@@ -71,6 +71,18 @@
#define HX8357_SET_POWER_NORMAL 0xd2
#define HX8357_SET_PANEL_RELATED 0xe9
+#define HX8369_SET_DISPLAY_BRIGHTNESS 0x51
+#define HX8369_WRITE_CABC_DISPLAY_VALUE 0x53
+#define HX8369_WRITE_CABC_BRIGHT_CTRL 0x55
+#define HX8369_WRITE_CABC_MIN_BRIGHTNESS 0x5e
+#define HX8369_SET_POWER 0xb1
+#define HX8369_SET_DISPLAY_MODE 0xb2
+#define HX8369_SET_DISPLAY_WAVEFORM_CYC 0xb4
+#define HX8369_SET_VCOM 0xb6
+#define HX8369_SET_EXTENSION_COMMAND 0xb9
+#define HX8369_SET_GIP 0xd5
+#define HX8369_SET_GAMMA_CURVE_RELATED 0xe0
+
struct hx8357_data {
unsigned im_pins[HX8357_NUM_IM_PINS];
unsigned reset;
@@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
};
+static u8 hx8369_seq_write_CABC_min_brightness[] = {
+ HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
+};
+
+static u8 hx8369_seq_write_CABC_control[] = {
+ HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
+};
+
+static u8 hx8369_seq_set_display_brightness[] = {
+ HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
+};
+
+static u8 hx8369_seq_write_CABC_control_setting[] = {
+ HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
+};
+
+static u8 hx8369_seq_extension_command[] = {
+ HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
+};
+
+static u8 hx8369_seq_display_related[] = {
+ HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
+ 0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x01,
+};
+
+static u8 hx8369_seq_panel_waveform_cycle[] = {
+ HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
+};
+
+static u8 hx8369_seq_set_address_mode[] = {
+ HX8357_SET_ADDRESS_MODE, 0x00,
+};
+
+static u8 hx8369_seq_vcom[] = {
+ HX8369_SET_VCOM, 0x3e, 0x3e,
+};
+
+static u8 hx8369_seq_gip[] = {
+ HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
+ 0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
+ 0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
+};
+
+static u8 hx8369_seq_power[] = {
+ HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
+ 0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
+};
+
+static u8 hx8369_seq_gamma_curve_related[] = {
+ HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
+ 0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+ 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
+ 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+};
+
static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
u8 *txbuf, u16 txlen,
u8 *rxbuf, u16 rxlen)
@@ -242,6 +309,18 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
return 0;
}
+static void hx8357_lcd_reset(struct lcd_device *lcdev)
+{
+ struct hx8357_data *lcd = lcd_get_data(lcdev);
+
+ gpio_set_value(lcd->reset, 1);
+ usleep_range(10000, 12000);
+ gpio_set_value(lcd->reset, 0);
+ usleep_range(10000, 12000);
+ gpio_set_value(lcd->reset, 1);
+ msleep(120);
+}
+
static int hx8357_lcd_init(struct lcd_device *lcdev)
{
struct hx8357_data *lcd = lcd_get_data(lcdev);
@@ -257,14 +336,6 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
gpio_set_value_cansleep(lcd->im_pins[2], 1);
}
- /* Reset the screen */
- gpio_set_value(lcd->reset, 1);
- usleep_range(10000, 12000);
- gpio_set_value(lcd->reset, 0);
- usleep_range(10000, 12000);
- gpio_set_value(lcd->reset, 1);
- msleep(120);
-
ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
ARRAY_SIZE(hx8357_seq_power));
if (ret < 0)
@@ -359,6 +430,94 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
return 0;
}
+static int hx8369_lcd_init(struct lcd_device *lcdev)
+{
+ int ret;
+
+ ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
+ ARRAY_SIZE(hx8369_seq_extension_command));
+ if (ret < 0)
+ return ret;
+ usleep_range(10000, 12000);
+
+ ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
+ ARRAY_SIZE(hx8369_seq_display_related));
+ if (ret < 0)
+ return ret;
+
+ ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
+ ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
+ if (ret < 0)
+ return ret;
+
+ ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
+ ARRAY_SIZE(hx8369_seq_set_address_mode));
+ if (ret < 0)
+ return ret;
+
+ ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
+ ARRAY_SIZE(hx8369_seq_vcom));
+ if (ret < 0)
+ return ret;
+
+ ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
+ ARRAY_SIZE(hx8369_seq_gip));
+ if (ret < 0)
+ return ret;
+
+ ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
+ ARRAY_SIZE(hx8369_seq_power));
+ if (ret < 0)
+ return ret;
+
+ ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+ if (ret < 0)
+ return ret;
+
+ msleep(120);
+
+ ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
+ ARRAY_SIZE(hx8369_seq_gamma_curve_related));
+ if (ret < 0)
+ return ret;
+
+ ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+ if (ret < 0)
+ return ret;
+ usleep_range(1000, 1200);
+
+ ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
+ ARRAY_SIZE(hx8369_seq_write_CABC_control));
+ if (ret < 0)
+ return ret;
+ usleep_range(10000, 12000);
+
+ ret = hx8357_spi_write_array(lcdev,
+ hx8369_seq_write_CABC_control_setting,
+ ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
+ if (ret < 0)
+ return ret;
+
+ ret = hx8357_spi_write_array(lcdev,
+ hx8369_seq_write_CABC_min_brightness,
+ ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
+ if (ret < 0)
+ return ret;
+ usleep_range(10000, 12000);
+
+ ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
+ ARRAY_SIZE(hx8369_seq_set_display_brightness));
+ if (ret < 0)
+ return ret;
+
+ ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
+ if (ret < 0)
+ return ret;
+ msleep(100);
+
+ return 0;
+}
+
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
static int hx8357_set_power(struct lcd_device *lcdev, int power)
@@ -391,10 +550,24 @@ static struct lcd_ops hx8357_ops = {
.get_power = hx8357_get_power,
};
+static const struct of_device_id hx8357_dt_ids[] = {
+ {
+ .compatible = "himax,hx8357",
+ .data = hx8357_lcd_init,
+ },
+ {
+ .compatible = "himax,hx8369",
+ .data = hx8369_lcd_init,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
+
static int hx8357_probe(struct spi_device *spi)
{
struct lcd_device *lcdev;
struct hx8357_data *lcd;
+ const struct of_device_id *match;
int i, ret;
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
@@ -411,6 +584,10 @@ static int hx8357_probe(struct spi_device *spi)
lcd->spi = spi;
+ match = of_match_device(hx8357_dt_ids, &spi->dev);
+ if (!match || !match->data)
+ return -EINVAL;
+
lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
if (!gpio_is_valid(lcd->reset)) {
dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
@@ -461,7 +638,9 @@ static int hx8357_probe(struct spi_device *spi)
}
spi_set_drvdata(spi, lcdev);
- ret = hx8357_lcd_init(lcdev);
+ hx8357_lcd_reset(lcdev);
+
+ ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
if (ret) {
dev_err(&spi->dev, "Couldn't initialize panel\n");
goto init_error;
@@ -484,12 +663,6 @@ static int hx8357_remove(struct spi_device *spi)
return 0;
}
-static const struct of_device_id hx8357_dt_ids[] = {
- { .compatible = "himax,hx8357" },
- {},
-};
-MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
-
static struct spi_driver hx8357_driver = {
.probe = hx8357_probe,
.remove = hx8357_remove,
Add support for the Himax HX8369 controller as it is quite similar to the hx8357. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- changes since v1: - use the data element of of_device_id to select the correct initialization function drivers/video/backlight/hx8357.c | 203 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 188 insertions(+), 15 deletions(-)