diff mbox series

[RFC,v2,5/6] dmaengine: Add Synopsys eDMA IP PCIe glue-logic

Message ID 8f7832bd6a32310019d2d01c8a2fa24cd0863d73.1545066805.git.gustavo.pimentel@synopsys.com (mailing list archive)
State RFC
Headers show
Series dmaengine: Add Synopsys eDMA IP driver (version 0) | expand

Commit Message

Gustavo Pimentel Dec. 17, 2018, 5:19 p.m. UTC
Synopsys eDMA IP is normally distributed along with Synopsys PCIe
EndPoint IP (depends of the use and licensing agreement).

This IP requires some basic configurations, such as:
 - eDMA registers BAR
 - eDMA registers offset
 - eDMA linked list BAR
 - eDMA linked list offset
 - eDMA linked list size
 - eDMA version
 - eDMA mode

As a working example, PCIe glue-logic will attach to a Synopsys PCIe
EndPoint IP prototype kit (Vendor ID = 0x16c3, Device ID = 0xedda),
which has built-in an eDMA IP with this default configuration:
 - eDMA registers BAR = 0
 - eDMA registers offset = 0x1000 (4 Kbytes)
 - eDMA linked list BAR = 2
 - eDMA linked list offset = 0x0 (0 Kbytes)
 - eDMA linked list size = 0x20000 (128 Kbytes)
 - eDMA version = 0
 - eDMA mode = EDMA_MODE_UNROLL

This driver can be compile as built-in or external module in kernel.

To enable this driver just select DW_EDMA_PCIE option in kernel
configuration, however it requires and selects automatically DW_EDMA
option too.

Changes:
RFC v1->RFC v2:
 - Replace comments // (C99 style) by /**/
 - Merge two pcim_iomap_regions() calls into just one call
 - Remove pci_try_set_mwi() call
 - Replace some dev_info() by dev_dbg() to reduce *noise*
 - Remove pci_name(pdev) call after being call dw_edma_remove()
 - Remove all power management support
 - Fix the headers of the .c and .h files according to the most recent
   convention
 - Fix errors and checks pointed out by checkpatch with --strict option
 - Replace patch small description tag from dma by dmaengine

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Eugeniy Paltsev <paltsev@synopsys.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Cc: Luis Oliveira <lolivei@synopsys.com>
Cc: Vitor Soares <vitor.soares@synopsys.com>
Cc: Nelson Costa <nelson.costa@synopsys.com>
Cc: Pedro Sousa <pedrom.sousa@synopsys.com>
---
 drivers/dma/dw-edma/Kconfig        |   9 ++
 drivers/dma/dw-edma/Makefile       |   1 +
 drivers/dma/dw-edma/dw-edma-pcie.c | 258 +++++++++++++++++++++++++++++++++++++
 3 files changed, 268 insertions(+)
 create mode 100644 drivers/dma/dw-edma/dw-edma-pcie.c
diff mbox series

