| Message ID | 1387624080-15312-1-git-send-email-shc_work@mail.ru (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Dec 21, 2013 at 03:08:00PM +0400, Alexander Shiyan wrote: > This patch replaces custom lcd_power() callback with > regulator API over LCD class. FYI. Denis' effort on this already goes to v13. http://thread.gmane.org/gmane.linux.ports.arm.kernel/285326 Shawn > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > --- > .../devicetree/bindings/video/fsl,imx-fb.txt | 1 + > arch/arm/mach-imx/mach-mx27ads.c | 55 +++++++++++++++-- > drivers/video/imxfb.c | 71 +++++++++++++++++++--- > include/linux/platform_data/video-imxfb.h | 1 - > 4 files changed, 114 insertions(+), 14 deletions(-) > > diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt > index 46da08d..e6b1ee9 100644 > --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt > +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt > @@ -15,6 +15,7 @@ Required nodes: > - fsl,pcr: LCDC PCR value > > Optional properties: > +- lcd-supply: Regulator for LCD supply voltage. > - fsl,dmacr: DMA Control Register value. This is optional. By default, the > register is not modified as recommended by the datasheet. > - fsl,lscr1: LCDC Sharp Configuration Register value. > diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c > index 9821b824..a7a4a9c 100644 > --- a/arch/arm/mach-imx/mach-mx27ads.c > +++ b/arch/arm/mach-imx/mach-mx27ads.c > @@ -21,6 +21,10 @@ > #include <linux/mtd/physmap.h> > #include <linux/i2c.h> > #include <linux/irq.h> > + > +#include <linux/regulator/fixed.h> > +#include <linux/regulator/machine.h> > + > #include <asm/mach-types.h> > #include <asm/mach/arch.h> > #include <asm/mach/time.h> > @@ -195,14 +199,58 @@ static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = { > static struct i2c_board_info mx27ads_i2c_devices[] = { > }; > > -void lcd_power(int on) > +static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value) > { > - if (on) > + if (value) > __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); > else > __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); > } > > +static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) > +{ > + return 0; > +} > + > +#define MX27ADS_LCD_GPIO (6 * 32) > + > +static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer = > + REGULATOR_SUPPLY("lcd", "imx-fb.0"); > + > +static struct regulator_init_data mx27ads_lcd_regulator_init_data = { > + .constraints = { > + .valid_ops_mask = REGULATOR_CHANGE_STATUS, > +}, > + .consumer_supplies = &mx27ads_lcd_regulator_consumer, > + .num_consumer_supplies = 1, > +}; > + > +static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = { > + .supply_name = "LCD", > + .microvolts = 3300000, > + .gpio = MX27ADS_LCD_GPIO, > + .init_data = &mx27ads_lcd_regulator_init_data, > +}; > + > +static void __init mx27ads_regulator_init(void) > +{ > + struct gpio_chip *vchip; > + > + vchip = kzalloc(sizeof(*vchip), GFP_KERNEL); > + vchip->owner = THIS_MODULE; > + vchip->label = "LCD"; > + vchip->base = MX27ADS_LCD_GPIO; > + vchip->ngpio = 1; > + vchip->direction_output = vgpio_dir_out; > + vchip->set = vgpio_set; > + gpiochip_add(vchip); > + > + platform_device_register_data(&platform_bus, "reg-fixed-voltage", > + PLATFORM_DEVID_AUTO, > + &mx27ads_lcd_regulator_pdata, > + sizeof(mx27ads_lcd_regulator_pdata)); > +} > + > static struct imx_fb_videomode