
+ base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(base))
return PTR_ERR(base);
+ /* The set of channels can be split across multiple instances. */
+ chan_start = ((u32)(uintptr_t)base / BCM2835_DMA_CHAN_SIZE) & 0xf;
+ base -= BCM2835_DMA_CHAN(chan_start);
+ chan_count = resource_size(res) / BCM2835_DMA_CHAN_SIZE;
+ chan_end = min(chan_start + chan_count,
+ BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED + 1);
+
od->base = base;
- od->cfg = cfg_data;
dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
dma_cap_set(DMA_PRIVATE, od->ddev.cap_mask);
@@ -1233,7 +1606,7 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
}
/* get irqs for each channel that we support */
- for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
+ for (i = chan_start; i < chan_end; i++) {
/* skip masked out channels */
if (!(chans_available & (1 << i))) {
irq[i] = -1;
@@ -1256,13 +1629,18 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
irq[i] = platform_get_irq(pdev, i < 11 ? i : 11);
}
+ chan_count = 0;
+
/* get irqs for each channel */
- for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
+ for (i = chan_start; i < chan_end; i++) {
/* skip channels without irq */
if (irq[i] < 0)
continue;
/* check if there are other channels that also use this irq */
+ /* FIXME: This will fail if interrupts are shared across
+ * instances
+ */
irq_flags = 0;
for (j = 0; j <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; j++)
if (i != j && irq[j] == irq[i]) {
@@ -1274,9 +1652,10 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
rc = bcm2835_dma_chan_init(od, i, irq[i], irq_flags);
if (rc)
goto err_no_dma;
+ chan_count++;
}
- dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i);
+ dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", chan_count);
/* Device-tree DMA controller registration */
rc = of_dma_controller_register(pdev->dev.of_node,
BCM2711 has 4 DMA channels with a 40-bit address range, allowing them to access the full 4GB of memory on a Pi 4. Assume every channel is capable of 40-bit address range. Originally-by: Phil Elwell <phil@raspberrypi.org> Originally-by: Maxime Ripard <maxime@cerno.tech> Originally-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Andrea della Porta <andrea.porta@suse.com> --- drivers/dma/bcm2835-dma.c | 553 ++++++++++++++++++++++++++++++++------ 1 file changed, 466 insertions(+), 87 deletions(-)