diff mbox series

[v17,01/18] EDAC: Add support for EDAC device features control

Message ID 20241122180416.1932-2-shiju.jose@huawei.com (mailing list archive)
State New
Headers show
Series EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers | expand

Commit Message

Shiju Jose Nov. 22, 2024, 6:03 p.m. UTC
From: Shiju Jose <shiju.jose@huawei.com>

Add generic EDAC device feature controls supporting the registration
of RAS features available in the system. The driver exposes control
attributes for these features to userspace in
/sys/bus/edac/devices/<dev-name>/<ras-feature>/

Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
 Documentation/edac/features.rst |  94 ++++++++++++++++++++++++++++++
 Documentation/edac/index.rst    |  10 ++++
 drivers/edac/edac_device.c      | 100 ++++++++++++++++++++++++++++++++
 include/linux/edac.h            |  28 +++++++++
 4 files changed, 232 insertions(+)
 create mode 100644 Documentation/edac/features.rst
 create mode 100644 Documentation/edac/index.rst
diff mbox series

Patch

diff --git a/Documentation/edac/features.rst b/Documentation/edac/features.rst
new file mode 100644
index 000000000000..e7a63146e708
--- /dev/null
+++ b/Documentation/edac/features.rst
@@ -0,0 +1,94 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================
+Augmenting EDAC for controlling RAS features
+============================================
+
+Copyright (c) 2024 HiSilicon Limited.
+
+:Author:   Shiju Jose <shiju.jose@huawei.com>
+:License:  The GNU Free Documentation License, Version 1.2
+          (dual licensed under the GPL v2)
+:Original Reviewers:
+
+- Written for: 6.13
+
+Introduction
+------------
+The expansion of EDAC for controlling RAS features and exposing features
+control attributes to userspace via sysfs. Some Examples:
+
+* Scrub control
+
+* Error Check Scrub (ECS) control
+
+* ACPI RAS2 features
+
+* Post Package Repair (PPR) control
+
+* Memory Sparing Repair control etc.
+
+High level design is illustrated in the following diagram::
+
+         _______________________________________________
+        |   Userspace - Rasdaemon                       |
+        |  _____________                                |
+        | | RAS CXL mem |      _______________          |
+        | |error handler|---->|               |         |
+        | |_____________|     | RAS dynamic   |         |
+        |  _____________      | scrub, memory |         |
+        | | RAS memory  |---->| repair control|         |
+        | |error handler|     |_______________|         |
+        | |_____________|          |                    |
+        |__________________________|____________________|
+                                   |
+                                   |
+    _______________________________|______________________________
+   |     Kernel EDAC extension for | controlling RAS Features     |
+   | ______________________________|____________________________  |
+   || EDAC Core          Sysfs EDAC| Bus                        | |
+   ||    __________________________|_________     _____________ | |
+   ||   |/sys/bus/edac/devices/<dev>/scrubX/ |   | EDAC device || |
+   ||   |/sys/bus/edac/devices/<dev>/ecsX/   |<->| EDAC MC     || |
+   ||   |/sys/bus/edac/devices/<dev>/repairX |   | EDAC sysfs  || |
+   ||   |____________________________________|   |_____________|| |
+   ||                           EDAC|Bus                        | |
+   ||                               |                           | |
+   ||    __________ Get feature     |      Get feature          | |
+   ||   |          |desc   _________|______ desc  __________    | |
+   ||   |EDAC scrub|<-----| EDAC device    |     |          |   | |
+   ||   |__________|      | driver- RAS    |---->| EDAC mem |   | |
+   ||    __________       | feature control|     | repair   |   | |
+   ||   |          |<-----|________________|     |__________|   | |
+   ||   |EDAC ECS  |    Register RAS|features                   | |
+   ||   |__________|                |                           | |
+   ||         ______________________|_____________              | |
+   ||_________|_______________|__________________|______________| |
+   |   _______|____    _______|_______       ____|__________      |
+   |  |            |  | CXL mem driver|     | Client driver |     |
+   |  | ACPI RAS2  |  | scrub, ECS,   |     | memory repair |     |
+   |  | driver     |  | sparing, PPR  |     | features      |     |
+   |  |____________|  |_______________|     |_______________|     |
+   |        |                 |                    |              |
+   |________|_________________|____________________|______________|
+            |                 |                    |
+    ________|_________________|____________________|______________
+   |     ___|_________________|____________________|_______       |
