mbox series

[0/3] Add edac driver for i.MX8MP based on synopsys edac driver

Message ID 1582267156-20189-1-git-send-email-sherry.sun@nxp.com (mailing list archive)
Headers show
Series Add edac driver for i.MX8MP based on synopsys edac driver | expand

Message

Sherry Sun Feb. 21, 2020, 6:39 a.m. UTC
From: Sherry Sun <sherry.sun@nxp.com>

This patchset add edac driver support for i.MX8MP, since i.MX8MP use the same
synopsys memory controller with ZynqMP, so the driver is based on synopsys_edac
driver.

Considering that i.MX8MP dts file is still in kernel/git/shawnguo/linux.git and
isn't in mainline now, I will add EDAC node in i.MX8MP dts after this file is
pushed to mainline. 

And the edac driver for i.MX8MP has been tested in kernel/git/shawnguo/linux.git
where i.MX8MP is supported, it turns out that this driver works well to detect
corrected and uncorrected errors for LPDDR4 in i.MX8MP.

Sherry Sun (3):
  dt-bindings: memory-controllers: Add i.MX8MP DDRC binding doc
  EDAC: Add synopsys edac driver support for i.MX8MP
  EDAC: synopsys: Add edac driver support for i.MX8MP

 .../bindings/memory-controllers/synopsys.txt  |  8 +-
 drivers/edac/Kconfig                          |  2 +-
 drivers/edac/synopsys_edac.c                  | 77 ++++++++++++++++++-
 3 files changed, 83 insertions(+), 4 deletions(-)