| Message ID | 1342624871-5947-1-git-send-email-prakash.pm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 07/18/2012 03:21 PM, Manjunathappa, Prakash wrote: > Writing '1' to particular bit of IRQENABLE_CLEAR register disables the > corresponding interrupt on revision 2 LCDC. This register was wrongly > configured to disable all previous enabled interrupts instead of > disabling only palette completion interrupt. Patch fixes it by clearing > only palette completion interrupt bit. > > Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Applied. Thanks, Florian Tobias Schandinat > --- > Resending as my earlier patch seems like not reached fbdev mailing list. > > drivers/video/da8xx-fb.c | 7 ++----- > 1 files changed, 2 insertions(+), 5 deletions(-) > > diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c > index 47118c7..88e98ea 100644 > --- a/drivers/video/da8xx-fb.c > +++ b/drivers/video/da8xx-fb.c > @@ -715,7 +715,6 @@ static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg) > { > struct da8xx_fb_par *par = arg; > u32 stat = lcdc_read(LCD_MASKED_STAT_REG); > - u32 reg_int; > > if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { > lcd_disable_raster(); > @@ -732,10 +731,8 @@ static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg) > > lcdc_write(stat, LCD_MASKED_STAT_REG); > > - /* Disable PL completion inerrupt */ > - reg_int = lcdc_read(LCD_INT_ENABLE_CLR_REG) | > - (LCD_V2_PL_INT_ENA); > - lcdc_write(reg_int, LCD_INT_ENABLE_CLR_REG); > + /* Disable PL completion interrupt */ > + lcdc_write(LCD_V2_PL_INT_ENA, LCD_INT_ENABLE_CLR_REG); > > /* Setup and start data loading mode */ > lcd_blit(LOAD_DATA, par); -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 47118c7..88e98ea 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -715,7 +715,6 @@ static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg) { struct da8xx_fb_par *par = arg; u32 stat = lcdc_read(LCD_MASKED_STAT_REG); - u32 reg_int; if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { lcd_disable_raster(); @@ -732,10 +731,8 @@ static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg) lcdc_write(stat, LCD_MASKED_STAT_REG); - /* Disable PL completion inerrupt */ - reg_int = lcdc_read(LCD_INT_ENABLE_CLR_REG) | - (LCD_V2_PL_INT_ENA); - lcdc_write(reg_int, LCD_INT_ENABLE_CLR_REG); + /* Disable PL completion interrupt */ + lcdc_write(LCD_V2_PL_INT_ENA, LCD_INT_ENABLE_CLR_REG); /* Setup and start data loading mode */ lcd_blit(LOAD_DATA, par);
Writing '1' to particular bit of IRQENABLE_CLEAR register disables the corresponding interrupt on revision 2 LCDC. This register was wrongly configured to disable all previous enabled interrupts instead of disabling only palette completion interrupt. Patch fixes it by clearing only palette completion interrupt bit. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> --- Resending as my earlier patch seems like not reached fbdev mailing list. drivers/video/da8xx-fb.c | 7 ++----- 1 files changed, 2 insertions(+), 5 deletions(-)