Patch

diff --git a/drivers/dma/dw-edma/Kconfig b/drivers/dma/dw-edma/Kconfig
index 3016bed..c0838ce 100644
--- a/drivers/dma/dw-edma/Kconfig
+++ b/drivers/dma/dw-edma/Kconfig
@@ -7,3 +7,12 @@  config DW_EDMA
 	help
 	  Support the Synopsys DesignWare eDMA controller, normally
 	  implemented on endpoints SoCs.
+
+config DW_EDMA_PCIE
+	tristate "Synopsys DesignWare eDMA PCIe driver"
+	depends on PCI && PCI_MSI
+	select DW_EDMA
+	help
+	  Provides a glue-logic between the Synopsys DesignWare
+	  eDMA controller and an endpoint PCIe device. This also serves
+	  as a reference design to whom desires to use this IP.
diff --git a/drivers/dma/dw-edma/Makefile b/drivers/dma/dw-edma/Makefile
index 0c53033..8d45c0d 100644
--- a/drivers/dma/dw-edma/Makefile
+++ b/drivers/dma/dw-edma/Makefile
@@ -4,3 +4,4 @@  obj-$(CONFIG_DW_EDMA)		+= dw-edma.o
 dw-edma-$(CONFIG_DEBUG_FS)	:= dw-edma-v0-debugfs.o
 dw-edma-objs			:= dw-edma-core.o \
 					dw-edma-v0-core.o $(dw-edma-y)
+obj-$(CONFIG_DW_EDMA_PCIE)	+= dw-edma-pcie.o
diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
new file mode 100644
index 0000000..6305768
--- /dev/null
+++ b/drivers/dma/dw-edma/dw-edma-pcie.c
@@ -0,0 +1,258 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
+ * Synopsys DesignWare eDMA PCIe driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+#include <linux/dma/edma.h>
+
+#include "dw-edma-core.h"
+
+enum dw_edma_pcie_bar {
+	BAR_0,
+	BAR_1,
+	BAR_2,
+	BAR_3,
+	BAR_4,
+	BAR_5
+};
+
+struct dw_edma_pcie_data {
+	enum dw_edma_pcie_bar		regs_bar;
+	u64				regs_off;
+	enum dw_edma_pcie_bar		ll_bar;
+	u64				ll_off;
+	size_t				ll_sz;
+	u32				version;
+	enum dw_edma_mode		mode;
+};
+
+static const struct dw_edma_pcie_data snps_edda_data = {
+	/* eDMA registers location */
+	.regs_bar			= BAR_0,
+	.regs_off			= 0x1000,	/*   4 KBytes */
+	/* eDMA memory linked list location */
+	.ll_bar				= BAR_2,
+	.ll_off				= 0,		/*   0 KBytes */
+	.ll_sz				= 0x20000,	/* 128 KBytes */
+	/* Other */
+	.version			= 0,
+	.mode				= EDMA_MODE_UNROLL,
+};
+
+static int dw_edma_pcie_probe(struct pci_dev *pdev,
+			      const struct pci_device_id *pid)
+{
+	const struct dw_edma_pcie_data *pdata = (void *)pid->driver_data;
+	struct device *dev = &pdev->dev;
+	struct dw_edma_chip *chip;
+	struct dw_edma *dw;
+	void __iomem *reg;
+	int err, irq = -1;
+	u32 addr_hi, addr_lo;
+	u16 flags;
+	u8 cap_off;
+
+	if (!pdata) {
+		dev_err(dev, "%s missing data struture\n",
+			pci_name(pdev));
+		return -EFAULT;
+	}
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(dev, "%s enabling device failed\n",
+			pci_name(pdev));
+		return err;
+	}
+
+	err = pcim_iomap_regions(pdev,
+				 BIT(pdata->regs_bar) | BIT(pdata->ll_bar),
+				 pci_name(pdev));
+	if (err) {
+		dev_err(dev, "%s eDMA BAR I/O remapping failed\n",
+			pci_name(pdev));
+		return err;
+	}
+
+	pci_set_master(pdev);
+
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (err) {
+		dev_err(dev, "%s DMA mask set failed\n",
+			pci_name(pdev));
+		return err;
+	}
+
+	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (err) {
+		dev_err(dev, "%s consistent DMA mask set failed\n",
+			pci_name(pdev));
+		return err;
+	}
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	dw = devm_kzalloc(&pdev->dev, sizeof(*dw), GFP_KERNEL);
+	if (!dw)
+		return -ENOMEM;
+
+	irq = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI | PCI_IRQ_MSIX);
+	if (irq < 0) {
+		dev_err(dev, "%s failed to alloc IRQ vector\n",
+			pci_name(pdev));
+		return -EPERM;
+	}
+
+	chip->dw = dw;
+	chip->dev = dev;
+	chip->id = pdev->devfn;
+	chip->irq = pdev->irq;
+
+	dw->regs = pcim_iomap_table(pdev)[pdata->regs_bar];
+	dw->regs += pdata->regs_off;
+
+	dw->va_ll = pcim_iomap_table(pdev)[pdata->ll_bar];
