diff mbox series

EDAC/mc: Fix use-after-free and memleaks during device removal

Message ID 20191218062129.7400-1-rrichter@marvell.com (mailing list archive)
State New, archived
Headers show
Series EDAC/mc: Fix use-after-free and memleaks during device removal | expand

Commit Message

Robert Richter Dec. 18, 2019, 6:22 a.m. UTC
A test kernel with the options set below revealed several issues when
removing a mci device:

 DEBUG_TEST_DRIVER_REMOVE
 KASAN
 DEBUG_KMEMLEAK

Issues seen:

1) Use-after-free:

On 27.11.19 17:07:33, John Garry wrote:
> [   22.104498] BUG: KASAN: use-after-free in
> edac_remove_sysfs_mci_device+0x148/0x180

The use-after-free is triggered in edac_remove_sysfs_mci_device(). It
became an issue with commit c498afaf7df8 ("EDAC: Introduce an
mci_for_each_dimm() iterator").

The reason for it is that device_unregister(&dimm->dev) not only
removes the sysfs entry, it also frees the dimm struct in
dimm_attr_release(). When incrementing the loop in
mci_for_each_dimm(), the dimm struct is accessed again by the loop
iterator which causes the use-after-free.

In function edac_remove_sysfs_mci_device() all the mci device's
subsequent dimm and csrow objects are removed. When unregistering from
sysfs, instead of removing that data it should be kept until it is
removed together with the mci device. This keeps the data structures
intact and the mci device can be fully used until it will be removed.

2) Memory leaks:

Following memory leaks have been detected:

 # grep edac /sys/kernel/debug/kmemleak | sort | uniq -c
       1     [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0      # mci->csrows
      16     [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0      # csr->channels
      16     [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0      # csr->channels[chn]
       1     [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0      # mci->dimms
      34     [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc()

There are two implementions for device removal in the driver. One is
used before edac_mc_add_mc(), the other afterwards after the device
had been registered in sysfs. The later lacks the removal of some data
allocated in edac_mc_alloc(). All the above issues are fixed as
follows:

Unify release code in a single mci_release() function and use this one
together with put_device() to release the struct mci once there are no
users. Free all subsequent data structures of the children devices in
that release function too. An effect of this is that no data is freed
in edac_mc_sysfs.c (except the "mc" sysfs root node). All sysfs
entries have the mci device as a parent, so its refcount will keep the
struct from being removed as long as sysfs entries exist. Before
freeing struct mci, all sysfs entries are removed now in edac_remove_
sysfs_mci_device(). With the changes made the mci_for_each_dimm() loop
is now save to remove dimm devices from sysfs.

The patch has been tested with the above kernel options, no issues
seen any longer.

This patch should be marked as stable.

Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
---
 drivers/edac/edac_mc.c       |  20 +++----
 drivers/edac/edac_mc_sysfs.c | 100 +++++++++++++----------------------
 drivers/edac/edac_module.h   |   1 -
 3 files changed, 49 insertions(+), 72 deletions(-)

Comments

John Garry Dec. 18, 2019, 11:28 a.m. UTC | #1
On 18/12/2019 06:22, Robert Richter wrote:
> A test kernel with the options set below revealed several issues when
> removing a mci device:
> 
>   DEBUG_TEST_DRIVER_REMOVE
>   KASAN
>   DEBUG_KMEMLEAK
> 
> Issues seen:
> 
> 1) Use-after-free:
> 
> On 27.11.19 17:07:33, John Garry wrote:
>> [   22.104498] BUG: KASAN: use-after-free in
>> edac_remove_sysfs_mci_device+0x148/0x180
> 
> The use-after-free is triggered in edac_remove_sysfs_mci_device(). It
> became an issue with commit c498afaf7df8 ("EDAC: Introduce an
> mci_for_each_dimm() iterator").
> 
> The reason for it is that device_unregister(&dimm->dev) not only
> removes the sysfs entry, it also frees the dimm struct in
> dimm_attr_release(). When incrementing the loop in
> mci_for_each_dimm(), the dimm struct is accessed again by the loop
> iterator which causes the use-after-free.
> 
> In function edac_remove_sysfs_mci_device() all the mci device's
> subsequent dimm and csrow objects are removed. When unregistering from
> sysfs, instead of removing that data it should be kept until it is
> removed together with the mci device. This keeps the data structures
> intact and the mci device can be fully used until it will be removed.
> 
> 2) Memory leaks:
> 
> Following memory leaks have been detected:
> 
>   # grep edac /sys/kernel/debug/kmemleak | sort | uniq -c
>         1     [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0      # mci->csrows
>        16     [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0      # csr->channels
>        16     [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0      # csr->channels[chn]
>         1     [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0      # mci->dimms
>        34     [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc()
> 
> There are two implementions for device removal in the driver. One is
> used before edac_mc_add_mc(), the other afterwards after the device
> had been registered in sysfs. The later lacks the removal of some data
> allocated in edac_mc_alloc(). All the above issues are fixed as
> follows:
> 
> Unify release code in a single mci_release() function and use this one
> together with put_device() to release the struct mci once there are no
> users. Free all subsequent data structures of the children devices in
> that release function too. An effect of this is that no data is freed
> in edac_mc_sysfs.c (except the "mc" sysfs root node). All sysfs
> entries have the mci device as a parent, so its refcount will keep the
> struct from being removed as long as sysfs entries exist. Before
> freeing struct mci, all sysfs entries are removed now in edac_remove_
> sysfs_mci_device(). With the changes made the mci_for_each_dimm() loop
> is now save to remove dimm devices from sysfs.
> 
> The patch has been tested with the above kernel options, no issues
> seen any longer.
> 
> This patch should be marked as stable.

