From patchwork Tue Feb 18 17:13:12 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rob Herring (Arm)" X-Patchwork-Id: 11389107 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 59FAD92A for ; Tue, 18 Feb 2020 17:14:50 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 209EE2465D for ; Tue, 18 Feb 2020 17:14:50 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1582046090; bh=p5RYf9TBAgA92fDTAf+vaHyC7OQz7krvXxB4AQnSM+0=; h=From:To:Cc:Subject:Date:In-Reply-To:References:List-ID:From; b=YtxHpxH6zc5uubLmpAyi5HeCbz6zuzeCzdbAzm84IDiHJgKo2UOkmqKNhXQD8MQIZ VYNLTHR0I1CWGLcQypvcDnRi+hUQR9IfZ0vYVgnj71/jbpEMNm1ieo77izo/LEX76z eIwVil0VesNPv7k1mKlVP/IgeQnRAG6OWzDHoc54= Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726801AbgBRRN3 (ORCPT ); Tue, 18 Feb 2020 12:13:29 -0500 Received: from mail-ot1-f65.google.com ([209.85.210.65]:38483 "EHLO mail-ot1-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726963AbgBRRN3 (ORCPT ); Tue, 18 Feb 2020 12:13:29 -0500 Received: by mail-ot1-f65.google.com with SMTP id z9so20243638oth.5; Tue, 18 Feb 2020 09:13:27 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=VtNQPtbipsuMwKFOkITQFTxijny53xSg+1st3kaRJ70=; b=ld111lcikpM2/46lkAWhNuMOypwNEWRO9oepV/zS9j10iMou6sLI7VoTpyo2vZMP4a wXXET0/ajGJWumK+bB+65ot3S3QMu9Sb/szRCmcV0gpdzVz9/mkN1umV+34hVxEcBMNm cEWlleBBNyvhqPOftRY2AHhPhhSFwV37pDVsfkwKhjmPzDS77EET61U0hnuwUilY0e/X fKV7FB900uAGtm1bx1pAfQfCK7A0U7m+f4Rtc+hryJonT2rPxmSUTEhlBxqyJY6JI+39 2lfwO1bfdl1Q4c8NPEKN/Wp8sOZevQO4USZKOAmBqkQp2D8wQNELx/lkVU+FSdzjjMc/ 17ZA== X-Gm-Message-State: APjAAAWoJQDy6MjiyVhjdbrYWnPt6WrylxhRx92nnYdWDniTrNTdPGU2 FDDEqZkajI0ft1S+Y+zYyg== X-Google-Smtp-Source: APXvYqxIgJEiGcrP9a/AzGpB/TQJQKJ5OUIjHj/qcJRzDQIshhUxZWM3aByoxTrV9DaB6xNB+e2CaA== X-Received: by 2002:a05:6830:2111:: with SMTP id i17mr15604572otc.24.1582046007043; Tue, 18 Feb 2020 09:13:27 -0800 (PST) Received: from xps15.herring.priv (24-155-109-49.dyn.grandenetworks.net. [24.155.109.49]) by smtp.googlemail.com with ESMTPSA id y25sm1545755oto.27.2020.02.18.09.13.25 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 Feb 2020 09:13:26 -0800 (PST) From: Rob Herring To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, soc@kernel.org, Andre Przywara , Robert Richter , Jon Loeliger , Alexander Graf , Matthias Brugger , Mark Langsdorf Cc: Alex Williamson , Borislav Petkov , Cornelia Huck , Daniel Lezcano , "David S. Miller" , devicetree@vger.kernel.org, Eric Auger , iommu@lists.linux-foundation.org, James Morse , Jens Axboe , Joerg Roedel , kvm@vger.kernel.org, linux-clk@vger.kernel.org, linux-edac@vger.kernel.org, linux-ide@vger.kernel.org, linux-pm@vger.kernel.org, Mauro Carvalho Chehab , netdev@vger.kernel.org, "Rafael J. Wysocki" , Robin Murphy , Stephen Boyd , Tony Luck , Viresh Kumar , Will Deacon Subject: [RFC PATCH 02/11] ata: Remove Calxeda AHCI driver Date: Tue, 18 Feb 2020 11:13:12 -0600 Message-Id: <20200218171321.30990-3-robh@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200218171321.30990-1-robh@kernel.org> References: <20200218171321.30990-1-robh@kernel.org> MIME-Version: 1.0 Sender: linux-edac-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-edac@vger.kernel.org Cc: Jens Axboe Cc: linux-ide@vger.kernel.org Signed-off-by: Rob Herring Acked-by: Mark Langsdorf --- Do not apply yet. drivers/ata/Kconfig | 9 - drivers/ata/Makefile | 1 - drivers/ata/sata_highbank.c | 635 ------------------------------------ 3 files changed, 645 deletions(-) delete mode 100644 drivers/ata/sata_highbank.c -- 2.20.1 diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index a6beb2c5a692..687ddd9f4188 