+   |    |                                                  |      |
+   |    |            Platform HW and Firmware              |      |
+   |    |__________________________________________________|      |
+   |______________________________________________________________|
+
+
+1. EDAC Features components - Create feature specific descriptors.
+For example, EDAC scrub, EDAC ECS, EDAC memory repair in the above
+diagram.
+
+2. EDAC device driver for controlling RAS Features - Get feature's attribute
+descriptors from EDAC RAS feature component and registers device's RAS
+features with EDAC bus and exposes the features control attributes via
+the sysfs EDAC bus. For example, /sys/bus/edac/devices/<dev-name>/<feature>X/
+
+3. RAS dynamic feature controller - Userspace sample modules in rasdaemon for
+dynamic scrub/repair control to issue scrubbing/repair when excess number
+of corrected memory errors are reported in a short span of time.
diff --git a/Documentation/edac/index.rst b/Documentation/edac/index.rst
new file mode 100644
index 000000000000..b6c265a4cffb
--- /dev/null
+++ b/Documentation/edac/index.rst
@@ -0,0 +1,10 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
+==============
+EDAC Subsystem
+==============
+
+.. toctree::
+   :maxdepth: 1
+
+   features
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 621dc2a5d034..9fce46dd7405 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -570,3 +570,103 @@  void edac_device_handle_ue_count(struct edac_device_ctl_info *edac_dev,
 		      block ? block->name : "N/A", count, msg);
 }
 EXPORT_SYMBOL_GPL(edac_device_handle_ue_count);
+
+static void edac_dev_release(struct device *dev)
+{
+	struct edac_dev_feat_ctx *ctx = container_of(dev, struct edac_dev_feat_ctx, dev);
+
+	kfree(ctx->dev.groups);
+	kfree(ctx);
+}
+
+const struct device_type edac_dev_type = {
+	.name = "edac_dev",
+	.release = edac_dev_release,
+};
+
+static void edac_dev_unreg(void *data)
+{
+	device_unregister(data);
+}
+
+/**
+ * edac_dev_register - register device for RAS features with EDAC
+ * @parent: parent device.
+ * @name: parent device's name.
+ * @private: parent driver's data to store in the context if any.
+ * @num_features: number of RAS features to register.
+ * @ras_features: list of RAS features to register.
+ *
+ * Return:
+ *  * %0       - Success.
+ *  * %-EINVAL - Invalid parameters passed.
+ *  * %-ENOMEM - Dynamic memory allocation failed.
+ *
+ */
+int edac_dev_register(struct device *parent, char *name,
+		      void *private, int num_features,
+		      const struct edac_dev_feature *ras_features)
+{
+	const struct attribute_group **ras_attr_groups;
+	struct edac_dev_feat_ctx *ctx;
+	int attr_gcnt = 0;
+	int ret, feat;
+
+	if (!parent || !name || !num_features || !ras_features)
+		return -EINVAL;
+
+	/* Double parse to make space for attributes */
+	for (feat = 0; feat < num_features; feat++) {
+		switch (ras_features[feat].ft_type) {
+		/* Add feature specific code */
+		default:
+			return -EINVAL;
+		}
+	}
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ras_attr_groups = kcalloc(attr_gcnt + 1, sizeof(*ras_attr_groups), GFP_KERNEL);
+	if (!ras_attr_groups) {
+		ret = -ENOMEM;
+		goto ctx_free;
+	}
+
+	attr_gcnt = 0;
+	for (feat = 0; feat < num_features; feat++, ras_features++) {
+		switch (ras_features->ft_type) {
+		/* Add feature specific code */
+		default:
+			ret = -EINVAL;
+			goto groups_free;
+		}
+	}
+
+	ctx->dev.parent = parent;
+	ctx->dev.bus = edac_get_sysfs_subsys();
+	ctx->dev.type = &edac_dev_type;
+	ctx->dev.groups = ras_attr_groups;
+	ctx->private = private;
+	dev_set_drvdata(&ctx->dev, ctx);
+
+	ret = dev_set_name(&ctx->dev, name);
+	if (ret)
+		goto groups_free;
+
+	ret = device_register(&ctx->dev);
+	if (ret) {
+		put_device(&ctx->dev);
+		return ret;
+	}
+
+	return devm_add_action_or_reset(parent, edac_dev_unreg, &ctx->dev);
+
+groups_free:
+	kfree(ras_attr_groups);
+ctx_free:
+	kfree(ctx);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(edac_dev_register);
diff --git a/include/linux/edac.h b/include/linux/edac.h
index b4ee8961e623..521b17113d4d 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -661,4 +661,32 @@  static inline struct dimm_info *edac_get_dimm(struct mem_ctl_info *mci,
 
 	return mci->dimms[index];
 }
+
+#define EDAC_FEAT_NAME_LEN	128
+
+/* RAS feature type */
+enum edac_dev_feat {
+	RAS_FEAT_MAX
+};
+
+/* EDAC device feature information structure */
+struct edac_dev_data {
+	u8 instance;
+	void *private;
+};
+
+struct edac_dev_feat_ctx {
+	struct device dev;
+	void *private;
+};
+
+struct edac_dev_feature {
+	enum edac_dev_feat ft_type;
+	u8 instance;
+	void *ctx;
+};
+
+int edac_dev_register(struct device *parent, char *dev_name,
+		      void *parent_pvt_data, int num_features,
+		      const struct edac_dev_feature *ras_features);
 #endif /* _LINUX_EDAC_H_ */