diff mbox

[RFC,v3,2/3] pwm_backlight: use power sequences

Message ID 1343390750-3642-3-git-send-email-acourbot@nvidia.com (mailing list archive)
State New, archived
Headers show

Commit Message

Alexandre Courbot July 27, 2012, 12:05 p.m. UTC
Make use of the power sequences specified in the device tree or platform
data, if any.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
 .../bindings/video/backlight/pwm-backlight.txt     |  55 +++++-
 drivers/video/backlight/Kconfig                    |   1 +
 drivers/video/backlight/pwm_bl.c                   | 213 +++++++++++++++------
 include/linux/pwm_backlight.h                      |  18 +-
 4 files changed, 225 insertions(+), 62 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
index 1e4fc72..59abeba 100644
--- a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
+++ b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
@@ -2,7 +2,6 @@  pwm-backlight bindings
 
 Required properties:
   - compatible: "pwm-backlight"
-  - pwms: OF device-tree PWM specification (see PWM binding[0])
   - brightness-levels: Array of distinct brightness levels. Typically these
       are in the range from 0 to 255, but any range starting at 0 will do.
       The actual brightness level (PWM duty cycle) will be interpolated
@@ -10,10 +9,22 @@  Required properties:
       last value in the array represents a 100% duty cycle (brightest).
   - default-brightness-level: the default brightness level (index into the
       array defined by the "brightness-levels" property)
+  - pwms: OF device-tree PWM specification (see PWM binding[0]). Exactly one PWM
+      must be specified
+  - pwm-names: a list of names for the PWM devices specified in the
+      "pwms" property (see PWM binding[0])
+  - power-on-sequence: Power sequence that will bring the backlight on. This
+      sequence must reference the PWM specified in the pwms property by its
+      name. It can also reference extra GPIOs or regulators, and introduce
+      delays between sequence steps
+  - power-off-sequence: Power sequence that will bring the backlight off. This
+      sequence must reference the PWM specified in the pwms property by its
+      name. It can also reference extra GPIOs or regulators, and introduce
+      delays between sequence steps
 
 Optional properties:
-  - pwm-names: a list of names for the PWM devices specified in the
-               "pwms" property (see PWM binding[0])
+  - *-supply: regulators used within a power sequence
+  - *-gpio: GPIOs used within a power sequence
 
 [0]: Documentation/devicetree/bindings/pwm/pwm.txt
 
@@ -21,8 +32,42 @@  Example:
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
+
+		pwms = <&pwm 0 5000000>;
+		pwm-names = "backlight";
+		power-supply = <&backlight_reg>;
+		enable-gpio = <&gpio 6 0>;
+
+		power-on-sequence {
+			regulator@0 {
+				id = "power";
+				enable;
+				post-delay = <10>;
+			};
+			pwm@1 {
+				id = "backlight";
+				enable;
+			};
+			gpio@2 {
+				id = "enable-gpio";
+				enable;
+			};
+		};
+		power-off-sequence {
+			gpio@0 {
+				id = "enable-gpio";
+				disable;
+			};
+			pwm@1 {
+				id = "backlight";
+				disable;
+			};
+			regulator@2 {
+				id = "power";
+				disable;
+				pre-delay = <10>;
+			};
+		};
 	};
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index cf28276..6fb8aa3 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -246,6 +246,7 @@  config BACKLIGHT_CARILLO_RANCH
 config BACKLIGHT_PWM
 	tristate "Generic PWM based Backlight Driver"
 	depends on PWM
+	select POWER_SEQ
 	help
 	  If you have a LCD backlight adjustable by PWM, say Y to enable
 	  this driver.
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 995f016..6e3a49e 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -27,6 +27,12 @@  struct pwm_bl_data {
 	unsigned int		period;
 	unsigned int		lth_brightness;
 	unsigned int		*levels;
+	bool			enabled;
+	power_seq_resources	resources;
+	power_seq		*power_on_seq;
+	power_seq		*power_off_seq;
+
+	/* Legacy callbacks */
 	int			(*notify)(struct device *,
 					  int brightness);
 	void			(*notify_after)(struct device *,
@@ -35,6 +41,34 @@  struct pwm_bl_data {
 	void			(*exit)(struct device *);
 };
 