mx27ads_modes[] = { > { > .mode = { > @@ -239,8 +287,6 @@ static const struct imx_fb_platform_data mx27ads_fb_data __initconst = { > .pwmr = 0x00A903FF, > .lscr1 = 0x00120300, > .dmacr = 0x00020010, > - > - .lcd_power = lcd_power, > }; > > static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, > @@ -304,6 +350,7 @@ static void __init mx27ads_board_init(void) > i2c_register_board_info(1, mx27ads_i2c_devices, > ARRAY_SIZE(mx27ads_i2c_devices)); > imx27_add_imx_i2c(1, &mx27ads_i2c1_data); > + mx27ads_regulator_init(); > imx27_add_imx_fb(&mx27ads_fb_data); > imx27_add_mxc_mmc(0, &sdhc1_pdata); > imx27_add_mxc_mmc(1, &sdhc2_pdata); > diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c > index 44ee678..e50b67f 100644 > --- a/drivers/video/imxfb.c > +++ b/drivers/video/imxfb.c > @@ -30,10 +30,13 @@ > #include <linux/platform_device.h> > #include <linux/dma-mapping.h> > #include <linux/io.h> > +#include <linux/lcd.h> > #include <linux/math64.h> > #include <linux/of.h> > #include <linux/of_device.h> > > +#include <linux/regulator/consumer.h> > + > #include <video/of_display_timing.h> > #include <video/of_videomode.h> > #include <video/videomode.h> > @@ -177,8 +180,9 @@ struct imxfb_info { > struct backlight_device *bl; > #endif > > - void (*lcd_power)(int); > void (*backlight_power)(int); > + > + struct regulator *lcd_pwr; > }; > > static struct platform_device_id imxfb_devtype[] = { > @@ -591,8 +595,6 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) > > if (fbi->backlight_power) > fbi->backlight_power(1); > - if (fbi->lcd_power) > - fbi->lcd_power(1); > } > > static void imxfb_disable_controller(struct imxfb_info *fbi) > @@ -604,8 +606,6 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) > > if (fbi->backlight_power) > fbi->backlight_power(0); > - if (fbi->lcd_power) > - fbi->lcd_power(0); > > clk_disable_unprepare(fbi->clk_per); > clk_disable_unprepare(fbi->clk_ipg); > @@ -796,7 +796,6 @@ static int imxfb_init_fbinfo(struct platform_device *pdev) > fbi->lscr1 = pdata->lscr1; > fbi->dmacr = pdata->dmacr; > fbi->pwmr = pdata->pwmr; > - fbi->lcd_power = pdata->lcd_power; > fbi->backlight_power = pdata->backlight_power; > } else { > np = pdev->dev.of_node; > @@ -810,9 +809,6 @@ static int imxfb_init_fbinfo(struct platform_device *pdev) > > of_property_read_u32(np, "fsl,dmacr", &fbi->dmacr); > > - /* These two function pointers could be used by some specific > - * platforms. */ > - fbi->lcd_power = NULL; > fbi->backlight_power = NULL; > } > > @@ -856,9 +852,50 @@ static int imxfb_of_read_mode(struct device *dev, struct device_node *np, > return 0; > } > > +static int imxfb_lcd_check_fb(struct lcd_device *lcddev, struct fb_info *fi) > +{ > + struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); > + > + if (!fi || fi->par == fbi) > + return 1; > + > + return 0; > +} > + > +static int imxfb_lcd_get_power(struct lcd_device *lcddev) > +{ > + struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); > + > + if (!IS_ERR(fbi->lcd_pwr)) > + return regulator_is_enabled(fbi->lcd_pwr); > + > + return 1; > +} > + > +static int imxfb_lcd_set_power(struct lcd_device *lcddev, int power) > +{ > + struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); > + > + if (!IS_ERR(fbi->lcd_pwr)) { > + if (power) > + return regulator_enable(fbi->lcd_pwr); > + else > + return regulator_disable(fbi->lcd_pwr); > + } > + > + return 