Not sure why you haven't...

> 
> Reported-by: John Garry <john.garry@huawei.com>

The splats and leaks have disappeared for when booting my arm64 machine:
Tested-by: John Garry <john.garry@huawei.com>

thanks
Robert Richter Dec. 18, 2019, 12:55 p.m. UTC | #2
On 18.12.19 11:28:25, John Garry wrote:
> On 18/12/2019 06:22, Robert Richter wrote:

> > The patch has been tested with the above kernel options, no issues
> > seen any longer.
> > 
> > This patch should be marked as stable.
> 
> Not sure why you haven't...

I leave that to the maintainer as he is editing the SOB chain anyway.
The patch would be sent to the stable list already which may cause
confusion.

> 
> > 
> > Reported-by: John Garry <john.garry@huawei.com>
> 
> The splats and leaks have disappeared for when booting my arm64 machine:
> Tested-by: John Garry <john.garry@huawei.com>

Thanks for testing.

-Robert
Borislav Petkov Dec. 18, 2019, 1:05 p.m. UTC | #3
On Wed, Dec 18, 2019 at 12:55:04PM +0000, Robert Richter wrote:
> I leave that to the maintainer as he is editing the SOB chain anyway.
> The patch would be sent to the stable list already which may cause
> confusion.

I haven't looked at it yet but I'd prefer if this patch went the normal
way and landed in stable only eventually so that it gets some testing by
people in linux-next first.

It is not a trivial patch and we did break EDAC with recent rework so
I'd prefer if we take it slowly here and do more extensive testing
before we expose it to the world.

Also, how does this patch play with your cleanup? I'm guessing this
patch goes first and then the cleanup...
Robert Richter Dec. 18, 2019, 1:28 p.m. UTC | #4
On 18.12.19 14:05:10, Borislav Petkov wrote:
> On Wed, Dec 18, 2019 at 12:55:04PM +0000, Robert Richter wrote:
> > I leave that to the maintainer as he is editing the SOB chain anyway.
> > The patch would be sent to the stable list already which may cause
> > confusion.
> 
> I haven't looked at it yet but I'd prefer if this patch went the normal
> way and landed in stable only eventually so that it gets some testing by
> people in linux-next first.
> 
> It is not a trivial patch and we did break EDAC with recent rework so
> I'd prefer if we take it slowly here and do more extensive testing
> before we expose it to the world.

I am fine with taking the time. Once it hits upstream it can be
backported to stable. There is a small conflict with 5.4, so it will
need some manual tweaking anyway.

> 
> Also, how does this patch play with your cleanup? I'm guessing this
> patch goes first and then the cleanup...

Right, the fix will be first. I have already a rebase of the cleanup
series and can send a v3 as soon as this fix is applied to a tree.

-Robert
Borislav Petkov Dec. 22, 2019, 12:15 p.m. UTC | #5
On Wed, Dec 18, 2019 at 06:22:08AM +0000, Robert Richter wrote:
> A test kernel with the options set below revealed several issues when
> removing a mci device:
> 
>  DEBUG_TEST_DRIVER_REMOVE
>  KASAN
>  DEBUG_KMEMLEAK
> 
> Issues seen:
> 
> 1) Use-after-free:
> 
> On 27.11.19 17:07:33, John Garry wrote:
> > [   22.104498] BUG: KASAN: use-after-free in
> > edac_remove_sysfs_mci_device+0x148/0x180
> 
> The use-after-free is triggered in edac_remove_sysfs_mci_device(). It
> became an issue with commit c498afaf7df8 ("EDAC: Introduce an
> mci_for_each_dimm() iterator").