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -395,15 +395,6 @@ config SATA_DWC_VDEBUG help This option enables the taskfile dumping and NCQ debugging. -config SATA_HIGHBANK - tristate "Calxeda Highbank SATA support" - depends on ARCH_HIGHBANK || COMPILE_TEST - help - This option enables support for the Calxeda Highbank SoC's - onboard SATA. - - If unsure, say N. - config SATA_MV tristate "Marvell SATA support" depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index d8cc2e04a6c7..08f26d674ed7 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_SATA_GEMINI) += sata_gemini.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o -obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o obj-$(CONFIG_AHCI_BRCM) += ahci_brcm.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c deleted file mode 100644 index ad3893c62572..000000000000 --- a/drivers/ata/sata_highbank.c +++ /dev/null @@ -1,635 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Calxeda Highbank AHCI SATA platform driver - * Copyright 2012 Calxeda, Inc. - * - * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "ahci.h" - -#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f)) -#define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2) -#define SERDES_CR_CTL 0x80a0 -#define SERDES_CR_ADDR 0x80a1 -#define SERDES_CR_DATA 0x80a2 -#define CR_BUSY 0x0001 -#define CR_START 0x0001 -#define CR_WR_RDN 0x0002 -#define CPHY_TX_INPUT_STS 0x2001 -#define CPHY_RX_INPUT_STS 0x2002 -#define CPHY_SATA_TX_OVERRIDE 0x8000 -#define CPHY_SATA_RX_OVERRIDE 0x4000 -#define CPHY_TX_OVERRIDE 0x2004 -#define CPHY_RX_OVERRIDE 0x2005 -#define SPHY_LANE 0x100 -#define SPHY_HALF_RATE 0x0001 -#define CPHY_SATA_DPLL_MODE 0x0700 -#define CPHY_SATA_DPLL_SHIFT 8 -#define CPHY_SATA_DPLL_RESET (1 << 11) -#define CPHY_SATA_TX_ATTEN 0x1c00 -#define CPHY_SATA_TX_ATTEN_SHIFT 10 -#define CPHY_PHY_COUNT 6 -#define CPHY_LANE_COUNT 4 -#define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT) - -static DEFINE_SPINLOCK(cphy_lock); -/* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based - * sata ports to their phys and then to their lanes within the phys - */ -struct phy_lane_info { - void __iomem *phy_base; - u8 lane_mapping; - u8 phy_devs; - u8 tx_atten; -}; -static struct phy_lane_info port_data[CPHY_PORT_COUNT]; - -static DEFINE_SPINLOCK(sgpio_lock); -#define SCLOCK 0 -#define SLOAD 1 -#define SDATA 2 -#define SGPIO_PINS 3 -#define SGPIO_PORTS 8 - -struct ecx_plat_data { - u32 n_ports; - /* number of extra clocks that the SGPIO PIC controller expects */ - u32 pre_clocks; - u32 post_clocks; - struct gpio_desc *sgpio_gpiod[SGPIO_PINS]; - u32 sgpio_pattern; - u32 port_to_sgpio[SGPIO_PORTS]; -}; - -#define SGPIO_SIGNALS 3 -#define ECX_ACTIVITY_BITS 0x300000 -#define ECX_ACTIVITY_SHIFT 0 -#define ECX_LOCATE_BITS 0x80000 -#define ECX_LOCATE_SHIFT 1 -#define ECX_FAULT_BITS 0x400000 -#define ECX_FAULT_SHIFT 2 -static inline int sgpio_bit_shift(struct ecx_plat_data *pdata, u32 port, - u32 shift) -{ - return 1 << (3 * pdata->port_to_sgpio[port] + shift); -} - -static void ecx_parse_sgpio(struct ecx_plat_data *pdata, u32 port, u32 state) -{ - if (state & ECX_ACTIVITY_BITS) - pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port, - ECX_ACTIVITY_SHIFT); - else - pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port, - ECX_ACTIVITY_SHIFT); - if (state & ECX_LOCATE_BITS) - pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port, - ECX_LOCATE_SHIFT); - else - pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port, - ECX_LOCATE_SHIFT); - if (state & ECX_FAULT_BITS) - pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port, - ECX_FAULT_SHIFT); - else - pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port, - ECX_FAULT_SHIFT); -} - -/* - * Tell the LED controller that the signal has changed by raising the clock - * line for 50 uS and then lowering it for 50 uS. - */ -static void ecx_led_cycle_clock(struct ecx_plat_data *pdata) -{ - gpiod_set_value(pdata->sgpio_gpiod[SCLOCK], 1); - udelay(50); - gpiod_set_value(pdata->sgpio_gpiod[SCLOCK], 0); - udelay(50); -} - -static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state, - ssize_t size) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - struct ecx_plat_data *pdata = hpriv->plat_data; - struct ahci_port_priv *pp = ap->private_data; - unsigned long flags; - int pmp, i; - struct ahci_em_priv *emp; - u32 sgpio_out; - - /* get the slot number from the message */ - pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < EM_MAX_SLOTS) - emp = &pp->em_priv[pmp]; - else - return -EINVAL; - - if (!(hpriv->em_msg_type & EM_MSG_TYPE_LED)) - return size; - - spin_lock_irqsave(&sgpio_lock, flags); - ecx_parse_sgpio(pdata, ap->port_no, state); - sgpio_out = pdata->sgpio_pattern; - for (i = 0; i < pdata->pre_clocks; i++) - ecx_led_cycle_clock(pdata); - - gpiod_set_value(pdata->sgpio_gpiod[SLOAD], 1); - ecx_led_cycle_clock(pdata); - gpiod_set_value(pdata->sgpio_gpiod[SLOAD], 0); - /* - * bit-bang out the SGPIO pattern, by consuming a bit and then - * clocking it out. - */ - for (i = 0; i < (SGPIO_SIGNALS * pdata->n_ports); i++) { - gpiod_set_value(pdata->sgpio_gpiod[SDATA], sgpio_out & 1); - sgpio_out >>= 1; - ecx_led_cycle_clock(pdata); - } - for (i = 0; i < pdata->post_clocks; i++) - ecx_led_cycle_clock(pdata); - - /* save off new led state for port/slot */ - emp->led_state = state; - - spin_unlock_irqrestore(&sgpio_lock, flags); - return size; -} - -static void highbank_set_em_messages(struct device *dev, - struct ahci_host_priv *hpriv, - struct ata_port_info *pi) -{ - struct device_node *np = dev->of_node; - struct ecx_plat_data *pdata = hpriv->plat_data; - int i; - - for (i = 0; i < SGPIO_PINS; i++) { - struct gpio_desc *gpiod; - - gpiod = devm_gpiod_get_index(dev, "calxeda,sgpio", i, - GPIOD_OUT_HIGH); - if (IS_ERR(gpiod)) { - dev_err(dev, "failed to get GPIO %d\n", i); - continue; - } - gpiod_set_consumer_name(gpiod, "CX SGPIO"); - - pdata->sgpio_gpiod[i] = gpiod; - } - of_property_read_u32_array(np, "calxeda,led-order", - pdata->port_to_sgpio, - pdata->n_ports); - if (of_property_read_u32(np, "calxeda,pre-clocks", &pdata->pre_clocks)) - pdata->pre_clocks = 0; - if (of_property_read_u32(np, "calxeda,post-clocks", - &pdata->post_clocks)) - pdata->post_clocks = 0; - - /* store em_loc */ - hpriv->em_loc = 0; - hpriv->em_buf_sz = 4; - hpriv->em_msg_type = EM_MSG_TYPE_LED; - pi->flags |= ATA_FLAG_EM | ATA_FLAG_SW_ACTIVITY; -} - -static u32 __combo_phy_reg_read(u8 sata_port, u32 addr) -{ - u32 data; - u8 dev = port_data[sata_port].phy_devs; - spin_lock(&cphy_lock); - writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800); - data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr)); - spin_unlock(&cphy_lock); - return data; -} - -static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data) -{ - u8 dev = port_data[sata_port].phy_devs; - spin_lock(&cphy_lock); - writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800); - writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr)); - spin_unlock(&cphy_lock); -} - -static void combo_phy_wait_for_ready(u8 sata_port) -{ - while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY) - udelay(5); -} - -static u32 combo_phy_read(u8 sata_port, u32 addr) -{ - combo_phy_wait_for_ready(sata_port); - __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr); - __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START); - combo_phy_wait_for_ready(sata_port); - return __combo_phy_reg_read(sata_port, SERDES_CR_DATA); -} - -static void combo_phy_write(u8 sata_port, u32 addr, u32 data) -{ - combo_phy_wait_for_ready(sata_port); - __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr); - __combo_phy_reg_write(sata_port, SERDES_CR_DATA, data); - __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START); -} - -static void highbank_cphy_disable_overrides(u8 sata_port) -{ - u8 lane = port_data[sata_port].lane_mapping; - u32 tmp; - if (unlikely(port_data[sata_port].phy_base == NULL)) - return; - tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); - tmp &= ~CPHY_SATA_RX_OVERRIDE; - combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); -} - -static void cphy_override_tx_attenuation(u8 sata_port, u32 val) -{ - u8 lane = port_data[sata_port].lane_mapping; - u32 tmp; - - if (val & 0x8) - return; - - tmp = combo_phy_read(sata_port, CPHY_TX_INPUT_STS + lane * SPHY_LANE); - tmp &= ~CPHY_SATA_TX_OVERRIDE; - combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); - - tmp |= CPHY_SATA_TX_OVERRIDE; - combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); - - tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN; - combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); -} - -static void cphy_override_rx_mode(u8 sata_port, u32 val) -{ - u8 lane = port_data[sata_port].lane_mapping; - u32 tmp; - tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); - tmp &= ~CPHY_SATA_RX_OVERRIDE; - combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); - - tmp |= CPHY_SATA_RX_OVERRIDE; - combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); - - tmp &= ~CPHY_SATA_DPLL_MODE; - tmp |= val << CPHY_SATA_DPLL_SHIFT; - combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); - - tmp |= CPHY_SATA_DPLL_RESET; - combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); - - tmp &= ~CPHY_SATA_DPLL_RESET; - combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); - - msleep(15); -} - -static void highbank_cphy_override_lane(u8 sata_port) -{ - u8 lane = port_data[sata_port].lane_mapping; - u32 tmp, k = 0; - - if (unlikely(port_data[sata_port].phy_base == NULL)) - return; - do { - tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + - lane * SPHY_LANE); - } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000)); - cphy_override_rx_mode(sata_port, 3); - cphy_override_tx_attenuation(sata_port, port_data[sata_port].tx_atten); -} - -static int highbank_initialize_phys(struct device *dev, void __iomem *addr) -{ - struct device_node *sata_node = dev->of_node; - int phy_count = 0, phy, port = 0, i; - void __iomem *cphy_base[CPHY_PHY_COUNT] = {}; - struct device_node *phy_nodes[CPHY_PHY_COUNT] = {}; - u32 tx_atten[CPHY_PORT_COUNT] = {}; - - memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT); - - do { - u32 tmp; - struct of_phandle_args phy_data; - if (of_parse_phandle_with_args(sata_node, - "calxeda,port-phys", "#phy-cells", - port, &phy_data)) - break; - for (phy = 0; phy < phy_count; phy++) { - if (phy_nodes[phy] == phy_data.np) - break; - } - if (phy_nodes[phy] == NULL) { - phy_nodes[phy] = phy_data.np; - cphy_base[phy] = of_iomap(phy_nodes[phy], 0); - if (cphy_base[phy] == NULL) { - return 0; - } - phy_count += 1; - } - port_data[port].lane_mapping = phy_data.args[0]; - of_property_read_u32(phy_nodes[phy], "phydev", &tmp); - port_data[port].phy_devs = tmp; - port_data[port].phy_base = cphy_base[phy]; - of_node_put(phy_data.np); - port += 1; - } while (port < CPHY_PORT_COUNT); - of_property_read_u32_array(sata_node, "calxeda,tx-atten", - tx_atten, port); - for (i = 0; i < port; i++) - port_data[i].tx_atten = (u8) tx_atten[i]; - return 0; -} - -/* - * The Calxeda SATA phy intermittently fails to bring up a link with Gen3 - * Retrying the phy hard reset can work around the issue, but the drive - * may fail again. In less than 150 out of 15000 test runs, it took more - * than 10 tries for the link to be established (but never more than 35). - * Triple the maximum observed retry count to provide plenty of margin for - * rare events and to guarantee that the link is established. - * - * Also, the default 2 second time-out on a failed drive is too long in - * this situation. The uboot implementation of the same driver function - * uses a much shorter time-out period and never experiences a time out - * issue. Reducing the time-out to 500ms improves the responsiveness. - * The other timing constants were kept the same as the stock AHCI driver. - * This change was also tested 15000 times on 24 drives and none of them - * experienced a time out. - */ -static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - static const unsigned long timing[] = { 5, 100, 500}; - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_host_priv *hpriv = ap->host->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - struct ata_taskfile tf; - bool online; - u32 sstatus; - int rc; - int retry = 100; - - hpriv->stop_engine(ap); - - /* clear D2H reception area to properly wait for D2H FIS */ - ata_tf_init(link->device, &tf); - tf.command = ATA_BUSY; - ata_tf_to_fis(&tf, 0, 0, d2h_fis); - - do { - highbank_cphy_disable_overrides(link->ap->port_no); - rc = sata_link_hardreset(link, timing, deadline, &online, NULL); - highbank_cphy_override_lane(link->ap->port_no); - - /* If the status is 1, we are connected, but the link did not - * come up. So retry resetting the link again. - */ - if (sata_scr_read(link, SCR_STATUS, &sstatus)) - break; - if (!(sstatus & 0x3)) - break; - } while (!online && retry--); - - hpriv->start_engine(ap); - - if (online) - *class = ahci_dev_classify(ap); - - return rc; -} - -static struct ata_port_operations ahci_highbank_ops = { - .inherits = &ahci_ops, - .hardreset = ahci_highbank_hardreset, - .transmit_led_message = ecx_transmit_led_message, -}; - -static const struct ata_port_info ahci_highbank_port_info = { - .flags = AHCI_FLAG_COMMON, - .pio_mask = ATA_PIO4, - .udma_mask = ATA_UDMA6, - .port_ops = &ahci_highbank_ops, -}; - -static struct scsi_host_template ahci_highbank_platform_sht = { - AHCI_SHT("sata_highbank"), -}; - -static const struct of_device_id ahci_of_match[] = { - { .compatible = "calxeda,hb-ahci" }, - {}, -}; -MODULE_DEVICE_TABLE(of, ahci_of_match); - -static int ahci_highbank_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct ahci_host_priv *hpriv; - struct ecx_plat_data *pdata; - struct ata_host *host; - struct resource *mem; - int irq; - int i; - int rc; - u32 n_ports; - struct ata_port_info pi = ahci_highbank_port_info; - const struct ata_port_info *ppi[] = { &pi, NULL }; - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(dev, "no mmio space\n"); - return -EINVAL; - } - - irq = platform_get_irq(pdev, 0); - if (irq <= 0) { - dev_err(dev, "no irq\n"); - return -EINVAL; - } - - hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) { - dev_err(dev, "can't