0; > +} > + > +static struct lcd_ops imxfb_lcd_ops = { > + .check_fb = imxfb_lcd_check_fb, > + .get_power = imxfb_lcd_get_power, > + .set_power = imxfb_lcd_set_power, > +}; > + > static int imxfb_probe(struct platform_device *pdev) > { > struct imxfb_info *fbi; > + struct lcd_device *lcd; > struct fb_info *info; > struct imx_fb_platform_data *pdata; > struct resource *res; > @@ -1020,6 +1057,19 @@ static int imxfb_probe(struct platform_device *pdev) > goto failed_register; > } > > + fbi->lcd_pwr = devm_regulator_get(&pdev->dev, "lcd"); > + if (IS_ERR(fbi->lcd_pwr) && (PTR_ERR(fbi->lcd_pwr) == -EPROBE_DEFER)) { > + ret = -EPROBE_DEFER; > + goto failed_lcd; > + } > + > + lcd = devm_lcd_device_register(&pdev->dev, "imxfb-lcd", &pdev->dev, fbi, > + &imxfb_lcd_ops); > + if (IS_ERR(lcd)) { > + ret = PTR_ERR(lcd); > + goto failed_lcd; > + } > + > imxfb_enable_controller(fbi); > fbi->pdev = pdev; > #ifdef PWMR_BACKLIGHT_AVAILABLE > @@ -1028,6 +1078,9 @@ static int imxfb_probe(struct platform_device *pdev) > > return 0; > > +failed_lcd: > + unregister_framebuffer(info); > + > failed_register: > fb_dealloc_cmap(&info->cmap); > failed_cmap: > diff --git a/include/linux/platform_data/video-imxfb.h b/include/linux/platform_data/video-imxfb.h > index 9de8f06..8902706 100644 > --- a/include/linux/platform_data/video-imxfb.h > +++ b/include/linux/platform_data/video-imxfb.h > @@ -76,7 +76,6 @@ struct imx_fb_platform_data { > int (*init)(struct platform_device *); > void (*exit)(struct platform_device *); > > - void (*lcd_power)(int); > void (*backlight_power)(int); > }; > > -- > 1.8.3.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> On Sat, Dec 21, 2013 at 03:08:00PM +0400, Alexander Shiyan wrote: > > This patch replaces custom lcd_power() callback with > > regulator API over LCD class. > > FYI. Denis' effort on this already goes to v13. > > http://thread.gmane.org/gmane.linux.ports.arm.kernel/285326 Hmm, OK, but having LCD class could resolve our problems with contrast control. https://www.mail-archive.com/devicetree@vger.kernel.org/msg07660.html ---
On Mon, Dec 23, 2013 at 12:24:13PM +0400, Alexander Shiyan wrote: > > On Sat, Dec 21, 2013 at 03:08:00PM +0400, Alexander Shiyan wrote: > > > This patch replaces custom lcd_power() callback with > > > regulator API over LCD class. > > > > FYI. Denis' effort on this already goes to v13. > > > > http://thread.gmane.org/gmane.linux.ports.arm.kernel/285326 > > Hmm, OK, but having LCD class could resolve our problems with contrast control. > https://www.mail-archive.com/devicetree@vger.kernel.org/msg07660.html I just want to make sure you two are aware of each other's work. Shawn -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2013-12-23 10:28, Shawn Guo wrote: > On Mon, Dec 23, 2013 at 12:24:13PM +0400, Alexander Shiyan wrote: >>> On Sat, Dec 21, 2013 at 03:08:00PM +0400, Alexander Shiyan wrote: >>>> This patch replaces custom lcd_power() callback with >>>> regulator API over LCD class. >>> >>> FYI. Denis' effort on this already goes to v13. >>> >>> http://thread.gmane.org/gmane.linux.ports.arm.kernel/285326 >> >> Hmm, OK, but having LCD class could resolve our problems with contrast control. >> https://www.mail-archive.com/devicetree@vger.kernel.org/msg07660.html > > I just want to make sure you two are aware of each other's work. So, should I ignore this patch, or...? Tomi