... which means:

Fixes: c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator")

?

> The reason for it is that device_unregister(&dimm->dev) not only
> removes the sysfs entry, it also frees the dimm struct in
> dimm_attr_release(). When incrementing the loop in
> mci_for_each_dimm(), the dimm struct is accessed again by the loop
> iterator which causes the use-after-free.
> 
> In function edac_remove_sysfs_mci_device() all the mci device's
> subsequent dimm and csrow objects are removed. When unregistering from
> sysfs, instead of removing that data it should be kept until it is
> removed together with the mci device. This keeps the data structures
> intact and the mci device can be fully used until it will be removed.
> 
> 2) Memory leaks:
> 
> Following memory leaks have been detected:
> 
>  # grep edac /sys/kernel/debug/kmemleak | sort | uniq -c
>        1     [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0      # mci->csrows
>       16     [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0      # csr->channels
>       16     [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0      # csr->channels[chn]
>        1     [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0      # mci->dimms
>       34     [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc()
> 
> There are two implementions for device removal in the driver.

Which driver? ghes_edac?

> One is
> used before edac_mc_add_mc(), the other afterwards after the device
> had been registered in sysfs. The later lacks the removal of some data
> allocated in edac_mc_alloc(). All the above issues are fixed as
> follows:

This paragraph needs clarification as I have no clue what you mean here.

> 
> Unify release code in a single mci_release() function and use this one

I think you mean s/single/separate/

> together with put_device() to release the struct mci once there are no
> users. Free all subsequent data structures of the children devices in
> that release function too. An effect of this is that no data is freed
> in edac_mc_sysfs.c (except the "mc" sysfs root node). All sysfs
> entries have the mci device as a parent, so its refcount will keep the
> struct from being removed as long as sysfs entries exist. Before
> freeing struct mci, all sysfs entries are removed now in edac_remove_
> sysfs_mci_device(). With the changes made the mci_for_each_dimm() loop
> is now save to remove dimm devices from sysfs.
> 
> The patch has been tested with the above kernel options, no issues
> seen any longer.
> 
> This patch should be marked as stable.
> 
> Reported-by: John Garry <john.garry@huawei.com>
> Signed-off-by: Robert Richter <rrichter@marvell.com>
> ---
>  drivers/edac/edac_mc.c       |  20 +++----
>  drivers/edac/edac_mc_sysfs.c | 100 +++++++++++++----------------------
>  drivers/edac/edac_module.h   |   1 -
>  3 files changed, 49 insertions(+), 72 deletions(-)

Other than that, I don't see anything out of the ordinary with it and it
passes some smoke testing on boxes here so I'll queue v2 and expose it
in linux-next for wider testing...

Thx.
Robert Richter Dec. 22, 2019, 5:22 p.m. UTC | #6
On 22.12.19 13:15:00, Borislav Petkov wrote:
> On Wed, Dec 18, 2019 at 06:22:08AM +0000, Robert Richter wrote:

> > 1) Use-after-free:
> > 
> > On 27.11.19 17:07:33, John Garry wrote:
> > > [   22.104498] BUG: KASAN: use-after-free in
> > > edac_remove_sysfs_mci_device+0x148/0x180
> > 
> > The use-after-free is triggered in edac_remove_sysfs_mci_device(). It
> > became an issue with commit c498afaf7df8 ("EDAC: Introduce an
> > mci_for_each_dimm() iterator").
> 
> ... which means:
> 
> Fixes: c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator")
> 
> ?

Wouldn't say c498afaf7df8 is broken, it is the release code itself.
This patch reveals it. But for patch logistics use the above tag.