alloc ahci_host_priv\n"); - return -ENOMEM; - } - pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) { - dev_err(dev, "can't alloc ecx_plat_data\n"); - return -ENOMEM; - } - - hpriv->irq = irq; - hpriv->flags |= (unsigned long)pi.private_data; - - hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); - if (!hpriv->mmio) { - dev_err(dev, "can't map %pR\n", mem); - return -ENOMEM; - } - - rc = highbank_initialize_phys(dev, hpriv->mmio); - if (rc) - return rc; - - - ahci_save_initial_config(dev, hpriv); - - /* prepare host */ - if (hpriv->cap & HOST_CAP_NCQ) - pi.flags |= ATA_FLAG_NCQ; - - if (hpriv->cap & HOST_CAP_PMP) - pi.flags |= ATA_FLAG_PMP; - - if (hpriv->cap & HOST_CAP_64) - dma_set_coherent_mask(dev, DMA_BIT_MASK(64)); - - /* CAP.NP sometimes indicate the index of the last enabled - * port, at other times, that of the last possible port, so - * determining the maximum port number requires looking at - * both CAP.NP and port_map. - */ - n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); - - pdata->n_ports = n_ports; - hpriv->plat_data = pdata; - highbank_set_em_messages(dev, hpriv, &pi); - - host = ata_host_alloc_pinfo(dev, ppi, n_ports); - if (!host) { - rc = -ENOMEM; - goto err0; - } - - host->private_data = hpriv; - - if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) - host->flags |= ATA_HOST_PARALLEL_SCAN; - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - - ata_port_desc(ap, "mmio %pR", mem); - ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); - - /* set enclosure management message type */ - if (ap->flags & ATA_FLAG_EM) - ap->em_message_type = hpriv->em_msg_type; - - /* disabled/not-implemented port */ - if (!(hpriv->port_map & (1 << i))) - ap->ops = &ata_dummy_port_ops; - } - - rc = ahci_reset_controller(host); - if (rc) - goto err0; - - ahci_init_controller(host); - ahci_print_info(host, "platform"); - - rc = ahci_host_activate(host, &ahci_highbank_platform_sht); - if (rc) - goto err0; - - return 0; -err0: - return rc; -} - -#ifdef CONFIG_PM_SLEEP -static int ahci_highbank_suspend(struct device *dev) -{ - struct ata_host *host = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = hpriv->mmio; - u32 ctl; - int rc; - - if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { - dev_err(dev, "firmware update required for suspend/resume\n"); - return -EIO; - } - - /* - * AHCI spec rev1.1 section 8.3.3: - * Software must disable interrupts prior to requesting a - * transition of the HBA to D3 state. - */ - ctl = readl(mmio + HOST_CTL); - ctl &= ~HOST_IRQ_EN; - writel(ctl, mmio + HOST_CTL); - readl(mmio + HOST_CTL); /* flush */ - - rc = ata_host_suspend(host, PMSG_SUSPEND); - if (rc) - return rc; - - return 0; -} - -static int ahci_highbank_resume(struct device *dev) -{ - struct ata_host *host = dev_get_drvdata(dev); - int rc; - - if (dev->power.power_state.event == PM_EVENT_SUSPEND) { - rc = ahci_reset_controller(host); - if (rc) - return rc; - - ahci_init_controller(host); - } - - ata_host_resume(host); - - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops, - ahci_highbank_suspend, ahci_highbank_resume); - -static struct platform_driver ahci_highbank_driver = { - .remove = ata_platform_remove_one, - .driver = { - .name = "highbank-ahci", - .of_match_table = ahci_of_match, - .pm = &ahci_highbank_pm_ops, - }, - .probe = ahci_highbank_probe, -}; - -module_platform_driver(ahci_highbank_driver); - -MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver"); -MODULE_AUTHOR("Mark Langsdorf "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("sata:highbank");