From patchwork Tue Nov 12 08:41:34 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Ellerman X-Patchwork-Id: 13871904 Received: from mail.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2300120B812; Tue, 12 Nov 2024 08:41:50 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=150.107.74.76 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1731400916; cv=none; b=N/WuXZeMc/Ta5OD5kZq2YPNLFNxX+G7SRWK25SKdS/aMFpYoU+5QO/BxTwowdf/lTO8Gor1fe+G7RdWKWnBMYjJECBhIQvXcGrm6AbLYXDtbnSHXOJP1OEYEUYxY0vtW2cGciqbkMdW9CKl/eu0cVSP0K5WN4J0kwMnx+AGs7n4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1731400916; c=relaxed/simple; bh=GxtnvSMpqsWwBc9LQa257AfGAsNDDZtw9MEmBKQlOe4=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=kc7Ez8U+1A8rbVKt19ZgtyVdnbaLWRWWZqs6s2CTsfKPhzHB9D/6E76Tuo/lWAdFKA631FMJOiF7+coyyDym/ZXqIckUYJc8/FZEB2R2Sjpliq59LCadOE4kcqrOV/oTW4KBjtwTOTqaLHPQwqV5kcCzTH4qkCHasU2hk595GaU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=ellerman.id.au; spf=pass smtp.mailfrom=ellerman.id.au; dkim=pass (2048-bit key) header.d=ellerman.id.au header.i=@ellerman.id.au header.b=RYeybT8H; arc=none smtp.client-ip=150.107.74.76 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=ellerman.id.au Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ellerman.id.au Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=ellerman.id.au header.i=@ellerman.id.au header.b="RYeybT8H" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ellerman.id.au; s=201909; t=1731400906; bh=guofuncCx9LHvRciGxxQfxaRlHdEfqABn5ehxOafR68=; h=From:To:Cc:Subject:Date:From; b=RYeybT8HXi34ZAZ3cLGxm6aBEQkMgW6jIAlBflqcU/s3x6a9uFYds6WvV1AZOi9r6 OwjZh641NGqLA5lN3OGXWV6J9Lu1OXqRme5K6zCwKuSZf/2LbfJo0aECVLE+se9pEH r7AMuzR69+JeQ6LKSfdKhNuG6ni/hpPt0uehnDv9IVOQwh4yqVTQC4mMLAoXIRuJoi j6TrCOPZmdhsJgVuyyxmuuDZP2kZyYHddO2jh7///ysevO+teKMqjAyT8vL3o59fxI GpOywAd0A9iNo9EP0lds8U1exHpIOKA2KYLSl7j4ttI1EKj+MyXiXDJjYg6uZfbKeF y4wH1G5wKA2dQ== Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (Client did not present a certificate) by mail.ozlabs.org (Postfix) with ESMTPSA id 4XnfzF2Ms9z4wyh; Tue, 12 Nov 2024 19:41:45 +1100 (AEDT) From: Michael Ellerman To: linux-edac@vger.kernel.org Cc: , , bp@alien8.de, tony.luck@intel.com Subject: [PATCH] EDAC/powerpc: Remove PPC_MAPLE drivers Date: Tue, 12 Nov 2024 19:41:34 +1100 Message-ID: <20241112084134.411964-1-mpe@ellerman.id.au> X-Mailer: git-send-email 2.47.0 Precedence: bulk X-Mailing-List: linux-edac@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 These two drivers are only buildable for the powerpc "maple" platform (CONFIG_PPC_MAPLE), which has now been removed, see commit 62f8f307c80e ("powerpc/64: Remove maple platform"). Remove the drivers. Signed-off-by: Michael Ellerman --- drivers/edac/Kconfig | 18 -- drivers/edac/Makefile | 2 - drivers/edac/amd8111_edac.c | 596 ------------------------------------ drivers/edac/amd8111_edac.h | 118 ------- drivers/edac/amd8131_edac.c | 358 ---------------------- drivers/edac/amd8131_edac.h | 107 ------- 6 files changed, 1199 deletions(-) delete mode 100644 drivers/edac/amd8111_edac.c delete mode 100644 drivers/edac/amd8111_edac.h delete mode 100644 drivers/edac/amd8131_edac.c delete mode 100644 drivers/edac/amd8131_edac.h The removal commit is in the powerpc/next branch: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git/log/?h=next I can take this via the powerpc tree if that's easiest, let me know. diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 81af6c344d6b..06f7b43a6f78 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -311,24 +311,6 @@ config EDAC_CELL Cell Broadband Engine internal memory controller on platform without a hypervisor -config EDAC_AMD8131 - tristate "AMD8131 HyperTransport PCI-X Tunnel" - depends on PCI && PPC_MAPLE - help - Support for error detection and correction on the - AMD8131 HyperTransport PCI-X Tunnel chip. - Note, add more Kconfig dependency if it's adopted - on some machine other than Maple. - -config EDAC_AMD8111 - tristate "AMD8111 HyperTransport I/O Hub" - depends on PCI && PPC_MAPLE - help - Support for error detection and correction on the - AMD8111 HyperTransport I/O Hub chip. - Note, add more Kconfig dependency if it's adopted - on some machine other than Maple. - config EDAC_CPC925 tristate "IBM CPC925 Memory Controller (PPC970FX)" depends on PPC64 diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index faf310eec4a6..f9cf19d8d13d 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -63,8 +63,6 @@ i10nm_edac-y := i10nm_base.o obj-$(CONFIG_EDAC_I10NM) += i10nm_edac.o skx_edac_common.o obj-$(CONFIG_EDAC_CELL) += cell_edac.o -obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o -obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o obj-$(CONFIG_EDAC_HIGHBANK_MC) += highbank_mc_edac.o obj-$(CONFIG_EDAC_HIGHBANK_L2) += highbank_l2_edac.o diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c deleted file mode 100644 index a6d3013d5823..000000000000 --- a/drivers/edac/amd8111_edac.c +++ /dev/null @@ -1,596 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * amd8111_edac.c, AMD8111 Hyper Transport chip EDAC kernel module - * - * Copyright (c) 2008 Wind River Systems, Inc. - * - * Authors: Cao Qingtao - * Benjamin Walsh - * Hu Yongqi - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "edac_module.h" -#include "amd8111_edac.h" - -#define AMD8111_EDAC_REVISION " Ver: 1.0.0" -#define AMD8111_EDAC_MOD_STR "amd8111_edac" - -#define PCI_DEVICE_ID_AMD_8111_PCI 0x7460 - -enum amd8111_edac_devs { - LPC_BRIDGE = 0, -}; - -enum amd8111_edac_pcis { - PCI_BRIDGE = 0, -}; - -/* Wrapper functions for accessing PCI configuration space */ -static int edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32) -{ - int ret; - - ret = pci_read_config_dword(dev, reg, val32); - if (ret != 0) - printk(KERN_ERR AMD8111_EDAC_MOD_STR - " PCI Access Read Error at 0x%x\n", reg); - - return ret; -} - -static void edac_pci_read_byte(struct pci_dev *dev, int reg, u8 *val8) -{ - int ret; - - ret = pci_read_config_byte(dev, reg, val8); - if (ret != 0) - printk(KERN_ERR AMD8111_EDAC_MOD_STR - " PCI Access Read Error at 0x%x\n", reg); -} - -static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32) -{ - int ret; - - ret = pci_write_config_dword(dev, reg, val32); - if (ret != 0) - printk(KERN_ERR AMD8111_EDAC_MOD_STR - " PCI Access Write Error at 0x%x\n", reg); -} - -static void edac_pci_write_byte(struct pci_dev *dev, int reg, u8 val8) -{ - int ret; - - ret = pci_write_config_byte(dev, reg, val8); - if (ret != 0) - printk(KERN_ERR AMD8111_EDAC_MOD_STR - " PCI Access Write Error at 0x%x\n", reg); -} - -/* - * device-specific methods for amd8111 PCI Bridge Controller - * - * Error Reporting and Handling for amd8111 chipset could be found - * in its datasheet 3.1.2 section, P37 - */ -static void amd8111_pci_bridge_init(struct amd8111_pci_info *pci_info) -{ - u32 val32; - struct pci_dev *dev = pci_info->dev; - - /* First clear error detection flags on the host interface */ - - /* Clear SSE/SMA/STA flags in the global status register*/ - edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); - if (val32 & PCI_STSCMD_CLEAR_MASK) - edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); - - /* Clear CRC and Link Fail flags in HT Link Control reg */ - edac_pci_read_dword(dev, REG_HT_LINK, &val32); - if (val32 & HT_LINK_CLEAR_MASK) - edac_pci_write_dword(dev, REG_HT_LINK, val32); - - /* Second clear all fault on the secondary interface */ - - /* Clear error flags in the memory-base limit reg. */ - edac_pci_read_dword(dev, REG_MEM_LIM, &val32); - if (val32 & MEM_LIMIT_CLEAR_MASK) - edac_pci_write_dword(dev, REG_MEM_LIM, val32); - - /* Clear Discard Timer Expired flag in Interrupt/Bridge Control reg */ - edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); - if (val32 & PCI_INTBRG_CTRL_CLEAR_MASK) - edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); - - /* Last enable error detections */ - if (edac_op_state == EDAC_OPSTATE_POLL) { - /* Enable System Error reporting in global status register */ - edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); - val32 |= PCI_STSCMD_SERREN; - edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); - - /* Enable CRC Sync flood packets to HyperTransport Link */ - edac_pci_read_dword(dev, REG_HT_LINK, &val32); - val32 |= HT_LINK_CRCFEN; - edac_pci_write_dword(dev, REG_HT_LINK, val32); - - /* Enable SSE reporting etc in Interrupt control reg */ - edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); - val32 |= PCI_INTBRG_CTRL_POLL_MASK; - edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); - } -} - -static void amd8111_pci_bridge_exit(struct amd8111_pci_info *pci_info) -{ - u32 val32; - struct pci_dev *dev = pci_info->dev; - - if (edac_op_state == EDAC_OPSTATE_POLL) { - /* Disable System Error reporting */ - edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); - val32 &= ~PCI_STSCMD_SERREN; - edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); - - /* Disable CRC flood packets */ - edac_pci_read_dword(dev, REG_HT_LINK, &val32); - val32 &= ~HT_LINK_CRCFEN; - edac_pci_write_dword(dev, REG_HT_LINK, val32); - - /* Disable DTSERREN/MARSP/SERREN in Interrupt Control reg */ - edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); - val32 &= ~PCI_INTBRG_CTRL_POLL_MASK; - edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); - } -} - -static void amd8111_pci_bridge_check(struct edac_pci_ctl_info *edac_dev) -{ - struct amd8111_pci_info *pci_info = edac_dev->pvt_info; - struct pci_dev *dev = pci_info->dev; - u32 val32; - - /* Check out PCI Bridge Status and Command Register */ - edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); - if (val32 & PCI_STSCMD_CLEAR_MASK) { - printk(KERN_INFO "Error(s) in PCI bridge status and command" - "register on device %s\n", pci_info->ctl_name); - printk(KERN_INFO "SSE: %d, RMA: %d, RTA: %d\n", - (val32 & PCI_STSCMD_SSE) != 0, - (val32 & PCI_STSCMD_RMA) != 0, - (val32 & PCI_STSCMD_RTA) != 0); - - val32 |= PCI_STSCMD_CLEAR_MASK; - edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check out HyperTransport Link Control Register */ - edac_pci_read_dword(dev, REG_HT_LINK, &val32); - if (val32 & HT_LINK_LKFAIL) { - printk(KERN_INFO "Error(s) in hypertransport link control" - "register on device %s\n", pci_info->ctl_name); - printk(KERN_INFO "LKFAIL: %d\n", - (val32 & HT_LINK_LKFAIL) != 0); - - val32 |= HT_LINK_LKFAIL; - edac_pci_write_dword(dev, REG_HT_LINK, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check out PCI Interrupt and Bridge Control Register */ - edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); - if (val32 & PCI_INTBRG_CTRL_DTSTAT) { - printk(KERN_INFO "Error(s) in PCI interrupt and bridge control" - "register on device %s\n", pci_info->ctl_name); - printk(KERN_INFO "DTSTAT: %d\n", - (val32 & PCI_INTBRG_CTRL_DTSTAT) != 0); - - val32 |= PCI_INTBRG_CTRL_DTSTAT; - edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check out PCI Bridge Memory Base-Limit Register */ - edac_pci_read_dword(dev, REG_MEM_LIM, &val32); - if (val32 & MEM_LIMIT_CLEAR_MASK) { - printk(KERN_INFO - "Error(s) in mem limit register on %s device\n", - pci_info->ctl_name); - printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n" - "RTA: %d, STA: %d, MDPE: %d\n", - (val32 & MEM_LIMIT_DPE) != 0, - (val32 & MEM_LIMIT_RSE) != 0, - (val32 & MEM_LIMIT_RMA) != 0, - (val32 & MEM_LIMIT_RTA) != 0, - (val32 & MEM_LIMIT_STA) != 0, - (val32 & MEM_LIMIT_MDPE) != 0); - - val32 |= MEM_LIMIT_CLEAR_MASK; - edac_pci_write_dword(dev, REG_MEM_LIM, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } -} - -static struct resource *legacy_io_res; -static int at_compat_reg_broken; -#define LEGACY_NR_PORTS 1 - -/* device-specific methods for amd8111 LPC Bridge device */ -static void amd8111_lpc_bridge_init(struct amd8111_dev_info *dev_info) -{ - u8 val8; - struct pci_dev *dev = dev_info->dev; - - /* First clear REG_AT_COMPAT[SERR, IOCHK] if necessary */ - legacy_io_res = request_region(REG_AT_COMPAT, LEGACY_NR_PORTS, - AMD8111_EDAC_MOD_STR); - if (!legacy_io_res) - printk(KERN_INFO "%s: failed to request legacy I/O region " - "start %d, len %d\n", __func__, - REG_AT_COMPAT, LEGACY_NR_PORTS); - else { - val8 = __do_inb(REG_AT_COMPAT); - if (val8 == 0xff) { /* buggy port */ - printk(KERN_INFO "%s: port %d is buggy, not supported" - " by hardware?\n", __func__, REG_AT_COMPAT); - at_compat_reg_broken = 1; - release_region(REG_AT_COMPAT, LEGACY_NR_PORTS); - legacy_io_res = NULL; - } else { - u8 out8 = 0; - if (val8 & AT_COMPAT_SERR) - out8 = AT_COMPAT_CLRSERR; - if (val8 & AT_COMPAT_IOCHK) - out8 |= AT_COMPAT_CLRIOCHK; - if (out8 > 0) - __do_outb(out8, REG_AT_COMPAT); - } - } - - /* Second clear error flags on LPC bridge */ - edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8); - if (val8 & IO_CTRL_1_CLEAR_MASK) - edac_pci_write_byte(dev, REG_IO_CTRL_1, val8); -} - -static void amd8111_lpc_bridge_exit(struct amd8111_dev_info *dev_info) -{ - if (legacy_io_res) - release_region(REG_AT_COMPAT, LEGACY_NR_PORTS); -} - -static void amd8111_lpc_bridge_check(struct edac_device_ctl_info *edac_dev) -{ - struct amd8111_dev_info *dev_info = edac_dev->pvt_info; - struct pci_dev *dev = dev_info->dev; - u8 val8; - - edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8); - if (val8 & IO_CTRL_1_CLEAR_MASK) { - printk(KERN_INFO - "Error(s) in IO control register on %s device\n", - dev_info->ctl_name); - printk(KERN_INFO "LPC ERR: %d, PW2LPC: %d\n", - (val8 & IO_CTRL_1_LPC_ERR) != 0, - (val8 & IO_CTRL_1_PW2LPC) != 0); - - val8 |= IO_CTRL_1_CLEAR_MASK; - edac_pci_write_byte(dev, REG_IO_CTRL_1, val8); - - edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); - } - - if (at_compat_reg_broken == 0) { - u8 out8 = 0; - val8 = __do_inb(REG_AT_COMPAT); - if (val8 & AT_COMPAT_SERR) - out8 = AT_COMPAT_CLRSERR; - if (val8 & AT_COMPAT_IOCHK) - out8 |= AT_COMPAT_CLRIOCHK; - if (out8 > 0) { - __do_outb(out8, REG_AT_COMPAT); - edac_device_handle_ue(edac_dev, 0, 0, - edac_dev->ctl_name); - } - } -} - -/* General devices represented by edac_device_ctl_info */ -static struct amd8111_dev_info amd8111_devices[] = { - [LPC_BRIDGE] = { - .err_dev = PCI_DEVICE_ID_AMD_8111_LPC, - .ctl_name = "lpc", - .init = amd8111_lpc_bridge_init, - .exit = amd8111_lpc_bridge_exit, - .check = amd8111_lpc_bridge_check, - }, - {0}, -}; - -/* PCI controllers represented by edac_pci_ctl_info */ -static struct amd8111_pci_info amd8111_pcis[] = { - [PCI_BRIDGE] = { - .err_dev = PCI_DEVICE_ID_AMD_8111_PCI, - .ctl_name = "AMD8111_PCI_Controller", - .init = amd8111_pci_bridge_init, - .exit = amd8111_pci_bridge_exit, - .check = amd8111_pci_bridge_check, - }, - {0}, -}; - -static int amd8111_dev_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - struct amd8111_dev_info *dev_info = &amd8111_devices[id->driver_data]; - int ret = -ENODEV; - - dev_info->dev = pci_get_device(PCI_VENDOR_ID_AMD, - dev_info->err_dev, NULL); - - if (!dev_info->dev) { - printk(KERN_ERR "EDAC device not found:" - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, dev_info->err_dev, - dev_info->ctl_name); - goto err; - } - - if (pci_enable_device(dev_info->dev)) { - printk(KERN_ERR "failed to enable:" - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, dev_info->err_dev, - dev_info->ctl_name); - goto err_dev_put; - } - - /* - * we do not allocate extra private structure for - * edac_device_ctl_info, but make use of existing - * one instead. - */ - dev_info->edac_idx = edac_device_alloc_index(); - dev_info->edac_dev = - edac_device_alloc_ctl_info(0, dev_info->ctl_name, 1, - NULL, 0, 0, dev_info->edac_idx); - if (!dev_info->edac_dev) { - ret = -ENOMEM; - goto err_dev_put; - } - - dev_info->edac_dev->pvt_info = dev_info; - dev_info->edac_dev->dev = &dev_info->dev->dev; - dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; - dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); - - if (edac_op_state == EDAC_OPSTATE_POLL) - dev_info->edac_dev->edac_check = dev_info->check; - - if (dev_info->init) - dev_info->init(dev_info); - - if (edac_device_add_device(dev_info->edac_dev) > 0) { - printk(KERN_ERR "failed to add edac_dev for %s\n", - dev_info->ctl_name); - goto err_edac_free_ctl; - } - - printk(KERN_INFO "added one edac_dev on AMD8111 " - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, dev_info->err_dev, - dev_info->ctl_name); - - return 0; - -err_edac_free_ctl: - edac_device_free_ctl_info(dev_info->edac_dev); -err_dev_put: - pci_dev_put(dev_info->dev); -err: - return ret; -} - -static void amd8111_dev_remove(struct pci_dev *dev) -{ - struct amd8111_dev_info *dev_info; - - for (dev_info = amd8111_devices; dev_info->err_dev; dev_info++) - if (dev_info->dev->device == dev->device) - break; - - if (!dev_info->err_dev) /* should never happen */ - return; - - if (dev_info->edac_dev) { - edac_device_del_device(dev_info->edac_dev->dev); - edac_device_free_ctl_info(dev_info->edac_dev); - } - - if (dev_info->exit) - dev_info->exit(dev_info); - - pci_dev_put(dev_info->dev); -} - -static int amd8111_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - struct amd8111_pci_info *pci_info = &amd8111_pcis[id->driver_data]; - int ret = -ENODEV; - - pci_info->dev = pci_get_device(PCI_VENDOR_ID_AMD, - pci_info->err_dev, NULL); - - if (!pci_info->dev) { - printk(KERN_ERR "EDAC device not found:" - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, pci_info->err_dev, - pci_info->ctl_name); - goto err; - } - - if (pci_enable_device(pci_info->dev)) { - printk(KERN_ERR "failed to enable:" - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, pci_info->err_dev, - pci_info->ctl_name); - goto err_dev_put; - } - - /* - * we do not allocate extra private structure for - * edac_pci_ctl_info, but make use of existing - * one instead. - */ - pci_info->edac_idx = edac_pci_alloc_index(); - pci_info->edac_dev = edac_pci_alloc_ctl_info(0, pci_info->ctl_name); - if (!pci_info->edac_dev) { - ret = -ENOMEM; - goto err_dev_put; - } - - pci_info->edac_dev->pvt_info = pci_info; - pci_info->edac_dev->dev = &pci_info->dev->dev; - pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; - pci_info->edac_dev->ctl_name = pci_info->ctl_name; - pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev); - - if (edac_op_state == EDAC_OPSTATE_POLL) - pci_info->edac_dev->edac_check = pci_info->check; - - if (pci_info->init) - pci_info->init(pci_info); - - if (edac_pci_add_device(pci_info->edac_dev, pci_info->edac_idx) > 0) { - printk(KERN_ERR "failed to add edac_pci for %s\n", - pci_info->ctl_name); - goto err_edac_free_ctl; - } - - printk(KERN_INFO "added one edac_pci on AMD8111 " - "vendor %x, device %x, name %s\n", - PCI_VENDOR_ID_AMD, pci_info->err_dev, - pci_info->ctl_name); - - return 0; - -err_edac_free_ctl: - edac_pci_free_ctl_info(pci_info->edac_dev); -err_dev_put: - pci_dev_put(pci_info->dev); -err: - return ret; -} - -static void amd8111_pci_remove(struct pci_dev *dev) -{ - struct amd8111_pci_info *pci_info; - - for (pci_info = amd8111_pcis; pci_info->err_dev; pci_info++) - if (pci_info->dev->device == dev->device) - break; - - if (!pci_info->err_dev) /* should never happen */ - return; - - if (pci_info->edac_dev) { - edac_pci_del_device(pci_info->edac_dev->dev); - edac_pci_free_ctl_info(pci_info->edac_dev); - } - - if (pci_info->exit) - pci_info->exit(pci_info); - - pci_dev_put(pci_info->dev); -} - -/* PCI Device ID