+	dw->va_ll += pdata->ll_off;
+	dw->pa_ll = pdev->resource[pdata->ll_bar].start;
+	dw->pa_ll += pdata->ll_off;
+	dw->ll_sz = pdata->ll_sz;
+
+	dw->msi_addr = 0;
+	dw->msi_data = 0;
+
+	dw->version = pdata->version;
+	dw->mode = pdata->mode;
+
+	dev_dbg(dev, "Version:\t%u\n", dw->version);
+
+	dev_dbg(dev, "Mode:\t%s\n",
+		dw->mode == EDMA_MODE_LEGACY ? "Legacy" : "Unroll");
+
+	dev_dbg(dev, "Registers:\tBAR=%u, off=0x%.16llx B, addr=0x%.8lx\n",
+		pdata->regs_bar, pdata->regs_off,
+		(unsigned long)dw->regs);
+
+	dev_dbg(dev, "L. List:\tBAR=%u, off=0x%.16llx B, sz=0x%.8x B, vaddr=0x%.8lx, paddr=0x%.8lx",
+		pdata->ll_bar, pdata->ll_off, pdata->ll_sz,
+		(unsigned long)dw->va_ll,
+		(unsigned long)dw->pa_ll);
+
+	if (pdev->msi_cap && pdev->msi_enabled) {
+		cap_off = pdev->msi_cap + PCI_MSI_FLAGS;
+		pci_read_config_word(pdev, cap_off, &flags);
+		if (flags & PCI_MSI_FLAGS_ENABLE) {
+			cap_off = pdev->msi_cap + PCI_MSI_ADDRESS_LO;
+			pci_read_config_dword(pdev, cap_off, &addr_lo);
+
+			if (flags & PCI_MSI_FLAGS_64BIT) {
+				cap_off = pdev->msi_cap + PCI_MSI_ADDRESS_HI;
+				pci_read_config_dword(pdev, cap_off, &addr_hi);
+				cap_off = pdev->msi_cap + PCI_MSI_DATA_64;
+			} else {
+				addr_hi = 0;
+				cap_off = pdev->msi_cap + PCI_MSI_DATA_32;
+			}
+
+			dw->msi_addr = addr_hi;
+			dw->msi_addr <<= 32;
+			dw->msi_addr |= addr_lo;
+
+			pci_read_config_dword(pdev, cap_off, &dw->msi_data);
+			dw->msi_data &= 0xffff;
+
+			dev_dbg(dev, "MSI:\t\taddr=0x%.16llx, data=0x%.8x, nr=%d\n",
+				dw->msi_addr, dw->msi_data, pdev->irq);
+		}
+	}
+
+	if (pdev->msix_cap && pdev->msix_enabled) {
+		u32 offset;
+		u8 bir;
+
+		cap_off = pdev->msix_cap + PCI_MSIX_FLAGS;
+		pci_read_config_word(pdev, cap_off, &flags);
+
+		if (flags & PCI_MSIX_FLAGS_ENABLE) {
+			cap_off = pdev->msix_cap + PCI_MSIX_TABLE;
+			pci_read_config_dword(pdev, cap_off, &offset);
+
+			bir = offset & PCI_MSIX_TABLE_BIR;
+			offset &= PCI_MSIX_TABLE_OFFSET;
+
+			reg = pcim_iomap_table(pdev)[bir];
+			reg += offset;
+
+			addr_lo = readl(reg + PCI_MSIX_ENTRY_LOWER_ADDR);
+			addr_hi = readl(reg + PCI_MSIX_ENTRY_UPPER_ADDR);
+			dw->msi_addr = addr_hi;
+			dw->msi_addr <<= 32;
+			dw->msi_addr |= addr_lo;
+
+			dw->msi_data = readl(reg + PCI_MSIX_ENTRY_DATA);
+
+			dev_dbg(dev,
+				"MSI-X:\taddr=0x%.16llx, data=0x%.8x, nr=%d\n",
+				dw->msi_addr, dw->msi_data, pdev->irq);
+		}
+	}
+
+	if (!pdev->msi_enabled && !pdev->msix_enabled) {
+		dev_err(dev, "%s enable interrupt failed\n",
+			pci_name(pdev));
+		return -EPERM;
+	}
+
+	err = dw_edma_probe(chip);
+	if (err) {
+		dev_err(dev, "%s eDMA probe failed\n",
+			pci_name(pdev));
+		return err;
+	}
+
+	pci_set_drvdata(pdev, chip);
+
+	dev_info(dev, "DesignWare eDMA PCIe driver loaded completely\n");
+
+	return 0;
+}
+
+static void dw_edma_pcie_remove(struct pci_dev *pdev)
+{
+	struct dw_edma_chip *chip = pci_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	int err;
+
+	err = dw_edma_remove(chip);
+	if (err)
+		dev_warn(dev, "can't remove device properly: %d\n", err);
+
+	pci_free_irq_vectors(pdev);
+
+	dev_info(dev, "DesignWare eDMA PCIe driver unloaded completely\n");
+}
+
+static const struct pci_device_id dw_edma_pcie_id_table[] = {
+	{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, &snps_edda_data) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, dw_edma_pcie_id_table);
+
+static struct pci_driver dw_edma_pcie_driver = {
+	.name		= "dw-edma-pcie",
+	.id_table	= dw_edma_pcie_id_table,
+	.probe		= dw_edma_pcie_probe,
+	.remove		= dw_edma_pcie_remove,
+};
+
+module_pci_driver(dw_edma_pcie_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Synopsys DesignWare eDMA PCIe driver");
+MODULE_AUTHOR("Gustavo Pimentel <gustavo.pimentel@synopsys.com>");