-Robert
Aristeu Rozanski Jan. 21, 2020, 6:13 p.m. UTC | #7
On Wed, Dec 18, 2019 at 06:22:08AM +0000, Robert Richter wrote:
> A test kernel with the options set below revealed several issues when
> removing a mci device:
> 
>  DEBUG_TEST_DRIVER_REMOVE
>  KASAN
>  DEBUG_KMEMLEAK
> 
> Issues seen:
> 
> 1) Use-after-free:
> 
> On 27.11.19 17:07:33, John Garry wrote:
> > [   22.104498] BUG: KASAN: use-after-free in
> > edac_remove_sysfs_mci_device+0x148/0x180
> 
> The use-after-free is triggered in edac_remove_sysfs_mci_device(). It
> became an issue with commit c498afaf7df8 ("EDAC: Introduce an
> mci_for_each_dimm() iterator").
> 
> The reason for it is that device_unregister(&dimm->dev) not only
> removes the sysfs entry, it also frees the dimm struct in
> dimm_attr_release(). When incrementing the loop in
> mci_for_each_dimm(), the dimm struct is accessed again by the loop
> iterator which causes the use-after-free.
> 
> In function edac_remove_sysfs_mci_device() all the mci device's
> subsequent dimm and csrow objects are removed. When unregistering from
> sysfs, instead of removing that data it should be kept until it is
> removed together with the mci device. This keeps the data structures
> intact and the mci device can be fully used until it will be removed.
> 
> 2) Memory leaks:
> 
> Following memory leaks have been detected:
> 
>  # grep edac /sys/kernel/debug/kmemleak | sort | uniq -c
>        1     [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0      # mci->csrows
>       16     [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0      # csr->channels
>       16     [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0      # csr->channels[chn]
>        1     [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0      # mci->dimms
>       34     [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc()
> 
> There are two implementions for device removal in the driver. One is
> used before edac_mc_add_mc(), the other afterwards after the device
> had been registered in sysfs. The later lacks the removal of some data
> allocated in edac_mc_alloc(). All the above issues are fixed as
> follows:
> 
> Unify release code in a single mci_release() function and use this one
> together with put_device() to release the struct mci once there are no
> users. Free all subsequent data structures of the children devices in
> that release function too. An effect of this is that no data is freed
> in edac_mc_sysfs.c (except the "mc" sysfs root node). All sysfs
> entries have the mci device as a parent, so its refcount will keep the
> struct from being removed as long as sysfs entries exist. Before
> freeing struct mci, all sysfs entries are removed now in edac_remove_
> sysfs_mci_device(). With the changes made the mci_for_each_dimm() loop
> is now save to remove dimm devices from sysfs.
> 
> The patch has been tested with the above kernel options, no issues
> seen any longer.
> 
> This patch should be marked as stable.
> 
> Reported-by: John Garry <john.garry@huawei.com>
> Signed-off-by: Robert Richter <rrichter@marvell.com>
> ---
>  drivers/edac/edac_mc.c       |  20 +++----
>  drivers/edac/edac_mc_sysfs.c | 100 +++++++++++++----------------------
>  drivers/edac/edac_module.h   |   1 -
>  3 files changed, 49 insertions(+), 72 deletions(-)
> 
> diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
> index 7243b88f81d8..058efcd9032e 100644
> --- a/drivers/edac/edac_mc.c
> +++ b/drivers/edac/edac_mc.c
> @@ -278,6 +278,12 @@ void *edac_align_ptr(void **p, unsigned int size, int n_elems)
>  
>  static void _edac_mc_free(struct mem_ctl_info *mci)
>  {
> +	put_device(&mci->dev);
> +}
> +
> +static void mci_release(struct device *dev)
> +{
> +	struct mem_ctl_info *mci = container_of(dev, struct mem_ctl_info, dev);
>  	struct csrow_info *csr;
>  	int i, chn, row;
>  
> @@ -371,6 +377,9 @@ struct mem_ctl_info *edac_mc_alloc(unsigned int mc_num,
>  	if (mci == NULL)
>  		return NULL;
>  
> +	mci->dev.release = mci_release;