+static void pwm_backlight_on(struct backlight_device *bl)
+{
+	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+	int ret;
+
+	if (pb->enabled)
+		return;
+
+	if ((ret = power_seq_run(pb->dev, pb->power_on_seq)) < 0)
+		dev_err(&bl->dev, "cannot run power on sequence\n");
+
+	pb->enabled = true;
+}
+
+static void pwm_backlight_off(struct backlight_device *bl)
+{
+	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+	int ret;
+
+	if (!pb->enabled)
+		return;
+
+	if ((ret = power_seq_run(pb->dev, pb->power_off_seq)) < 0)
+		dev_err(&bl->dev, "cannot run power off sequence\n");
+
+	pb->enabled = false;
+}
+
 static int pwm_backlight_update_status(struct backlight_device *bl)
 {
 	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
@@ -51,8 +85,7 @@  static int pwm_backlight_update_status(struct backlight_device *bl)
 		brightness = pb->notify(pb->dev, brightness);
 
 	if (brightness == 0) {
-		pwm_config(pb->pwm, 0, pb->period);
-		pwm_disable(pb->pwm);
+		pwm_backlight_off(bl);
 	} else {
 		int duty_cycle;
 
@@ -66,7 +99,7 @@  static int pwm_backlight_update_status(struct backlight_device *bl)
 		duty_cycle = pb->lth_brightness +
 		     (duty_cycle * (pb->period - pb->lth_brightness) / max);
 		pwm_config(pb->pwm, duty_cycle, pb->period);
-		pwm_enable(pb->pwm);
+		pwm_backlight_on(bl);
 	}
 
 	if (pb->notify_after)
@@ -145,12 +178,16 @@  static int pwm_backlight_parse_dt(struct device *dev,
 		data->max_brightness--;
 	}
 
-	/*
-	 * TODO: Most users of this driver use a number of GPIOs to control
-	 *       backlight power. Support for specifying these needs to be
-	 *       added.
-	 */
+	data->power_on_seq = of_parse_power_seq(dev, of_find_node_by_name(node,
+							"power-on-sequence"));
+	if (IS_ERR(data->power_on_seq))
+		return PTR_ERR(data->power_on_seq);
+	data->power_off_seq = of_parse_power_seq(dev, of_find_node_by_name(node,
+							"power-off-sequence"));
+	if (IS_ERR(data->power_off_seq))
+		return PTR_ERR(data->power_off_seq);
 
+	data->use_power_sequences = true;
 	return 0;
 }
 
@@ -168,73 +205,141 @@  static int pwm_backlight_parse_dt(struct device *dev,
 }
 #endif
 
+/**
+ * Construct the power sequences corresponding to the legacy platform data.
+ */
+static int pwm_backlight_legacy_probe(struct platform_device *pdev,
+				      struct pwm_bl_data *pb)
+{
+	struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct power_seq_resource *res;
+	struct power_seq_step *step;
+
+	pb->pwm = pwm_get(dev, NULL);
+	if (IS_ERR(pb->pwm)) {
+		dev_warn(dev, "unable to request PWM, trying legacy API\n");
+
+		pb->pwm = pwm_request(data->pwm_id, "pwm-backlight");
+		if (IS_ERR(pb->pwm)) {
+			dev_err(dev, "unable to request legacy PWM\n");
+			return PTR_ERR(pb->pwm);
+		}
+		pwm_set_period(pb->pwm, data->pwm_period_ns);
+	}
+
+	pb->notify = data->notify;
+	pb->notify_after = data->notify_after;
+	pb->check_fb = data->check_fb;
+	pb->exit = data->exit;
+	pb->dev = dev;
+
+	/* Now build the resources and sequences corresponding to this PWM */
+	res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+	if (!res) return -ENOMEM;
+	res->type = POWER_SEQ_PWM;
+	res->id = "pwm-backlight";
+	res->pwm = pb->pwm;
+	list_add(&res->list, &pb->resources);
+
+	/* allocate both power on and off sequences at the same time */
+	step = devm_kzalloc(dev, sizeof(*step) * 4, GFP_KERNEL);
+	if (!step) return -ENOMEM;
+	step->resource = res;
+	memcpy(&step[2], &step[0], sizeof(*step));
+	step[0].params.enable = 1;
+	pb->power_on_seq = &step[0];
+	pb->power_off_seq = &step[2];
+
+	return 0;
+}
+
 static int pwm_backlight_probe(struct platform_device *pdev)
 {
 	struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
 	struct platform_pwm_backlight_data defdata;
+	struct power_seq_resource *res;
 	struct backlight_properties props;
 	struct backlight_device *bl;
 	struct pwm_bl_data *pb;
 	unsigned int max;
 	int ret;
 