On Wed, Jan 08, 2014 at 03:32:17PM +0200, Tomi Valkeinen wrote: > On 2013-12-23 10:28, Shawn Guo wrote: > > On Mon, Dec 23, 2013 at 12:24:13PM +0400, Alexander Shiyan wrote: > >>> On Sat, Dec 21, 2013 at 03:08:00PM +0400, Alexander Shiyan wrote: > >>>> This patch replaces custom lcd_power() callback with > >>>> regulator API over LCD class. > >>> > >>> FYI. Denis' effort on this already goes to v13. > >>> > >>> http://thread.gmane.org/gmane.linux.ports.arm.kernel/285326 > >> > >> Hmm, OK, but having LCD class could resolve our problems with contrast control. > >> https://www.mail-archive.com/devicetree@vger.kernel.org/msg07660.html > > > > I just want to make sure you two are aware of each other's work. > > So, should I ignore this patch, or...? No, no, that's not what I meant. Please go ahead to review the patch and merge it if it looks good to you. Shawn -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 21/12/13 13:08, Alexander Shiyan wrote: > This patch replaces custom lcd_power() callback with > regulator API over LCD class. > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > --- > .../devicetree/bindings/video/fsl,imx-fb.txt | 1 + > arch/arm/mach-imx/mach-mx27ads.c | 55 +++++++++++++++-- > drivers/video/imxfb.c | 71 +++++++++++++++++++--- > include/linux/platform_data/video-imxfb.h | 1 - > 4 files changed, 114 insertions(+), 14 deletions(-) > > diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt > index 46da08d..e6b1ee9 100644 > --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt > +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt > @@ -15,6 +15,7 @@ Required nodes: > - fsl,pcr: LCDC PCR value > > Optional properties: > +- lcd-supply: Regulator for LCD supply voltage. > - fsl,dmacr: DMA Control Register value. This is optional. By default, the > register is not modified as recommended by the datasheet. > - fsl,lscr1: LCDC Sharp Configuration Register value. > diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c > index 9821b824..a7a4a9c 100644 > --- a/arch/arm/mach-imx/mach-mx27ads.c > +++ b/arch/arm/mach-imx/mach-mx27ads.c > @@ -21,6 +21,10 @@ > #include <linux/mtd/physmap.h> > #include <linux/i2c.h> > #include <linux/irq.h> > + > +#include <linux/regulator/fixed.h> > +#include <linux/regulator/machine.h> > + > #include <asm/mach-types.h> > #include <asm/mach/arch.h> > #include <asm/mach/time.h> > @@ -195,14 +199,58 @@ static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = { > static struct i2c_board_info mx27ads_i2c_devices[] = { > }; > > -void lcd_power(int on) > +static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value) > { > - if (on) > + if (value) > __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); > else > __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); > } > > +static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) > +{ > + return 0; > +} > + > +#define MX27ADS_LCD_GPIO (6 * 32) > + > +static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer = > + REGULATOR_SUPPLY("lcd", "imx-fb.0"); > + > +static struct regulator_init_data mx27ads_lcd_regulator_init_data = { > + .constraints = { > + .valid_ops_mask = REGULATOR_CHANGE_STATUS, > +}, > + .consumer_supplies = &mx27ads_lcd_regulator_consumer, > + .num_consumer_supplies = 1, > +}; > + > +static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = { > + .supply_name = "LCD", > + .microvolts = 3300000, > + .gpio = MX27ADS_LCD_GPIO, > + .init_data = &mx27ads_lcd_regulator_init_data, > +}; > + > +static void __init mx27ads_regulator_init(void) > +{ > + struct gpio_chip *vchip; > + > + vchip = kzalloc(sizeof(*vchip), GFP_KERNEL); > + vchip->owner = THIS_MODULE; > + vchip->label = "LCD"; > + vchip->base = MX27ADS_LCD_GPIO; > + vchip->ngpio = 1; > + vchip->direction_output = vgpio_dir_out; > + vchip->set = vgpio_set; > + gpiochip_add(vchip); > + > + platform_device_register_data(&platform_bus, "reg-fixed-voltage", > + PLATFORM_DEVID_AUTO, > + &mx27ads_lcd_regulator_pdata, > + sizeof(mx27ads_lcd_regulator_pdata)); > +} > + Hmm, isn't all this something that should be in the board's .dts? Tomi
On 10/02/14 14:16, Alexander Shiyan wrote: > ???????????, 10 ??????? 2014, 14:05 +02:00 ?? Tomi Valkeinen <tomi.valkeinen@ti.com>: >> On 21/12/13 13:08, Alexander Shiyan wrote: >>> This patch replaces custom lcd_power() callback with >>> regulator API over LCD class. >>> >>> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> >>> --- >>> .../devicetree/bindings/video/fsl,imx-fb.txt | 1 + >>> arch/arm/mach-imx/mach-mx27ads.c | 55 +++++++++++++++-- >>> drivers/video/imxfb.c | 71 >> +++++++++++++++++++--- >>> include/linux/platform_data/video-imxfb.h | 1 - >>> 4 files changed, 114 insertions(+), 14 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt >> b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt >>> index 46da08d..e6b1ee9 100644 >>> --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt >>> +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt >>> @@ -15,6 +15,7 @@ Required nodes: >>> - fsl,pcr: LCDC PCR value >>> >>> Optional properties: >>> +- lcd-supply: Regulator for LCD supply voltage. >>> - fsl,dmacr: DMA Control Register value. This is optional. By default, the >>> register is not modified as recommended by the datasheet. >>> - fsl,lscr1: LCDC Sharp Configuration Register value. >>> diff --git a/arch/arm/mach-imx/mach-mx27ads.c > ... >>> +static void __init mx27ads_regulator_init(void) >>> +{ >>> + struct gpio_chip *vchip; >>> + >>> + vchip = kzalloc(sizeof(*vchip), GFP_KERNEL); >>> + vchip->owner = THIS_MODULE; >>> + vchip->label = "LCD"; >>> + vchip->base = MX27ADS_LCD_GPIO; >>> + vchip->ngpio = 1; >>> + vchip->direction_output = vgpio_dir_out; >>> + vchip->set = vgpio_set; >>> + gpiochip_add(vchip); >>> + >>> + platform_device_register_data(&platform_bus, "reg-fixed-voltage", >>> + PLATFORM_DEVID_AUTO, >>> + &mx27ads_lcd_regulator_pdata, >>> + sizeof(mx27ads_lcd_regulator_pdata)); >>> +} >>> + >> >> Hmm, isn't all this something that should be in the board's .dts? > > There are no DT support for this board yet. Oh, ok. You added 'lcd-supply' to devtree binding documentation, so I presumed DT is being used. The drivers/video side looks fine. I can either merge this via fbdev tree if I get an ack from arch/arm/mach-imx/mach-mx27ads.c's maintainer, or this can go via imx tree with my ack. Tomi
On Mon, Feb 10, 2014 at 02:21:29PM +0200, Tomi Valkeinen wrote: > The drivers/video side looks fine. I can either merge this via fbdev > tree if I get an ack from arch/arm/mach-imx/mach-mx27ads.c's maintainer, Acked-by: Shawn Guo <shawn.guo@linaro.org> -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11/02/14 04:43, Shawn Guo wrote:
> Acked-by: Shawn Guo <shawn.guo@linaro.org>
Thanks. Queued for 3.15.