> +	device_initialize(&mci->dev);
> +
>  	/* Adjust pointers so they point within the memory we just allocated
>  	 * rather than an imaginary chunk of memory located at address 0.
>  	 */
> @@ -505,16 +514,9 @@ void edac_mc_free(struct mem_ctl_info *mci)
>  {
>  	edac_dbg(1, "\n");
>  
> -	/* If we're not yet registered with sysfs free only what was allocated
> -	 * in edac_mc_alloc().
> -	 */
> -	if (!device_is_registered(&mci->dev)) {
> -		_edac_mc_free(mci);
> -		return;
> -	}
> +	edac_remove_sysfs_mci_device(mci);
>  
> -	/* the mci instance is freed here, when the sysfs object is dropped */
> -	edac_unregister_sysfs(mci);
> +	_edac_mc_free(mci);
>  }
>  EXPORT_SYMBOL_GPL(edac_mc_free);
>  
> diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
> index 0367554e7437..408bace699dc 100644
> --- a/drivers/edac/edac_mc_sysfs.c
> +++ b/drivers/edac/edac_mc_sysfs.c
> @@ -274,17 +274,8 @@ static const struct attribute_group *csrow_attr_groups[] = {
>  	NULL
>  };
>  
> -static void csrow_attr_release(struct device *dev)
> -{
> -	struct csrow_info *csrow = container_of(dev, struct csrow_info, dev);
> -
> -	edac_dbg(1, "device %s released\n", dev_name(dev));
> -	kfree(csrow);
> -}
> -
>  static const struct device_type csrow_attr_type = {
>  	.groups		= csrow_attr_groups,
> -	.release	= csrow_attr_release,
>  };
>  
>  /*
> @@ -390,6 +381,14 @@ static const struct attribute_group *csrow_dev_groups[] = {
>  	NULL
>  };
>  
> +static void csrow_release(struct device *dev)
> +{
> +	/*
> +	 * Nothing to do. We just unregister sysfs here. The mci
> +	 * device owns the data and will also release it.
> +	 */
> +}
> +
>  static inline int nr_pages_per_csrow(struct csrow_info *csrow)
>  {
>  	int chan, nr_pages = 0;
> @@ -408,6 +407,7 @@ static int edac_create_csrow_object(struct mem_ctl_info *mci,
>  
>  	csrow->dev.type = &csrow_attr_type;
>  	csrow->dev.groups = csrow_dev_groups;
> +	csrow->dev.release = csrow_release;
>  	device_initialize(&csrow->dev);
>  	csrow->dev.parent = &mci->dev;
>  	csrow->mci = mci;
> @@ -444,11 +444,8 @@ static int edac_create_csrow_objects(struct mem_ctl_info *mci)
>  
>  error:
>  	for (--i; i >= 0; i--) {
> -		csrow = mci->csrows[i];
> -		if (!nr_pages_per_csrow(csrow))
> -			continue;
> -
> -		device_del(&mci->csrows[i]->dev);
> +		if (device_is_registered(&mci->csrows[i]->dev))
> +			device_unregister(&mci->csrows[i]->dev);
>  	}
>  
>  	return err;
> @@ -457,15 +454,13 @@ static int edac_create_csrow_objects(struct mem_ctl_info *mci)
>  static void edac_delete_csrow_objects(struct mem_ctl_info *mci)
>  {
>  	int i;
> -	struct csrow_info *csrow;
>  
> -	for (i = mci->nr_csrows - 1; i >= 0; i--) {
> -		csrow = mci->csrows[i];
> -		if (!nr_pages_per_csrow(csrow))
> -			continue;
> -		device_unregister(&mci->csrows[i]->dev);
> +	for (i = 0; i < mci->nr_csrows; i++) {
> +		if (device_is_registered(&mci->csrows[i]->dev))
> +			device_unregister(&mci->csrows[i]->dev);
>  	}
>  }
> +
>  #endif
>  
>  /*
> @@ -606,19 +601,18 @@ static const struct attribute_group *dimm_attr_groups[] = {
>  	NULL
>  };
>  
> -static void dimm_attr_release(struct device *dev)
> -{
> -	struct dimm_info *dimm = container_of(dev, struct dimm_info, dev);
> -
> -	edac_dbg(1, "device %s released\n", dev_name(dev));
> -	kfree(dimm);
> -}
> -
>  static const struct device_type dimm_attr_type = {
>  	.groups		= dimm_attr_groups,
> -	.release	= dimm_attr_release,
>  };
>  
> +static void dimm_release(struct device *dev)
> +{
> +	/*
> +	 * Nothing to do. We just unregister sysfs here. The mci
> +	 * device owns the data and will also release it.
> +	 */
> +}
> +
>  /* Create a DIMM object under specifed memory controller device */
>  static int edac_create_dimm_object(struct mem_ctl_info *mci,
>  				   struct dimm_info *dimm)
> @@ -627,6 +621,7 @@ static int edac_create_dimm_object(struct mem_ctl_info *mci,
>  	dimm->mci = mci;
>  
>  	dimm->dev.type = &dimm_attr_type;
> +	dimm->dev.release = dimm_release;
>  	device_initialize(&dimm->dev);
>  
