@@ -50,9 +50,10 @@ struct panel_drv_data {
struct omap_video_timings videomode;
- int reset_gpio;
+ /* used for non-DT boot, to be removed */
int backlight_gpio;
- int enable_gpio;
+
+ struct gpio_desc *enable_gpio;
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
@@ -165,8 +166,8 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
if (r)
return r;
- if (gpio_is_valid(ddata->enable_gpio))
- gpio_set_value_cansleep(ddata->enable_gpio, 1);
+ if (ddata->enable_gpio)
+ gpiod_set_value_cansleep(ddata->enable_gpio, 1);
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 1);
@@ -184,8 +185,8 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
if (!omapdss_device_is_enabled(dssdev))
return;
- if (gpio_is_valid(ddata->enable_gpio))
- gpio_set_value_cansleep(ddata->enable_gpio, 0);
+ if (ddata->enable_gpio)
+ gpiod_set_value_cansleep(ddata->enable_gpio, 0);
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 0);
@@ -243,6 +244,7 @@ static int lb035q02_probe_pdata(struct spi_device *spi)
const struct panel_lb035q02_platform_data *pdata;
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev, *in;
+ int r;
pdata = dev_get_platdata(&spi->dev);
@@ -260,10 +262,19 @@ static int lb035q02_probe_pdata(struct spi_device *spi)
dssdev = &ddata->dssdev;
dssdev->name = pdata->name;
- ddata->enable_gpio = pdata->enable_gpio;
+ r = devm_gpio_request_one(&spi->dev, pdata->enable_gpio,
+ GPIOF_OUT_INIT_LOW, "panel enable");
+ if (r)
+ goto err_gpio;
+
+ ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
ddata->backlight_gpio = pdata->backlight_gpio;
return 0;
+err_gpio:
+ omap_dss_put_device(ddata->in);
+ return r;
}
static int lb035q02_panel_spi_probe(struct spi_device *spi)
@@ -288,13 +299,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
return -ENODEV;
}
- if (gpio_is_valid(ddata->enable_gpio)) {
- r = devm_gpio_request_one(&spi->dev, ddata->enable_gpio,
- GPIOF_OUT_INIT_LOW, "panel enable");
- if (r)
- goto err_gpio;
- }
-
if (gpio_is_valid(ddata->backlight_gpio)) {
r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
GPIOF_OUT_INIT_LOW, "panel backlight");
The new gpiod API supports automatic handling of active-high/active-low with DT. To make it possible to use that when booting with DT, change the driver's handling of the enable GPIO to use gpiod. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- .../omap2/displays-new/panel-lgphilips-lb035q02.c | 32 ++++++++++++---------- 1 file changed, 18 insertions(+), 14 deletions(-)