@@ -20,7 +20,6 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/backlight.h>
#include <linux/fb.h>
#include <linux/err.h>
#include <linux/slab.h>
@@ -28,7 +27,6 @@
#include <video/omapdss.h>
struct sharp_data {
- struct backlight_device *bl;
};
static struct omap_video_timings sharp_ls_timings = {
@@ -52,45 +50,10 @@ static struct omap_video_timings sharp_ls_timings = {
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
};
-static int sharp_ls_bl_update_status(struct backlight_device *bl)
-{
- struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev);
- int level;
-
- if (!dssdev->set_backlight)
- return -EINVAL;
-
- if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
- bl->props.power == FB_BLANK_UNBLANK)
- level = bl->props.brightness;
- else
- level = 0;
-
- return dssdev->set_backlight(dssdev, level);
-}
-
-static int sharp_ls_bl_get_brightness(struct backlight_device *bl)
-{
- if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
- bl->props.power == FB_BLANK_UNBLANK)
- return bl->props.brightness;
-
- return 0;
-}
-
-static const struct backlight_ops sharp_ls_bl_ops = {
- .get_brightness = sharp_ls_bl_get_brightness,
- .update_status = sharp_ls_bl_update_status,
-};
-
-
static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
{
- struct backlight_properties props;
- struct backlight_device *bl;
struct sharp_data *sd;
- int r;
dssdev->panel.timings = sharp_ls_timings;
@@ -100,37 +63,12 @@ static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
dev_set_drvdata(&dssdev->dev, sd);
- memset(&props, 0, sizeof(struct backlight_properties));
- props.max_brightness = dssdev->max_backlight_level;
- props.type = BACKLIGHT_RAW;
-
- bl = backlight_device_register("sharp-ls", &dssdev->dev, dssdev,
- &sharp_ls_bl_ops, &props);
- if (IS_ERR(bl)) {
- r = PTR_ERR(bl);
- kfree(sd);
- return r;
- }
- sd->bl = bl;
-
- bl->props.fb_blank = FB_BLANK_UNBLANK;
- bl->props.power = FB_BLANK_UNBLANK;
- bl->props.brightness = dssdev->max_backlight_level;
- r = sharp_ls_bl_update_status(bl);
- if (r < 0)
- dev_err(&dssdev->dev, "failed to set lcd brightness\n");
-
return 0;
}
static void __exit sharp_ls_panel_remove(struct omap_dss_device *dssdev)
{
struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
- struct backlight_device *bl = sd->bl;
-
- bl->props.power = FB_BLANK_POWERDOWN;
- sharp_ls_bl_update_status(bl);
- backlight_device_unregister(bl);
kfree(sd);
}