>  	dimm->dev.parent = &mci->dev;
> @@ -891,17 +886,8 @@ static const struct attribute_group *mci_attr_groups[] = {
>  	NULL
>  };
>  
> -static void mci_attr_release(struct device *dev)
> -{
> -	struct mem_ctl_info *mci = container_of(dev, struct mem_ctl_info, dev);
> -
> -	edac_dbg(1, "device %s released\n", dev_name(dev));
> -	kfree(mci);
> -}
> -
>  static const struct device_type mci_attr_type = {
>  	.groups		= mci_attr_groups,
> -	.release	= mci_attr_release,
>  };
>  
>  /*
> @@ -920,8 +906,6 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
>  
>  	/* get the /sys/devices/system/edac subsys reference */
>  	mci->dev.type = &mci_attr_type;
> -	device_initialize(&mci->dev);
> -
>  	mci->dev.parent = mci_pdev;
>  	mci->dev.groups = groups;
>  	dev_set_name(&mci->dev, "mc%d", mci->mc_idx);
> @@ -931,7 +915,7 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
>  	err = device_add(&mci->dev);
>  	if (err < 0) {
>  		edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev));
> -		put_device(&mci->dev);
> +		/* no put_device() here, free mci with _edac_mc_free() */
>  		return err;
>  	}
>  
> @@ -947,24 +931,20 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
>  
>  		err = edac_create_dimm_object(mci, dimm);
>  		if (err)
> -			goto fail_unregister_dimm;
> +			goto fail;
>  	}
>  
>  #ifdef CONFIG_EDAC_LEGACY_SYSFS
>  	err = edac_create_csrow_objects(mci);
>  	if (err < 0)
> -		goto fail_unregister_dimm;
> +		goto fail;
>  #endif
>  
>  	edac_create_debugfs_nodes(mci);
>  	return 0;
>  
> -fail_unregister_dimm:
> -	mci_for_each_dimm(mci, dimm) {
> -		if (device_is_registered(&dimm->dev))
> -			device_unregister(&dimm->dev);
> -	}
> -	device_unregister(&mci->dev);
> +fail:
> +	edac_remove_sysfs_mci_device(mci);
>  
>  	return err;
>  }
> @@ -976,6 +956,9 @@ void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
>  {
>  	struct dimm_info *dimm;
>  
> +	if (!device_is_registered(&mci->dev))
> +		return;
> +
>  	edac_dbg(0, "\n");
>  
>  #ifdef CONFIG_EDAC_DEBUG
> @@ -986,17 +969,14 @@ void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
>  #endif
>  
>  	mci_for_each_dimm(mci, dimm) {
> -		if (dimm->nr_pages == 0)
> +		if (!device_is_registered(&dimm->dev))
>  			continue;
>  		edac_dbg(1, "unregistering device %s\n", dev_name(&dimm->dev));
>  		device_unregister(&dimm->dev);
>  	}
> -}
>  
> -void edac_unregister_sysfs(struct mem_ctl_info *mci)
> -{
> -	edac_dbg(1, "unregistering device %s\n", dev_name(&mci->dev));
> -	device_unregister(&mci->dev);
> +	/* only remove the device, but keep mci */
> +	device_del(&mci->dev);
>  }
>  
>  static void mc_attr_release(struct device *dev)
> @@ -1010,9 +990,6 @@ static void mc_attr_release(struct device *dev)
>  	kfree(dev);
>  }
>  
> -static const struct device_type mc_attr_type = {
> -	.release	= mc_attr_release,
> -};
>  /*
>   * Init/exit code for the module. Basically, creates/removes /sys/class/rc
>   */
> @@ -1025,11 +1002,10 @@ int __init edac_mc_sysfs_init(void)
>  		return -ENOMEM;
>  
>  	mci_pdev->bus = edac_get_sysfs_subsys();
> -	mci_pdev->type = &mc_attr_type;
> -	device_initialize(mci_pdev);
> -	dev_set_name(mci_pdev, "mc");
> +	mci_pdev->release = mc_attr_release;
> +	mci_pdev->init_name = "mc";
>  
> -	err = device_add(mci_pdev);
> +	err = device_register(mci_pdev);
>  	if (err < 0) {
>  		edac_dbg(1, "failure: create device %s\n", dev_name(mci_pdev));
>  		put_device(mci_pdev);
> diff --git a/drivers/edac/edac_module.h b/drivers/edac/edac_module.h
> index 388427d378b1..aa1f91688eb8 100644
> --- a/drivers/edac/edac_module.h
> +++ b/drivers/edac/edac_module.h
> @@ -28,7 +28,6 @@ void edac_mc_sysfs_exit(void);
>  extern int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
>  					const struct attribute_group **groups);
>  extern void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci);
> -void edac_unregister_sysfs(struct mem_ctl_info *mci);
>  extern int edac_get_log_ue(void);
>  extern int edac_get_log_ce(void);
>  extern int edac_get_panic_on_ue(void);

