@@ -87,16 +87,32 @@ static void ghes_edac_count_dimms(const struct dmi_header *dh, void *arg)
(*num_dimm)++;
}
-static int get_dimm_smbios_index(struct mem_ctl_info *mci, u16 handle)
+static struct dimm_info *find_dimm_by_handle(struct mem_ctl_info *mci,
+ u16 handle)
{
struct dimm_info *dimm;
mci_for_each_dimm(mci, dimm) {
if (dimm->smbios_handle == handle)
- return dimm->idx;
+ return dimm;
}
- return -1;
+ return NULL;
+}
+
+static void ghes_dimm_setup_label(struct dimm_info *dimm, u16 handle)
+{
+ const char *bank = NULL, *device = NULL;
+
+ dmi_memdev_name(handle, &bank, &device);
+
+ /* both strings must be non-zero */
+ if (bank && *bank && device && *device)
+ snprintf(dimm->label, sizeof(dimm->label),
+ "%s %s", bank, device);
+ else
+ snprintf(dimm->label, sizeof(dimm->label),
+ "unknown memory (handle: 0x%.4x)", handle);
}
static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
@@ -179,9 +195,7 @@ static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
dimm->dtype = DEV_UNKNOWN;
dimm->grain = 128; /* Likely, worse case */
- /*
- * FIXME: It shouldn't be hard to also fill the DIMM labels
- */
+ ghes_dimm_setup_label(dimm, entry->handle);
if (dimm->nr_pages) {
edac_dbg(1, "DIMM%i: %s size = %d MB%s\n",
@@ -344,19 +358,17 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
if (mem_err->validation_bits & CPER_MEM_VALID_BIT_POSITION)
p += sprintf(p, "bit_pos:%d ", mem_err->bit_pos);
if (mem_err->validation_bits & CPER_MEM_VALID_MODULE_HANDLE) {
- const char *bank = NULL, *device = NULL;
- int index = -1;
+ struct dimm_info *dimm;
- dmi_memdev_name(mem_err->mem_dev_handle, &bank, &device);
- if (bank != NULL && device != NULL)
- p += sprintf(p, "DIMM location:%s %s ", bank, device);
- else
+ dimm = find_dimm_by_handle(mci, mem_err->mem_dev_handle);
+ if (dimm) {
+ e->top_layer = dimm->idx;
+ strcpy(e->label, dimm->label);
+ p += sprintf(p, "DIMM location:%s ", dimm->label);
+ } else {
p += sprintf(p, "DIMM DMI handle: 0x%.4x ",
mem_err->mem_dev_handle);
-
- index = get_dimm_smbios_index(mci, mem_err->mem_dev_handle);
- if (index >= 0)
- e->top_layer = index;
+ }
}
if (p > e->location)
*(p - 1) = '\0';
The ghes driver reports errors with 'unknown label' even if the actual DIMM label is known, e.g.: EDAC MC0: 1 CE Single-bit ECC on unknown label (node:0 card:0 module:0 rank:1 bank:0 col:13 bit_pos:16 DIMM location:N0 DIMM_A0 page:0x966a9b3 offset:0x0 grain:1 syndrome:0x0 - APEI location: node:0 card:0 module:0 rank:1 bank:0 col:13 bit_pos:16 DIMM location:N0 DIMM_A0 status(0x0000000000000400): Storage error in DRAM memory) Fix this by using struct dimm_info's label string in error reports: EDAC MC0: 1 CE Single-bit ECC on N0 DIMM_A0 (node:0 card:0 module:0 rank:1 bank:515 col:14 bit_pos:16 DIMM location:N0 DIMM_A0 page:0x99223d8 offset:0x0 grain:1 syndrome:0x0 - APEI location: node:0 card:0 module:0 rank:1 bank:515 col:14 bit_pos:16 DIMM location:N0 DIMM_A0 status(0x0000000000000400): Storage error in DRAM memory) The labels are initialized by reading the bank and device strings from DMI. Now, the label information can also read from sysfs. E.g. a ThunderX2 system will show the following: /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:N0 DIMM_A0 /sys/devices/system/edac/mc/mc0/dimm1/dimm_label:N0 DIMM_B0 /sys/devices/system/edac/mc/mc0/dimm2/dimm_label:N0 DIMM_C0 /sys/devices/system/edac/mc/mc0/dimm3/dimm_label:N0 DIMM_D0 /sys/devices/system/edac/mc/mc0/dimm4/dimm_label:N0 DIMM_E0 /sys/devices/system/edac/mc/mc0/dimm5/dimm_label:N0 DIMM_F0 /sys/devices/system/edac/mc/mc0/dimm6/dimm_label:N0 DIMM_G0 /sys/devices/system/edac/mc/mc0/dimm7/dimm_label:N0 DIMM_H0 /sys/devices/system/edac/mc/mc0/dimm8/dimm_label:N1 DIMM_I0 /sys/devices/system/edac/mc/mc0/dimm9/dimm_label:N1 DIMM_J0 /sys/devices/system/edac/mc/mc0/dimm10/dimm_label:N1 DIMM_K0 /sys/devices/system/edac/mc/mc0/dimm11/dimm_label:N1 DIMM_L0 /sys/devices/system/edac/mc/mc0/dimm12/dimm_label:N1 DIMM_M0 /sys/devices/system/edac/mc/mc0/dimm13/dimm_label:N1 DIMM_N0 /sys/devices/system/edac/mc/mc0/dimm14/dimm_label:N1 DIMM_O0 /sys/devices/system/edac/mc/mc0/dimm15/dimm_label:N1 DIMM_P0 Since dimm_labels can be rewritten, that label will be used in a later error report: # echo foobar >/sys/devices/system/edac/mc/mc0/dimm0/dimm_label # # some error injection here # dmesg | grep foobar [ 2119.784489] EDAC MC0: 1 CE Single-bit ECC on foobar (node:0 card:0 module:0 rank:0 bank:769 col:1 bit_pos:16 DIMM location:foobar page:0x94d027 offset:0x0 grain:1 syndrome:0x0 - APEI location: node:0 card:0 module:0 rank:0 bank:769 col:1 bit_pos:16 DIMM location:foobar status(0x0000000000000400): Storage error in DRAM memory) Signed-off-by: Robert Richter <rrichter@marvell.com> --- drivers/edac/ghes_edac.c | 44 +++++++++++++++++++++++++--------------- 1 file changed, 28 insertions(+), 16 deletions(-)