| Message ID | 1380396467-29278-3-git-send-email-s.nawrocki@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
(adding missing devicetree mailing list at Cc) On 09/28/2013 09:27 PM, Sylwester Nawrocki wrote: > Add a PHY provider driver for the Samsung S5P/Exynos SoC MIPI CSI-2 > receiver and MIPI DSI transmitter DPHYs. > > Signed-off-by: Sylwester Nawrocki<s.nawrocki@samsung.com> > Signed-off-by: Kyungmin Park<kyungmin.park@samsung.com> > --- > Changes since v4: > - updated to latest version of the PHY framework - removed PHY > labels. > > The individual driver symbols in drivers/phy/Kconfig should > presumably be prefixed with, e.g. PHY_. This is something that > perhaps could be done as a follow up patch. > --- > .../devicetree/bindings/phy/samsung-phy.txt | 14 ++ > drivers/phy/Kconfig | 6 + > drivers/phy/Makefile | 7 +- > drivers/phy/phy-exynos-mipi-video.c | 176 ++++++++++++++++++++ > 4 files changed, 200 insertions(+), 3 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt > create mode 100644 drivers/phy/phy-exynos-mipi-video.c > > diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt > new file mode 100644 > index 0000000..5ff208c > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt > @@ -0,0 +1,14 @@ > +Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY > +------------------------------------------------- > + > +Required properties: > +- compatible : should be "samsung,s5pv210-mipi-video-phy"; > +- reg : offset and length of the MIPI DPHY register set; > +- #phy-cells : from the generic phy bindings, must be 1; > + > +For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in > +the PHY specifier identifies the PHY and its meaning is as follows: > + 0 - MIPI CSIS 0, > + 1 - MIPI DSIM 0, > + 2 - MIPI CSIS 1, > + 3 - MIPI DSIM 1. > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index ac239ac..0062d7e 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -15,6 +15,12 @@ config GENERIC_PHY > phy users can obtain reference to the PHY. All the users of this > framework should select this config. > > +config PHY_EXYNOS_MIPI_VIDEO > + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" > + help > + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P > + and EXYNOS SoCs. > + > config OMAP_USB2 > tristate "OMAP USB2 PHY Driver" > depends on ARCH_OMAP2PLUS > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 0dd8a98..6344053 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -2,6 +2,7 @@ > # Makefile for the phy drivers. > # > > -obj-$(CONFIG_GENERIC_PHY) += phy-core.o > -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > +obj-$(CONFIG_GENERIC_PHY) += phy-core.o > +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c > new file mode 100644 > index 0000000..b73b86a > --- /dev/null > +++ b/drivers/phy/phy-exynos-mipi-video.c > @@ -0,0 +1,176 @@ > +/* > + * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver > + * > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > + * Author: Sylwester Nawrocki<s.nawrocki@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include<linux/io.h> > +#include<linux/kernel.h> > +#include<linux/module.h> > +#include<linux/of.h> > +#include<linux/of_address.h> > +#include<linux/phy/phy.h> > +#include<linux/platform_device.h> > +#include<linux/spinlock.h> > + > +/* MIPI_PHYn_CONTROL register offset: n = 0..1 */ > +#define EXYNOS_MIPI_PHY_CONTROL(n) ((n) * 4) > +#define EXYNOS_MIPI_PHY_ENABLE (1<< 0) > +#define EXYNOS_MIPI_PHY_SRESETN (1<< 1) > +#define EXYNOS_MIPI_PHY_MRESETN (1<< 2) > +#define EXYNOS_MIPI_PHY_RESET_MASK (3<< 1) > + > +enum exynos_mipi_phy_id { > + EXYNOS_MIPI_PHY_ID_CSIS0, > + EXYNOS_MIPI_PHY_ID_DSIM0, > + EXYNOS_MIPI_PHY_ID_CSIS1, > + EXYNOS_MIPI_PHY_ID_DSIM1, > + EXYNOS_MIPI_PHYS_NUM > +}; > + > +#define is_mipi_dsim_phy_id(id) \ > + ((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1) > + > +struct exynos_mipi_video_phy { > + spinlock_t slock; > + struct video_phy_desc { > + struct phy *phy; > + unsigned int index; > + } phys[EXYNOS_MIPI_PHYS_NUM]; > + void __iomem *regs; > +}; > + > +static int __set_phy_state(struct exynos_mipi_video_phy *state, > + enum exynos_mipi_phy_id id, unsigned int on) > +{ > + void __iomem *addr; > + u32 reg, reset; > + > + addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2); > + > + if (is_mipi_dsim_phy_id(id)) > + reset = EXYNOS_MIPI_PHY_MRESETN; > + else > + reset = EXYNOS_MIPI_PHY_SRESETN; > + > + spin_lock(&state->slock); > + reg = readl(addr); > + if (on) > + reg |= reset; > + else > + reg&= ~reset; > + writel(reg, addr); > + > + /* Clear ENABLE bit only if MRESETN, SRESETN bits are not set. */ > + if (on) > + reg |= EXYNOS_MIPI_PHY_ENABLE; > + else if (!