Acked-by: Aristeu Rozanski <aris@redhat.com>
diff mbox series

Patch

diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 7243b88f81d8..058efcd9032e 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -278,6 +278,12 @@  void *edac_align_ptr(void **p, unsigned int size, int n_elems)
 
 static void _edac_mc_free(struct mem_ctl_info *mci)
 {
+	put_device(&mci->dev);
+}
+
+static void mci_release(struct device *dev)
+{
+	struct mem_ctl_info *mci = container_of(dev, struct mem_ctl_info, dev);
 	struct csrow_info *csr;
 	int i, chn, row;
 
@@ -371,6 +377,9 @@  struct mem_ctl_info *edac_mc_alloc(unsigned int mc_num,
 	if (mci == NULL)
 		return NULL;
 
+	mci->dev.release = mci_release;
+	device_initialize(&mci->dev);
+
 	/* Adjust pointers so they point within the memory we just allocated
 	 * rather than an imaginary chunk of memory located at address 0.
 	 */
@@ -505,16 +514,9 @@  void edac_mc_free(struct mem_ctl_info *mci)
 {
 	edac_dbg(1, "\n");
 
-	/* If we're not yet registered with sysfs free only what was allocated
-	 * in edac_mc_alloc().
-	 */
-	if (!device_is_registered(&mci->dev)) {
-		_edac_mc_free(mci);
-		return;
-	}
+	edac_remove_sysfs_mci_device(mci);
 
-	/* the mci instance is freed here, when the sysfs object is dropped */
-	edac_unregister_sysfs(mci);
+	_edac_mc_free(mci);
 }
 EXPORT_SYMBOL_GPL(edac_mc_free);
 
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 0367554e7437..408bace699dc 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -274,17 +274,8 @@  static const struct attribute_group *csrow_attr_groups[] = {
 	NULL
 };
 
-static void csrow_attr_release(struct device *dev)
-{
-	struct csrow_info *csrow = container_of(dev, struct csrow_info, dev);
-
-	edac_dbg(1, "device %s released\n", dev_name(dev));
-	kfree(csrow);
-}
-
 static const struct device_type csrow_attr_type = {
 	.groups		= csrow_attr_groups,
-	.release	= csrow_attr_release,
 };
 
 /*
@@ -390,6 +381,14 @@  static const struct attribute_group *csrow_dev_groups[] = {
 	NULL
 };
 
+static void csrow_release(struct device *dev)
+{
+	/*
+	 * Nothing to do. We just unregister sysfs here. The mci
+	 * device owns the data and will also release it.
+	 */
+}
+
 static inline int nr_pages_per_csrow(struct csrow_info *csrow)
 {
 	int chan, nr_pages = 0;
@@ -408,6 +407,7 @@  static int edac_create_csrow_object(struct mem_ctl_info *mci,
 
 	csrow->dev.type = &csrow_attr_type;
 	csrow->dev.groups = csrow_dev_groups;
+	csrow->dev.release = csrow_release;
 	device_initialize(&csrow->dev);
 	csrow->dev.parent = &mci->dev;
 	csrow->mci = mci;
@@ -444,11 +444,8 @@  static int edac_create_csrow_objects(struct mem_ctl_info *mci)
 
 error:
 	for (--i; i >= 0; i--) {
-		csrow = mci->csrows[i];
-		if (!nr_pages_per_csrow(csrow))
-			continue;
-
-		device_del(&mci->csrows[i]->dev);
+		if (device_is_registered(&mci->csrows[i]->dev))
+			device_unregister(&mci->csrows[i]->dev);
 	}
 
 	return err;
@@ -457,15 +454,13 @@  static int edac_create_csrow_objects(struct mem_ctl_info *mci)
 static void edac_delete_csrow_objects(struct mem_ctl_info *mci)
 {
 	int i;
-	struct csrow_info *csrow;
 
-	for (i = mci->nr_csrows - 1; i >= 0; i--) {
-		csrow = mci->csrows[i];
-		if (!nr_pages_per_csrow(csrow))
-			continue;
-		device_unregister(&mci->csrows[i]->dev);
+	for (i = 0; i < mci->nr_csrows; i++) {
+		if (device_is_registered(&mci->csrows[i]->dev))
+			device_unregister(&mci->csrows[i]->dev);
 	}
 }
+
 #endif
 
 /*
@@ -606,19 +601,18 @@  static const struct attribute_group *dimm_attr_groups[] = {
 	NULL
 };
 
-static void dimm_attr_release(struct device *dev)
-{
-	struct dimm_info *dimm = container_of(dev, struct dimm_info, dev);
-
-	edac_dbg(1, "device %s released\n", dev_name(dev));
-	kfree(dimm);
-}
-
 static const struct device_type dimm_attr_type = {
 	.groups		= dimm_attr_groups,
-	.release	= dimm_attr_release,
 };
 
+static void dimm_release(struct device *dev)
+{
+	/*
+	 * Nothing to do. We just unregister sysfs here. The mci
+	 * device owns the data and will also release it.
+	 */
+}
+
 /* Create a DIMM object under specifed memory controller device */
 static int edac_create_dimm_object(struct mem_ctl_info *mci,
 				   struct dimm_info *dimm)
@@ -627,6 +621,7 @@  static int edac_create_dimm_object(struct mem_ctl_info *mci,
 	dimm->mci = mci;
 
 	dimm->dev.type = &dimm_attr_type;
+	dimm->dev.release = dimm_release;
 	device_initialize(&dimm->dev);
 
 	dimm->dev.parent = &mci->dev;
@@ -891,17 +886,8 @@  static const struct attribute_group *mci_attr_groups[] = {
 	NULL
 };
 