Tomi
???????, 11 ??????? 2014, 15:11 +02:00 ?? Tomi Valkeinen <tomi.valkeinen@ti.com>: > On 11/02/14 04:43, Shawn Guo wrote: > > Acked-by: Shawn Guo <shawn.guo@linaro.org> > > Thanks. Queued for 3.15. Thanks. Tomi, can you additionally apply patch from Denis Carikli to allow have DT-only kernels with i.MX FB driver? http://www.spinics.net/lists/arm-kernel/msg302499.html ---
diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt index 46da08d..e6b1ee9 100644 --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt @@ -15,6 +15,7 @@ Required nodes: - fsl,pcr: LCDC PCR value Optional properties: +- lcd-supply: Regulator for LCD supply voltage. - fsl,dmacr: DMA Control Register value. This is optional. By default, the register is not modified as recommended by the datasheet. - fsl,lscr1: LCDC Sharp Configuration Register value. diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 9821b824..a7a4a9c 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -21,6 +21,10 @@ #include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/irq.h> + +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -195,14 +199,58 @@ static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = { static struct i2c_board_info mx27ads_i2c_devices[] = { }; -void lcd_power(int on) +static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value) { - if (on) + if (value) __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG); else __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG); } +static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) +{ + return 0; +} + +#define MX27ADS_LCD_GPIO (6 * 32) + +static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer = + REGULATOR_SUPPLY("lcd", "imx-fb.0"); + +static struct regulator_init_data mx27ads_lcd_regulator_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, +}, + .consumer_supplies = &mx27ads_lcd_regulator_consumer, + .num_consumer_supplies = 1, +}; + +static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = { + .supply_name = "LCD", + .microvolts = 3300000, + .gpio = MX27ADS_LCD_GPIO, + .init_data = &mx27ads_lcd_regulator_init_data, +}; + +static void __init mx27ads_regulator_init(void) +{ + struct gpio_chip *vchip; + + vchip = kzalloc(sizeof(*vchip), GFP_KERNEL); + vchip->owner = THIS_MODULE; + vchip->label = "LCD"; + vchip->base = MX27ADS_LCD_GPIO; + vchip->ngpio = 1; + vchip->direction_output = vgpio_dir_out; + vchip->set = vgpio_set; + gpiochip_add(vchip); + + platform_device_register_data(&platform_bus, "reg-fixed-voltage", + PLATFORM_DEVID_AUTO, + &mx27ads_lcd_regulator_pdata, + sizeof(mx27ads_lcd_regulator_pdata)); +} + static struct imx_fb_videomode mx27ads_modes[] = { { .mode = { @@ -239,8 +287,6 @@ static const struct imx_fb_platform_data mx27ads_fb_data __initconst = { .pwmr = 0x00A903FF, .lscr1 = 0x00120300, .dmacr = 0x00020010, - - .lcd_power = lcd_power, }; static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, @@ -304,6 +350,7 @@ static void __init mx27ads_board_init(void) i2c_register_board_info(1, mx27ads_i2c_devices, ARRAY_SIZE(mx27ads_i2c_devices)); imx27_add_imx_i2c(1, &mx27ads_i2c1_data); + mx27ads_regulator_init(); imx27_add_imx_fb(&mx27ads_fb_data); imx27_add_mxc_mmc(0, &sdhc1_pdata); imx27_add_mxc_mmc(1, &sdhc2_pdata); diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 44ee678..e50b67f 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -30,10 +30,13 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/io.h> +#include <linux/lcd.h> #include <linux/math64.