(reg& EXYNOS_MIPI_PHY_RESET_MASK)) > + reg&= ~EXYNOS_MIPI_PHY_ENABLE; > + > + writel(reg, addr); > + spin_unlock(&state->slock); > + return 0; > +} > + > +#define to_mipi_video_phy(desc) \ > + container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]); > + > +static int exynos_mipi_video_phy_power_on(struct phy *phy) > +{ > + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); > + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); > + > + return __set_phy_state(state, phy_desc->index, 1); > +} > + > +static int exynos_mipi_video_phy_power_off(struct phy *phy) > +{ > + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); > + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); > + > + return __set_phy_state(state, phy_desc->index, 1); > +} > + > +static struct phy *exynos_mipi_video_phy_xlate(struct device *dev, > + struct of_phandle_args *args) > +{ > + struct exynos_mipi_video_phy *state = dev_get_drvdata(dev); > + > + if (WARN_ON(args->args[0]> EXYNOS_MIPI_PHYS_NUM)) > + return ERR_PTR(-ENODEV); > + > + return state->phys[args->args[0]].phy; > +} > + > +static struct phy_ops exynos_mipi_video_phy_ops = { > + .power_on = exynos_mipi_video_phy_power_on, > + .power_off = exynos_mipi_video_phy_power_off, > + .owner = THIS_MODULE, > +}; > + > +static int exynos_mipi_video_phy_probe(struct platform_device *pdev) > +{ > + struct exynos_mipi_video_phy *state; > + struct device *dev =&pdev->dev; > + struct resource *res; > + struct phy_provider *phy_provider; > + unsigned int i; > + > + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); > + if (!state) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + > + state->regs = devm_ioremap_resource(dev, res); > + if (IS_ERR(state->regs)) > + return PTR_ERR(state->regs); > + > + dev_set_drvdata(dev, state); > + spin_lock_init(&state->slock); > + > + phy_provider = devm_of_phy_provider_register(dev, > + exynos_mipi_video_phy_xlate); > + if (IS_ERR(phy_provider)) > + return PTR_ERR(phy_provider); > + > + for (i = 0; i< EXYNOS_MIPI_PHYS_NUM; i++) { > + struct phy *phy = devm_phy_create(dev, > + &exynos_mipi_video_phy_ops, NULL); > + if (IS_ERR(phy)) { > + dev_err(dev, "failed to create PHY %d\n", i); > + return PTR_ERR(phy); > + } > + > + state->phys[i].phy = phy; > + state->phys[i].index = i; > + phy_set_drvdata(phy,&state->phys[i]); > + } > + > + return 0; > +} > + > +static const struct of_device_id exynos_mipi_video_phy_of_match[] = { > + { .compatible = "samsung,s5pv210-mipi-video-phy" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match); > + > +static struct platform_driver exynos_mipi_video_phy_driver = { > + .probe = exynos_mipi_video_phy_probe, > + .driver = { > + .of_match_table = exynos_mipi_video_phy_of_match, > + .name = "exynos-mipi-video-phy", > + .owner = THIS_MODULE, > + } > +}; > +module_platform_driver(exynos_mipi_video_phy_driver); > + > +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver"); > +MODULE_AUTHOR("Sylwester Nawrocki<s.nawrocki@samsung.com>"); > +MODULE_LICENSE("GPL v2"); -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt new file mode 100644 index 0000000..5ff208c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -0,0 +1,14 @@ +Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY +------------------------------------------------- + +Required properties: +- compatible : should be "samsung,s5pv210-mipi-video-phy"; +- reg : offset and length of the MIPI DPHY register set; +- #phy-cells : from the generic phy bindings, must be 1; + +For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in +the PHY specifier identifies the PHY and its meaning is as follows: + 0 - MIPI CSIS 0, + 1 - MIPI DSIM 0, + 2 - MIPI CSIS 1, + 3 - MIPI DSIM 1. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index ac239ac..0062d7e 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,6 +15,12 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. +config PHY_EXYNOS_MIPI_VIDEO + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" + help + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P + and EXYNOS SoCs. + config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 0dd8a98..6344053 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -2,6 +2,7 @@ # Makefile for the phy drivers. # -obj-$(CONFIG_GENERIC_PHY) += phy-core.o -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o +obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c new file mode 100644 index 0000000..b73b86a --- /dev/null +++ b/drivers/phy/phy-exynos-mipi-video.c @@ -0,0 +1,176 @@ +/* + * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +/* MIPI_PHYn_CONTROL register offset: n = 0..1 */ +#define EXYNOS_MIPI_PHY_CONTROL(n) ((n) * 4) +#define EXYNOS_MIPI_PHY_ENABLE (1 << 0) +#define EXYNOS_MIPI_PHY_SRESETN (1 << 1) +#define EXYNOS_MIPI_PHY_MRESETN (1 << 2) +#define EXYNOS_MIPI_PHY_RESET_MASK (3 << 1) + +enum exynos_mipi_phy_id { + EXYNOS_MIPI_PHY_ID_CSIS0, + EXYNOS_MIPI_PHY_ID_DSIM0, + EXYNOS_MIPI_PHY_ID_CSIS1, + EXYNOS_MIPI_PHY_ID_DSIM1, + EXYNOS_MIPI_PHYS_NUM +}; + +#define is_mipi_dsim_phy_id(id) \ + ((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1) + +struct exynos_mipi_video_phy { + spinlock_t slock; + struct video_phy_desc { + struct phy *phy; + unsigned int index; + } phys[EXYNOS_MIPI_PHYS_NUM]; + void __iomem *regs; +}; + +static int __set_phy_state(struct exynos_mipi_video_phy *state, + enum exynos_mipi_phy_id id, unsigned int on) +{ + void __iomem *addr; + u32 reg, reset; + + addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2); + + if (is_mipi_dsim_phy_id(id)) + reset = EXYNOS_MIPI_PHY_MRESETN; + else + reset = EXYNOS_MIPI_PHY_SRESETN; + + spin_lock(&state->slock); + reg = readl(addr); + if (on) + reg |= reset; + else + reg &= ~reset; + writel(reg, addr); + + /* Clear ENABLE bit only if MRESETN, SRESETN bits are not set. */ + if (on) + reg |= EXYNOS_MIPI_PHY_ENABLE; + else if (!(reg & EXYNOS_MIPI_PHY_RESET_MASK)) + reg &= ~EXYNOS_MIPI_PHY_ENABLE; + + writel(reg, addr); + spin_unlock(&state->slock); + return 0; +} + +#define to_mipi_video_phy(desc) \ + container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]); + +static int exynos_mipi_video_phy_power_on(struct phy *phy) +{ + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); + + return __set_phy_state(state, phy_desc->index, 1); +} + +static int exynos_mipi_video_phy_power_off(struct phy *phy) +{ + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); + + return __set_phy_state(state, phy_desc->index, 1); +} + +static struct phy *exynos_mipi_video_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct exynos_mipi_video_phy *state = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] > EXYNOS_MIPI_PHYS_NUM)) + return ERR_PTR(-ENODEV); + + return state->phys[args->args[0]].phy; +} + +static struct phy_ops exynos_mipi_video_phy_ops = { + .power_on = exynos_mipi_video_phy_power_on, + .power_off = exynos_mipi_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_mipi_video_phy_probe(struct platform_device *pdev) +{ + struct exynos_mipi_video_phy *state; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + unsigned int i; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + state->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(state->regs)) + return PTR_ERR(state->regs); + + dev_set_drvdata(dev, state); + spin_lock_init(&state->slock); + + phy_provider = devm_of_phy_provider_register(dev, + exynos_mipi_video_phy_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) { + struct phy *phy = devm_phy_create(dev, + &exynos_mipi_video_phy_ops, NULL); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY %d\n", i); + return PTR_ERR(phy); + } + + state->phys[i].phy = phy; + state->phys[i].index = i; + phy_set_drvdata(phy, &state->phys[i]); + } + + return 0; +} + +static const struct of_device_id exynos_mipi_video_phy_of_match[] = { + { .compatible = "samsung,s5pv210-mipi-video-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match); + +static struct platform_driver exynos_mipi_video_phy_driver = { + .probe = exynos_mipi_video_phy_probe, + .driver = { + .of_match_table = exynos_mipi_video_phy_of_match, + .name = "exynos-mipi-video-phy", + .owner = THIS_MODULE, + } +}; +module_platform_driver(exynos_mipi_video_phy_driver); + +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver"); +MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); +MODULE_LICENSE("GPL v2");