diff mbox

[03/27] OMAPDSS: add platform data structs for new panel drivers

Message ID 1369906580-27585-4-git-send-email-tomi.valkeinen@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tomi Valkeinen May 30, 2013, 9:35 a.m. UTC
With the new DSS device model, we'll have new panel and encoder drivers.
This patch adds the platform data structs for all the new drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 include/video/omap-panel-data.h | 150 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 150 insertions(+)
diff mbox

Patch

diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
index 0c3b46d..317ee36 100644
--- a/include/video/omap-panel-data.h
+++ b/include/video/omap-panel-data.h
@@ -27,6 +27,8 @@ 
 #ifndef __OMAP_PANEL_DATA_H
 #define __OMAP_PANEL_DATA_H
 
+#include <video/omapdss.h>
+
 struct omap_dss_device;
 
 /**
@@ -147,4 +149,152 @@  struct panel_tpo_td043_data {
 	int nreset_gpio;
 };
 
+/**
+ * panel_dpi platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @display_timing: timings for this panel
+ * @backlight_gpio: gpio to enable/disable the backlight (or -1)
+ * @enable_gpio: gpio to enable/disable the panel (or -1)
+ */
+struct panel_dpi_platform_data {
+	const char *name;
+	const char *source;
+
+	int data_lines;
+
+	const struct display_timing *display_timing;
+
+	int backlight_gpio;
+	int enable_gpio;
+};
+
+/**
+ * panel_dsicm platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @reset_gpio: gpio to reset the panel (or -1)
+ * @use_ext_te: use external TE GPIO
+ * @ext_te_gpio: external TE GPIO
+ * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
+ * @use_dsi_backlight: true if panel uses DSI command to control backlight
+ * @pin_config: DSI pin configuration
+ */
+struct panel_dsicm_platform_data {
+	const char *name;
+	const char *source;
+
+	int reset_gpio;
+
+	bool use_ext_te;
+	int ext_te_gpio;
+
+	unsigned ulps_timeout;
+
+	bool use_dsi_backlight;
+
+	struct omap_dsi_pin_config pin_config;
+};
+
+/**
+ * panel_acx565akm platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @reset_gpio: gpio to reset the panel (or -1)
+ * @datapairs: number of SDI datapairs
+ */
+struct panel_acx565akm_platform_data {
+	const char *name;
+	const char *source;
+
+	int reset_gpio;
+
+	int datapairs;
+};
+
+/**
+ * panel_lb035q02 platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @backlight_gpio: gpio to enable/disable the backlight (or -1)
+ * @enable_gpio: gpio to enable/disable the panel (or -1)
+ */
+struct panel_lb035q02_platform_data {
+	const char *name;
+	const char *source;
+
+	int data_lines;
+
+	int backlight_gpio;
+	int enable_gpio;
+};
+
+/**
+ * connector_dvi platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @i2c_bus_num: i2c bus number to be used for reading EDID
+ */
+struct connector_dvi_platform_data {
+	const char *name;
+	const char *source;
+	int i2c_bus_num;
+};
+
+/**
+ * connector_hdmi platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ */
+struct connector_hdmi_platform_data {
+	const char *name;
+	const char *source;
+};
+
+/**
+ * connector_atv platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @connector_type: composite/svideo
+ * @invert_polarity: invert signal polarity
+ */
+struct connector_atv_platform_data {
+	const char *name;
+	const char *source;
+
+	enum omap_dss_venc_type connector_type;
+	bool invert_polarity;
+};
+
+/**
+ * encoder_tfp410 platform data
+ * @name: name for this display entity
+ * @power_down_gpio: gpio number for PD pin (or -1 if not available)
+ * @data_lines: number of DPI datalines
+ */
+struct encoder_tfp410_platform_data {
+	const char *name;
+	const char *source;
+	int power_down_gpio;
+	int data_lines;
+};
+
+/**
+ * encoder_tpd12s015 platform data
+ * @name: name for this display entity
+ * @ct_cp_hpd_gpio: CT_CP_HPD gpio number
+ * @ls_oe_gpio: LS_OE gpio number
+ * @hpd_gpio: HPD gpio number
+ */
+struct encoder_tpd12s015_platform_data {
+	const char *name;
+	const char *source;
+
+	int ct_cp_hpd_gpio;
+	int ls_oe_gpio;
+	int hpd_gpio;
+};
+
 #endif /* __OMAP_PANEL_DATA_H */