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/regulator/consumer.h> + #include <video/of_display_timing.h> #include <video/of_videomode.h> #include <video/videomode.h> @@ -177,8 +180,9 @@ struct imxfb_info { struct backlight_device *bl; #endif - void (*lcd_power)(int); void (*backlight_power)(int); + + struct regulator *lcd_pwr; }; static struct platform_device_id imxfb_devtype[] = { @@ -591,8 +595,6 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) if (fbi->backlight_power) fbi->backlight_power(1); - if (fbi->lcd_power) - fbi->lcd_power(1); } static void imxfb_disable_controller(struct imxfb_info *fbi) @@ -604,8 +606,6 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) if (fbi->backlight_power) fbi->backlight_power(0); - if (fbi->lcd_power) - fbi->lcd_power(0); clk_disable_unprepare(fbi->clk_per); clk_disable_unprepare(fbi->clk_ipg); @@ -796,7 +796,6 @@ static int imxfb_init_fbinfo(struct platform_device *pdev) fbi->lscr1 = pdata->lscr1; fbi->dmacr = pdata->dmacr; fbi->pwmr = pdata->pwmr; - fbi->lcd_power = pdata->lcd_power; fbi->backlight_power = pdata->backlight_power; } else { np = pdev->dev.of_node; @@ -810,9 +809,6 @@ static int imxfb_init_fbinfo(struct platform_device *pdev) of_property_read_u32(np, "fsl,dmacr", &fbi->dmacr); - /* These two function pointers could be used by some specific - * platforms. */ - fbi->lcd_power = NULL; fbi->backlight_power = NULL; } @@ -856,9 +852,50 @@ static int imxfb_of_read_mode(struct device *dev, struct device_node *np, return 0; } +static int imxfb_lcd_check_fb(struct lcd_device *lcddev, struct fb_info *fi) +{ + struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); + + if (!fi || fi->par == fbi) + return 1; + + return 0; +} + +static int imxfb_lcd_get_power(struct lcd_device *lcddev) +{ + struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); + + if (!IS_ERR(fbi->lcd_pwr)) + return regulator_is_enabled(fbi->lcd_pwr); + + return 1; +} + +static int imxfb_lcd_set_power(struct lcd_device *lcddev, int power) +{ + struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); + + if (!IS_ERR(fbi->lcd_pwr)) { + if (power) + return regulator_enable(fbi->lcd_pwr); + else + return regulator_disable(fbi->lcd_pwr); + } + + return 0; +} + +static struct lcd_ops imxfb_lcd_ops = { + .check_fb = imxfb_lcd_check_fb, + .get_power = imxfb_lcd_get_power, + .set_power = imxfb_lcd_set_power, +}; + static int imxfb_probe(struct platform_device *pdev) { struct imxfb_info *fbi; + struct lcd_device *lcd; struct fb_info *info; struct imx_fb_platform_data *pdata; struct resource *res; @@ -1020,6 +1057,19 @@ static int imxfb_probe(struct platform_device *pdev) goto failed_register; } + fbi->lcd_pwr = devm_regulator_get(&pdev->dev, "lcd"); + if (IS_ERR(fbi->lcd_pwr) && (PTR_ERR(fbi->lcd_pwr) == -EPROBE_DEFER)) { + ret = -EPROBE_DEFER; + goto failed_lcd; + } + + lcd = devm_lcd_device_register(&pdev->dev, "imxfb-lcd", &pdev->dev, fbi, + &imxfb_lcd_ops); + if (IS_ERR(lcd)) { + ret = PTR_ERR(lcd); + goto failed_lcd; + } + imxfb_enable_controller(fbi); fbi->pdev = pdev; #ifdef PWMR_BACKLIGHT_AVAILABLE @@ -1028,6 +1078,9 @@ static int imxfb_probe(struct platform_device *pdev) return 0; +failed_lcd: + unregister_framebuffer(info); + failed_register: fb_dealloc_cmap(&info->cmap); failed_cmap: diff --git a/include/linux/platform_data/video-imxfb.h b/include/linux/platform_data/video-imxfb.h index 9de8f06..8902706 100644 --- a/include/linux/platform_data/video-imxfb.h +++ b/include/linux/platform_data/video-imxfb.h @@ -76,7 +76,6 @@ struct imx_fb_platform_data { int (*init)(struct platform_device *); void (*exit)(struct platform_device *); - void (*lcd_power)(int); void (*backlight_power)(int); };
This patch replaces custom lcd_power() callback with regulator API over LCD class. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> --- .../devicetree/bindings/video/fsl,imx-fb.txt | 1 + arch/arm/mach-imx/mach-mx27ads.c | 55 +++++++++++++++-- drivers/video/imxfb.c | 71 +++++++++++++++++++--- include/linux/platform_data/video-imxfb.h | 1 - 4 files changed, 114 insertions(+), 14 deletions(-)