diff mbox

[3/4] fb: vt8500: Require a device clock for wm8505fb driver

Message ID 1368868514-18975-4-git-send-email-linux@prisktech.co.nz (mailing list archive)
State New, archived
Headers show

Commit Message

Tony Prisk May 18, 2013, 9:15 a.m. UTC
The wm8505fb driver requires a clock to work properly. Without a clock,
the driver can only initialize the display resolution that was set in
uboot.
This patch updates the driver to get and use a clock, and updates
the devicetree documentation to indicate the requirement for a clock.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 .../devicetree/bindings/video/wm,wm8505-fb.txt     |    4 ++-
 drivers/video/wm8505fb.c                           |   30 +++++++++++++++++---
 2 files changed, 29 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
index 0bcadb2..601416c 100644
--- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -5,6 +5,7 @@  Required properties:
 - compatible : "wm,wm8505-fb"
 - reg : Should contain 1 register ranges(address and length)
 - bits-per-pixel : bit depth of framebuffer (16 or 32)
+- clocks : phandle to DVO clock
 
 Required subnodes:
 - display-timings: see display-timing.txt for information
@@ -15,11 +16,12 @@  Example:
 		compatible = "wm,wm8505-fb";
 		reg = <0xd8051700 0x200>;
 		bits-per-pixel = <16>;
+		clocks = <&clkdvo>;
 
 		display-timings {
 			native-mode = <&timing0>;
 			timing0: 800x480 {
-				clock-frequency = <0>; /* unused but required */
+				clock-frequency = <30000000>;
 				hactive = <800>;
 				vactive = <480>;
 				hfront-porch = <40>;
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 167a9e2..f8bffc2 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -14,6 +14,7 @@ 
  * GNU General Public License for more details.
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/fb.h>
@@ -130,9 +131,11 @@ 
 #define to_wm8505fb_info(__info) container_of(__info, \
 						struct wm8505fb_info, fb)
 struct wm8505fb_info {
-	struct fb_info		fb;
-	void __iomem		*regbase;
-	unsigned int		contrast;
+	struct fb_info fb;
+	void __iomem *regbase;
+	unsigned int contrast;
+	struct device *dev;
+	struct clk *clk_dvo;
 };
 
 
@@ -210,6 +213,13 @@  static int wm8505fb_set_par(struct fb_info *info)
 	if (!fbi)
 		return -EINVAL;
 
+	if (info->var.pixclock == 0) {
+		dev_err(fbi->dev, "requested pixclock = 0\n");
+		return -EINVAL;
+	}
+
+	clk_set_rate(fbi->clk_dvo, PICOS2KHZ(info->var.pixclock)*1000);
+
 	if (info->var.bits_per_pixel == 32) {
 		info->var.red.offset = 16;
 		info->var.red.length = 8;
@@ -369,6 +379,8 @@  static int wm8505fb_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	fbi->dev = &pdev->dev;
+
 	strcpy(fbi->fb.fix.id, DRIVER_NAME);
 
 	fbi->fb.fix.type	= FB_TYPE_PACKED_PIXELS;
@@ -408,6 +420,14 @@  static int wm8505fb_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	fbi->clk_dvo = of_clk_get(pdev->dev.of_node, 0);
+	if (IS_ERR(fbi->clk_dvo)) {
+		dev_err(&pdev->dev, "Error retrieving clock\n");
+		return PTR_ERR(fbi->clk_dvo);
+	}
+
+	clk_prepare_enable(fbi->clk_dvo);
+
 	fb_videomode_to_var(&fbi->fb.var, &mode);
 
 	fbi->fb.var.nonstd		= 0;
@@ -421,7 +441,7 @@  static int wm8505fb_probe(struct platform_device *pdev)
 	fb_mem_virt = dmam_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
 				GFP_KERNEL);
 	if (!fb_mem_virt) {
-		pr_err("%s: Failed to allocate framebuffer\n", __func__);
+		dev_err(&pdev->dev, "Failed to allocate framebuffer\n");
 		return -ENOMEM;
 	}
 
@@ -480,6 +500,8 @@  static int wm8505fb_remove(struct platform_device *pdev)
 
 	unregister_framebuffer(&fbi->fb);
 
+	clk_disable_unprepare(fbi->clk_dvo);
+
 	writel(0, fbi->regbase);
 
 	if (fbi->fb.cmap.len)