+	pb = devm_kzalloc(&pdev->dev, sizeof(*pb), GFP_KERNEL);
+	if (!pb) {
+		dev_err(&pdev->dev, "no memory for state\n");
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&pb->resources);
+
+	/* using new interface or device tree */
 	if (!data) {
+		/* build platform data from device tree */
 		ret = pwm_backlight_parse_dt(&pdev->dev, &defdata);
-		if (ret < 0) {
+		if (ret == -EPROBE_DEFER) {
+			return ret;
+		} else if (ret < 0) {
 			dev_err(&pdev->dev, "failed to find platform data\n");
 			return ret;
 		}
-
 		data = &defdata;
 	}
 
-	if (data->init) {
-		ret = data->init(&pdev->dev);
+	if (!data->use_power_sequences) {
+		/* using legacy interface */
+		ret = pwm_backlight_legacy_probe(pdev, pb);
 		if (ret < 0)
 			return ret;
+	} else {
+		/* build sequences and allocate resources from platform data */
+		if (data->power_on_seq) {
+			pb->power_on_seq = power_seq_build(&pdev->dev,
+							   &pb->resources,
+							   data->power_on_seq);
+			if (IS_ERR(pb->power_on_seq))
+				return PTR_ERR(pb->power_on_seq);
+		}
+		if (data->power_off_seq) {
+			pb->power_off_seq = power_seq_build(&pdev->dev,
+							    &pb->resources,
+							   data->power_off_seq);
+			if (IS_ERR(pb->power_off_seq))
+				return PTR_ERR(pb->power_off_seq);
+		}
+
+		/* we must have exactly one PWM for this driver */
+		list_for_each_entry(res, &pb->resources, list) {
+			if (res->type != POWER_SEQ_PWM)
+				continue;
+			if (pb->pwm) {
+				dev_err(&pdev->dev, "more than one PWM used\n");
+				return -EINVAL;
+			}
+			/* keep the pwm at hand */
+			pb->pwm = res->pwm;
+		}
 	}
 
-	pb = devm_kzalloc(&pdev->dev, sizeof(*pb), GFP_KERNEL);
-	if (!pb) {
-		dev_err(&pdev->dev, "no memory for state\n");
-		ret = -ENOMEM;
-		goto err_alloc;
+	/* from here we should have a PWM */
+	if (!pb->pwm) {
+		dev_err(&pdev->dev, "no PWM defined!\n");
+		return -EINVAL;
+	}
+
+	if (data->init) {
+		ret = data->init(&pdev->dev);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (data->levels) {
 		max = data->levels[data->max_brightness];
 		pb->levels = data->levels;
-	} else
+	} else {
 		max = data->max_brightness;
-
-	pb->notify = data->notify;
-	pb->notify_after = data->notify_after;
-	pb->check_fb = data->check_fb;
-	pb->exit = data->exit;
-	pb->dev = &pdev->dev;
-
-	pb->pwm = pwm_get(&pdev->dev, NULL);
-	if (IS_ERR(pb->pwm)) {
-		dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
-
-		pb->pwm = pwm_request(data->pwm_id, "pwm-backlight");
-		if (IS_ERR(pb->pwm)) {
-			dev_err(&pdev->dev, "unable to request legacy PWM\n");
-			ret = PTR_ERR(pb->pwm);
-			goto err_alloc;
-		}
 	}
 