talbe for general EDAC device */ -static const struct pci_device_id amd8111_edac_dev_tbl[] = { - { - PCI_VEND_DEV(AMD, 8111_LPC), - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .class = 0, - .class_mask = 0, - .driver_data = LPC_BRIDGE, - }, - { - 0, - } /* table is NULL-terminated */ -}; -MODULE_DEVICE_TABLE(pci, amd8111_edac_dev_tbl); - -static struct pci_driver amd8111_edac_dev_driver = { - .name = "AMD8111_EDAC_DEV", - .probe = amd8111_dev_probe, - .remove = amd8111_dev_remove, - .id_table = amd8111_edac_dev_tbl, -}; - -/* PCI Device ID table for EDAC PCI controller */ -static const struct pci_device_id amd8111_edac_pci_tbl[] = { - { - PCI_VEND_DEV(AMD, 8111_PCI), - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .class = 0, - .class_mask = 0, - .driver_data = PCI_BRIDGE, - }, - { - 0, - } /* table is NULL-terminated */ -}; -MODULE_DEVICE_TABLE(pci, amd8111_edac_pci_tbl); - -static struct pci_driver amd8111_edac_pci_driver = { - .name = "AMD8111_EDAC_PCI", - .probe = amd8111_pci_probe, - .remove = amd8111_pci_remove, - .id_table = amd8111_edac_pci_tbl, -}; - -static int __init amd8111_edac_init(void) -{ - int val; - - printk(KERN_INFO "AMD8111 EDAC driver " AMD8111_EDAC_REVISION "\n"); - printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n"); - - /* Only POLL mode supported so far */ - edac_op_state = EDAC_OPSTATE_POLL; - - val = pci_register_driver(&amd8111_edac_dev_driver); - val |= pci_register_driver(&amd8111_edac_pci_driver); - - return val; -} - -static void __exit amd8111_edac_exit(void) -{ - pci_unregister_driver(&amd8111_edac_pci_driver); - pci_unregister_driver(&amd8111_edac_dev_driver); -} - - -module_init(amd8111_edac_init); -module_exit(amd8111_edac_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Cao Qingtao "); -MODULE_DESCRIPTION("AMD8111 HyperTransport I/O Hub EDAC kernel module"); diff --git a/drivers/edac/amd8111_edac.h b/drivers/edac/amd8111_edac.h deleted file mode 100644 index 200cab1b3e42..000000000000 --- a/drivers/edac/amd8111_edac.h +++ /dev/null @@ -1,118 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * amd8111_edac.h, EDAC defs for AMD8111 hypertransport chip - * - * Copyright (c) 2008 Wind River Systems, Inc. - * - * Authors: Cao Qingtao - * Benjamin Walsh - * Hu Yongqi - */ - -#ifndef _AMD8111_EDAC_H_ -#define _AMD8111_EDAC_H_ - -/************************************************************ - * PCI Bridge Status and Command Register, DevA:0x04 - ************************************************************/ -#define REG_PCI_STSCMD 0x04 -enum pci_stscmd_bits { - PCI_STSCMD_SSE = BIT(30), - PCI_STSCMD_RMA = BIT(29), - PCI_STSCMD_RTA = BIT(28), - PCI_STSCMD_SERREN = BIT(8), - PCI_STSCMD_CLEAR_MASK = (PCI_STSCMD_SSE | - PCI_STSCMD_RMA | - PCI_STSCMD_RTA) -}; - -/************************************************************ - * PCI Bridge Memory Base-Limit Register, DevA:0x1c - ************************************************************/ -#define REG_MEM_LIM 0x1c -enum mem_limit_bits { - MEM_LIMIT_DPE = BIT(31), - MEM_LIMIT_RSE = BIT(30), - MEM_LIMIT_RMA = BIT(29), - MEM_LIMIT_RTA = BIT(28), - MEM_LIMIT_STA = BIT(27), - MEM_LIMIT_MDPE = BIT(24), - MEM_LIMIT_CLEAR_MASK = (MEM_LIMIT_DPE | - MEM_LIMIT_RSE | - MEM_LIMIT_RMA | - MEM_LIMIT_RTA | - MEM_LIMIT_STA | - MEM_LIMIT_MDPE) -}; - -/************************************************************ - * HyperTransport Link Control Register, DevA:0xc4 - ************************************************************/ -#define REG_HT_LINK 0xc4 -enum ht_link_bits { - HT_LINK_LKFAIL = BIT(4), - HT_LINK_CRCFEN = BIT(1), - HT_LINK_CLEAR_MASK = (HT_LINK_LKFAIL) -}; - -/************************************************************ - * PCI Bridge Interrupt and Bridge Control, DevA:0x3c - ************************************************************/ -#define REG_PCI_INTBRG_CTRL 0x3c -enum pci_intbrg_ctrl_bits { - PCI_INTBRG_CTRL_DTSERREN = BIT(27), - PCI_INTBRG_CTRL_DTSTAT = BIT(26), - PCI_INTBRG_CTRL_MARSP = BIT(21), - PCI_INTBRG_CTRL_SERREN = BIT(17), - PCI_INTBRG_CTRL_PEREN = BIT(16), - PCI_INTBRG_CTRL_CLEAR_MASK = (PCI_INTBRG_CTRL_DTSTAT), - PCI_INTBRG_CTRL_POLL_MASK = (PCI_INTBRG_CTRL_DTSERREN | - PCI_INTBRG_CTRL_MARSP | - PCI_INTBRG_CTRL_SERREN) -}; - -/************************************************************ - * I/O Control 1 Register, DevB:0x40 - ************************************************************/ -#define REG_IO_CTRL_1 0x40 -enum io_ctrl_1_bits { - IO_CTRL_1_NMIONERR = BIT(7), - IO_CTRL_1_LPC_ERR = BIT(6), - IO_CTRL_1_PW2LPC = BIT(1), - IO_CTRL_1_CLEAR_MASK = (IO_CTRL_1_LPC_ERR | IO_CTRL_1_PW2LPC) -}; - -/************************************************************ - * Legacy I/O Space Registers - ************************************************************/ -#define REG_AT_COMPAT 0x61 -enum at_compat_bits { - AT_COMPAT_SERR = BIT(7), - AT_COMPAT_IOCHK = BIT(6), - AT_COMPAT_CLRIOCHK = BIT(3), - AT_COMPAT_CLRSERR = BIT(2), -}; - -struct amd8111_dev_info { - u16 err_dev; /* PCI Device ID */ - struct pci_dev *dev; - int edac_idx; /* device index */ - char *ctl_name; - struct edac_device_ctl_info *edac_dev; - void (*init)(struct amd8111_dev_info *dev_info); - void (*exit)(struct amd8111_dev_info *dev_info); - void (*check)(struct edac_device_ctl_info *edac_dev); -}; - -struct amd8111_pci_info { - u16 err_dev; /* PCI Device ID */ - struct pci_dev *dev; - int edac_idx; /* pci index */ - const char *ctl_name; - struct edac_pci_ctl_info *edac_dev; - void (*init)(struct amd8111_pci_info *dev_info); - void (*exit)(struct amd8111_pci_info *dev_info); - void (*check)(struct edac_pci_ctl_info *edac_dev); -}; - -#endif /* _AMD8111_EDAC_H_ */ diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c deleted file mode 100644 index 28610ba514f4..000000000000 --- a/drivers/edac/amd8131_edac.c +++ /dev/null @@ -1,358 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * amd8131_edac.c, AMD8131 hypertransport chip EDAC kernel module - * - * Copyright (c) 2008 Wind River Systems, Inc. - * - * Authors: Cao Qingtao - * Benjamin Walsh - * Hu Yongqi - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "edac_module.h" -#include "amd8131_edac.h" - -#define AMD8131_EDAC_REVISION " Ver: 1.0.0" -#define AMD8131_EDAC_MOD_STR "amd8131_edac" - -/* Wrapper functions for accessing PCI configuration space */ -static void edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32) -{ - int ret; - - ret = pci_read_config_dword(dev, reg, val32); - if (ret != 0) - printk(KERN_ERR AMD8131_EDAC_MOD_STR - " PCI Access Read Error at 0x%x\n", reg); -} - -static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32) -{ - int ret; - - ret = pci_write_config_dword(dev, reg, val32); - if (ret != 0) - printk(KERN_ERR AMD8131_EDAC_MOD_STR - " PCI Access Write Error at 0x%x\n", reg); -} - -/* Support up to two AMD8131 chipsets on a platform */ -static struct amd8131_dev_info amd8131_devices[] = { - { - .inst = NORTH_A, - .devfn = DEVFN_PCIX_BRIDGE_NORTH_A, - .ctl_name = "AMD8131_PCIX_NORTH_A", - }, - { - .inst = NORTH_B, - .devfn = DEVFN_PCIX_BRIDGE_NORTH_B, - .ctl_name = "AMD8131_PCIX_NORTH_B", - }, - { - .inst = SOUTH_A, - .devfn = DEVFN_PCIX_BRIDGE_SOUTH_A, - .ctl_name = "AMD8131_PCIX_SOUTH_A", - }, - { - .inst = SOUTH_B, - .devfn = DEVFN_PCIX_BRIDGE_SOUTH_B, - .ctl_name = "AMD8131_PCIX_SOUTH_B", - }, - {.inst = NO_BRIDGE,}, -}; - -static void amd8131_pcix_init(struct amd8131_dev_info *dev_info) -{ - u32 val32; - struct pci_dev *dev = dev_info->dev; - - /* First clear error detection flags */ - edac_pci_read_dword(dev, REG_MEM_LIM, &val32); - if (val32 & MEM_LIMIT_MASK) - edac_pci_write_dword(dev, REG_MEM_LIM, val32); - - /* Clear Discard Timer Timedout flag */ - edac_pci_read_dword(dev, REG_INT_CTLR, &val32); - if (val32 & INT_CTLR_DTS) - edac_pci_write_dword(dev, REG_INT_CTLR, val32); - - /* Clear CRC Error flag on link side A */ - edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); - if (val32 & LNK_CTRL_CRCERR_A) - edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); - - /* Clear CRC Error flag on link side B */ - edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); - if (val32 & LNK_CTRL_CRCERR_B) - edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); - - /* - * Then enable all error detections. - * - * Setup Discard Timer Sync Flood Enable, - * System Error Enable and Parity Error Enable. - */ - edac_pci_read_dword(dev, REG_INT_CTLR, &val32); - val32 |= INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE; - edac_pci_write_dword(dev, REG_INT_CTLR, val32); - - /* Enable overall SERR Error detection */ - edac_pci_read_dword(dev, REG_STS_CMD, &val32); - val32 |= STS_CMD_SERREN; - edac_pci_write_dword(dev, REG_STS_CMD, val32); - - /* Setup CRC Flood Enable for link side A */ - edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); - val32 |= LNK_CTRL_CRCFEN; - edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); - - /* Setup CRC Flood Enable for link side B */ - edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); - val32 |= LNK_CTRL_CRCFEN; - edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); -} - -static void amd8131_pcix_exit(struct amd8131_dev_info *dev_info) -{ - u32 val32; - struct pci_dev *dev = dev_info->dev; - - /* Disable SERR, PERR and DTSE Error detection */ - edac_pci_read_dword(dev, REG_INT_CTLR, &val32); - val32 &= ~(INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE); - edac_pci_write_dword(dev, REG_INT_CTLR, val32); - - /* Disable overall System Error detection */ - edac_pci_read_dword(dev, REG_STS_CMD, &val32); - val32 &= ~STS_CMD_SERREN; - edac_pci_write_dword(dev, REG_STS_CMD, val32); - - /* Disable CRC Sync Flood on link side A */ - edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); - val32 &= ~LNK_CTRL_CRCFEN; - edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); - - /* Disable CRC Sync Flood on link side B */ - edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); - val32 &= ~LNK_CTRL_CRCFEN; - edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); -} - -static void amd8131_pcix_check(struct edac_pci_ctl_info *edac_dev) -{ - struct amd8131_dev_info *dev_info = edac_dev->pvt_info; - struct pci_dev *dev = dev_info->dev; - u32 val32; - - /* Check PCI-X Bridge Memory Base-Limit Register for errors */ - edac_pci_read_dword(dev, REG_MEM_LIM, &val32); - if (val32 & MEM_LIMIT_MASK) { - printk(KERN_INFO "Error(s) in mem limit register " - "on %s bridge\n", dev_info->ctl_name); - printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n" - "RTA: %d, STA: %d, MDPE: %d\n", - val32 & MEM_LIMIT_DPE, - val32 & MEM_LIMIT_RSE, - val32 & MEM_LIMIT_RMA, - val32 & MEM_LIMIT_RTA, - val32 & MEM_LIMIT_STA, - val32 & MEM_LIMIT_MDPE); - - val32 |= MEM_LIMIT_MASK; - edac_pci_write_dword(dev, REG_MEM_LIM, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check if Discard Timer timed out */ - edac_pci_read_dword(dev, REG_INT_CTLR, &val32); - if (val32 & INT_CTLR_DTS) { - printk(KERN_INFO "Error(s) in interrupt and control register " - "on %s bridge\n", dev_info->ctl_name); - printk(KERN_INFO "DTS: %d\n", val32 & INT_CTLR_DTS); - - val32 |= INT_CTLR_DTS; - edac_pci_write_dword(dev, REG_INT_CTLR, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check if CRC error happens on link side A */ - edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); - if (val32 & LNK_CTRL_CRCERR_A) { - printk(KERN_INFO "Error(s) in link conf and control register " - "on %s bridge\n", dev_info->ctl_name); - printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_A); - - val32 |= LNK_CTRL_CRCERR_A; - edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } - - /* Check if CRC error happens on link side B */ - edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); - if (val32 & LNK_CTRL_CRCERR_B) { - printk(KERN_INFO "Error(s) in link conf and control register " - "on %s bridge\n", dev_info->ctl_name); - printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_B); - - val32 |= LNK_CTRL_CRCERR_B; - edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); - - edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); - } -} - -static struct amd8131_info amd8131_chipset = { - .err_dev = PCI_DEVICE_ID_AMD_8131_APIC, - .devices = amd8131_devices, - .init = amd8131_pcix_init, - .exit = amd8131_pcix_exit, - .check = amd8131_pcix_check, -}; - -/* - * There are 4 PCIX Bridges on ATCA-6101 that share the same PCI Device ID, - * so amd8131_probe() would be called by kernel 4 times, with different - * address of pci_dev for each of them each time. - */ -static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct amd8131_dev_info *dev_info; - - for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE; - dev_info++) - if (dev_info->devfn == dev->devfn) - break; - - if (dev_info->inst == NO_BRIDGE) /* should never happen */ - return -ENODEV; - - /* - * We can't call pci_get_device() as we are used to do because - * there are 4 of them but pci_dev_get() instead. - */ - dev_info->dev = pci_dev_get(dev); - - if (pci_enable_device(dev_info->dev)) { - pci_dev_put(dev_info->dev); - printk(KERN_ERR "failed to enable:" - "vendor %x, device %x, devfn %x, name %s\n", - PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev, - dev_info->devfn, dev_info->ctl_name); - return -ENODEV; - } - - /* - * we do not allocate extra private structure for - * edac_pci_ctl_info, but make use of existing - * one instead. - */ - dev_info->edac_idx = edac_pci_alloc_index(); - dev_info->edac_dev = edac_pci_alloc_ctl_info(0, dev_info->ctl_name); - if (!dev_info->edac_dev) - return -ENOMEM; - - dev_info->edac_dev->pvt_info = dev_info; - dev_info->edac_dev->dev = &dev_info->dev->dev; - dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR; - dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); - - if (edac_op_state == EDAC_OPSTATE_POLL) - dev_info->edac_dev->edac_check = amd8131_chipset.check; - - if (amd8131_chipset.init) - amd8131_chipset.init(dev_info); - - if (edac_pci_add_device(dev_info->edac_dev, dev_info->edac_idx) > 0) { - printk(KERN_ERR "failed edac_pci_add_device() for %s\n", - dev_info->ctl_name); - edac_pci_free_ctl_info(dev_info->edac_dev); - return -ENODEV; - } - - printk(KERN_INFO "added one device on AMD8131 " - "vendor %x, device %x, devfn %x, name %s\n", - PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev, - dev_info->devfn, dev_info->ctl_name); - - return 0; -} - -static void amd8131_remove(struct pci_dev *dev) -{ - struct amd8131_dev_info *dev_info; - - for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE; - dev_info++) - if (dev_info->devfn == dev->devfn) - break; - - if (dev_info->inst == NO_BRIDGE) /* should never happen */ - return; - - if (dev_info->edac_dev) { - edac_pci_del_device(dev_info->edac_dev->dev); - edac_pci_free_ctl_info(dev_info->edac_dev); - } - - if (amd8131_chipset.exit) - amd8131_chipset.exit(dev_info); - - pci_dev_put(dev_info->dev); -} - -static const struct pci_device_id amd8131_edac_pci_tbl[] = { - { - PCI_VEND_DEV(AMD, 8131_BRIDGE), - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .class = 0, - .class_mask = 0, - .driver_data = 0, - }, - { - 0, - } /* table is NULL-terminated */ -}; -MODULE_DEVICE_TABLE(pci, amd8131_edac_pci_tbl); - -static struct pci_driver amd8131_edac_driver = { - .name = AMD8131_EDAC_MOD_STR, - .probe = amd8131_probe, - .remove = amd8131_remove, - .id_table = amd8131_edac_pci_tbl, -}; - -static int __init amd8131_edac_init(void) -{ - printk(KERN_INFO "AMD8131 EDAC driver " AMD8131_EDAC_REVISION "\n"); - printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n"); - - /* Only POLL mode supported so far */ - edac_op_state = EDAC_OPSTATE_POLL; - - return pci_register_driver(&amd8131_edac_driver); -} - -static void __exit amd8131_edac_exit(void) -{ - pci_unregister_driver(&amd8131_edac_driver); -} - -module_init(amd8131_edac_init); -module_exit(amd8131_edac_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Cao Qingtao "); -MODULE_DESCRIPTION("AMD8131 HyperTransport PCI-X Tunnel EDAC kernel module"); diff --git a/drivers/edac/amd8131_edac.h b/drivers/edac/amd8131_edac.h deleted file mode 100644 index 5f362abdaf12..000000000000 --- a/drivers/edac/amd8131_edac.h +++ /dev/null @@ -1,107 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * amd8131_edac.h, EDAC defs for AMD8131 hypertransport chip - * - * Copyright (c) 2008 Wind River Systems, Inc. - * - * Authors: Cao Qingtao - * Benjamin Walsh - * Hu Yongqi - */ - -#ifndef _AMD8131_EDAC_H_ -#define _AMD8131_EDAC_H_ - -#define DEVFN_PCIX_BRIDGE_NORTH_A 8 -#define DEVFN_PCIX_BRIDGE_NORTH_B 16 -#define DEVFN_PCIX_BRIDGE_SOUTH_A 24 -#define DEVFN_PCIX_BRIDGE_SOUTH_B 32 - -/************************************************************ - * PCI-X Bridge Status and Command Register, DevA:0x04 - ************************************************************/ -#define REG_STS_CMD 0x04 -enum sts_cmd_bits { - STS_CMD_SSE = BIT(30), - STS_CMD_SERREN = BIT(8) -}; - -/************************************************************ - * PCI-X Bridge Interrupt and Bridge Control Register, - ************************************************************/ -#define REG_INT_CTLR 0x3c -enum int_ctlr_bits { - INT_CTLR_DTSE = BIT(27), - INT_CTLR_DTS = BIT(26), - INT_CTLR_SERR = BIT(17), - INT_CTLR_PERR = BIT(16) -}; - -/************************************************************ - * PCI-X Bridge Memory Base-Limit Register, DevA:0x1C - ************************************************************/ -#define REG_MEM_LIM 0x1c -enum mem_limit_bits { - MEM_LIMIT_DPE = BIT(31), - MEM_LIMIT_RSE = BIT(30), - MEM_LIMIT_RMA = BIT(29), - MEM_LIMIT_RTA = BIT(28), - MEM_LIMIT_STA = BIT(27), - MEM_LIMIT_MDPE = BIT(24), - MEM_LIMIT_MASK = MEM_LIMIT_DPE|MEM_LIMIT_RSE|MEM_LIMIT_RMA| - MEM_LIMIT_RTA|MEM_LIMIT_STA|MEM_LIMIT_MDPE -}; - -/************************************************************ - * Link Configuration And Control Register, side A - ************************************************************/ -#define REG_LNK_CTRL_A 0xc4 - -/************************************************************ - * Link Configuration And Control Register, side B - ************************************************************/ -#define REG_LNK_CTRL_B 0xc8 - -enum lnk_ctrl_bits { - LNK_CTRL_CRCERR_A = BIT(9), - LNK_CTRL_CRCERR_B = BIT(8), - LNK_CTRL_CRCFEN = BIT(1) -}; - -enum pcix_bridge_inst { - NORTH_A = 0, - NORTH_B = 1, - SOUTH_A = 2, - SOUTH_B = 3, - NO_BRIDGE = 4 -}; - -struct amd8131_dev_info { - int devfn; - enum pcix_bridge_inst inst; - struct pci_dev *dev; - int edac_idx; /* pci device index */ - char *ctl_name; - struct edac_pci_ctl_info *edac_dev; -}; - -/* - * AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC - * Controller, and ATCA-6101 has two AMD8131 chipsets, so there are - * four PCIX Bridges on ATCA-6101 altogether. - * - * These PCIX Bridges share the same PCI Device ID and are all of - * Function Zero, they could be discrimated by their pci_dev->devfn. - * They share the same set of init/check/exit methods, and their - * private structures are collected in the devices[] array. - */ -struct amd8131_info { - u16 err_dev; /* PCI Device ID for AMD8131 APIC*/ - struct amd8131_dev_info *devices; - void (*init)(struct amd8131_dev_info *dev_info); - void (*exit)(struct amd8131_dev_info *dev_info); - void (*check)(struct edac_pci_ctl_info *edac_dev); -}; - -#endif /* _AMD8131_EDAC_H_ */ -