-static void mci_attr_release(struct device *dev)
-{
-	struct mem_ctl_info *mci = container_of(dev, struct mem_ctl_info, dev);
-
-	edac_dbg(1, "device %s released\n", dev_name(dev));
-	kfree(mci);
-}
-
 static const struct device_type mci_attr_type = {
 	.groups		= mci_attr_groups,
-	.release	= mci_attr_release,
 };
 
 /*
@@ -920,8 +906,6 @@  int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
 
 	/* get the /sys/devices/system/edac subsys reference */
 	mci->dev.type = &mci_attr_type;
-	device_initialize(&mci->dev);
-
 	mci->dev.parent = mci_pdev;
 	mci->dev.groups = groups;
 	dev_set_name(&mci->dev, "mc%d", mci->mc_idx);
@@ -931,7 +915,7 @@  int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
 	err = device_add(&mci->dev);
 	if (err < 0) {
 		edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev));
-		put_device(&mci->dev);
+		/* no put_device() here, free mci with _edac_mc_free() */
 		return err;
 	}
 
@@ -947,24 +931,20 @@  int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
 
 		err = edac_create_dimm_object(mci, dimm);
 		if (err)
-			goto fail_unregister_dimm;
+			goto fail;
 	}
 
 #ifdef CONFIG_EDAC_LEGACY_SYSFS
 	err = edac_create_csrow_objects(mci);
 	if (err < 0)
-		goto fail_unregister_dimm;
+		goto fail;
 #endif
 
 	edac_create_debugfs_nodes(mci);
 	return 0;
 
-fail_unregister_dimm:
-	mci_for_each_dimm(mci, dimm) {
-		if (device_is_registered(&dimm->dev))
-			device_unregister(&dimm->dev);
-	}
-	device_unregister(&mci->dev);
+fail:
+	edac_remove_sysfs_mci_device(mci);
 
 	return err;
 }
@@ -976,6 +956,9 @@  void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
 {
 	struct dimm_info *dimm;
 
+	if (!device_is_registered(&mci->dev))
+		return;
+
 	edac_dbg(0, "\n");
 
 #ifdef CONFIG_EDAC_DEBUG
@@ -986,17 +969,14 @@  void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
 #endif
 
 	mci_for_each_dimm(mci, dimm) {
-		if (dimm->nr_pages == 0)
+		if (!device_is_registered(&dimm->dev))
 			continue;
 		edac_dbg(1, "unregistering device %s\n", dev_name(&dimm->dev));
 		device_unregister(&dimm->dev);
 	}
-}
 
-void edac_unregister_sysfs(struct mem_ctl_info *mci)
-{
-	edac_dbg(1, "unregistering device %s\n", dev_name(&mci->dev));
-	device_unregister(&mci->dev);
+	/* only remove the device, but keep mci */
+	device_del(&mci->dev);
 }
 
 static void mc_attr_release(struct device *dev)
@@ -1010,9 +990,6 @@  static void mc_attr_release(struct device *dev)
 	kfree(dev);
 }
 
-static const struct device_type mc_attr_type = {
-	.release	= mc_attr_release,
-};
 /*
  * Init/exit code for the module. Basically, creates/removes /sys/class/rc
  */
@@ -1025,11 +1002,10 @@  int __init edac_mc_sysfs_init(void)
 		return -ENOMEM;
 
 	mci_pdev->bus = edac_get_sysfs_subsys();
-	mci_pdev->type = &mc_attr_type;
-	device_initialize(mci_pdev);
-	dev_set_name(mci_pdev, "mc");
+	mci_pdev->release = mc_attr_release;
+	mci_pdev->init_name = "mc";
 
-	err = device_add(mci_pdev);
+	err = device_register(mci_pdev);
 	if (err < 0) {
 		edac_dbg(1, "failure: create device %s\n", dev_name(mci_pdev));
 		put_device(mci_pdev);
diff --git a/drivers/edac/edac_module.h b/drivers/edac/edac_module.h
index 388427d378b1..aa1f91688eb8 100644
--- a/drivers/edac/edac_module.h
+++ b/drivers/edac/edac_module.h
@@ -28,7 +28,6 @@  void edac_mc_sysfs_exit(void);
 extern int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
 					const struct attribute_group **groups);
 extern void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci);
-void edac_unregister_sysfs(struct mem_ctl_info *mci);
 extern int edac_get_log_ue(void);
 extern int edac_get_log_ce(void);
 extern int edac_get_panic_on_ue(void);