-	dev_dbg(&pdev->dev, "got pwm for backlight\n");
-
-	/*
-	 * The DT case will set the pwm_period_ns field to 0 and store the
-	 * period, parsed from the DT, in the PWM device. For the non-DT case,
-	 * set the period from platform data.
-	 */
-	if (data->pwm_period_ns > 0)
-		pwm_set_period(pb->pwm, data->pwm_period_ns);
-
 	pb->period = pwm_get_period(pb->pwm);
 	pb->lth_brightness = data->lth_brightness * (pb->period / max);
 
@@ -246,20 +351,20 @@  static int pwm_backlight_probe(struct platform_device *pdev)
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
 		ret = PTR_ERR(bl);
-		goto err_bl;
+		goto err;
 	}
 
 	bl->props.brightness = data->dft_brightness;
 	backlight_update_status(bl);
 
 	platform_set_drvdata(pdev, bl);
+
 	return 0;
 
-err_bl:
-	pwm_put(pb->pwm);
-err_alloc:
+err:
 	if (data->exit)
 		data->exit(&pdev->dev);
+	power_seq_free_resources(&pb->resources);
 	return ret;
 }
 
@@ -269,9 +374,9 @@  static int pwm_backlight_remove(struct platform_device *pdev)
 	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
 
 	backlight_device_unregister(bl);
-	pwm_config(pb->pwm, 0, pb->period);
-	pwm_disable(pb->pwm);
-	pwm_put(pb->pwm);
+	pwm_backlight_off(bl);
+	power_seq_free_resources(&pb->resources);
+
 	if (pb->exit)
 		pb->exit(&pdev->dev);
 	return 0;
@@ -285,8 +390,7 @@  static int pwm_backlight_suspend(struct device *dev)
 
 	if (pb->notify)
 		pb->notify(pb->dev, 0);
-	pwm_config(pb->pwm, 0, pb->period);
-	pwm_disable(pb->pwm);
+	pwm_backlight_off(bl);
 	if (pb->notify_after)
 		pb->notify_after(pb->dev, 0);
 	return 0;
@@ -323,4 +427,3 @@  module_platform_driver(pwm_backlight_driver);
 MODULE_DESCRIPTION("PWM based Backlight Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:pwm-backlight");
-
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
index 56f4a86..3e8bd2c 100644
--- a/include/linux/pwm_backlight.h
+++ b/include/linux/pwm_backlight.h
@@ -5,14 +5,28 @@ 
 #define __LINUX_PWM_BACKLIGHT_H
 
 #include <linux/backlight.h>
+#include <linux/power_seq.h>
 
 struct platform_pwm_backlight_data {
-	int pwm_id;
 	unsigned int max_brightness;
 	unsigned int dft_brightness;
 	unsigned int lth_brightness;
-	unsigned int pwm_period_ns;
 	unsigned int *levels;
+	/* Set this to true otherwise the legacy interface will be used */
+	bool use_power_sequences;
+	/*
+	 * New interface - arrays of steps terminated by a STOP instance, or
+	 * NULL if unused.
+	 */
+	struct platform_power_seq_step *power_on_seq;
+	struct platform_power_seq_step *power_off_seq;
+	/*
+	 * Legacy interface - single PWM and callback methods to control
+	 * the power sequence. pwm_id and pwm_period_ns need only be specified
+	 * if get_pwm(dev, NULL) will return NULL.
+	 */
+	int pwm_id;
+	unsigned int pwm_period_ns;
 	int (*init)(struct device *dev);
 	int (*notify)(struct device *dev, int brightness);
 	void (*notify_after)(struct device *dev, int brightness);