From patchwork Wed May 28 23:20:16 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alexandre Belloni X-Patchwork-Id: 4257961 Return-Path: X-Original-To: patchwork-linux-fbdev@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 73F96BF90B for ; Wed, 28 May 2014 23:22:07 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 3FD5520306 for ; Wed, 28 May 2014 23:22:06 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id C882F20320 for ; Wed, 28 May 2014 23:22:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932477AbaE1XWB (ORCPT ); Wed, 28 May 2014 19:22:01 -0400 Received: from top.free-electrons.com ([176.31.233.9]:47899 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932397AbaE1XV6 (ORCPT ); Wed, 28 May 2014 19:21:58 -0400 Received: by mail.free-electrons.com (Postfix, from userid 106) id D7CDA88B; Thu, 29 May 2014 01:21:57 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-7.5 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=ham version=3.3.1 Received: from localhost (rama.bulix.org [5.39.87.92]) by mail.free-electrons.com (Postfix) with ESMTPSA id 663AB815; Thu, 29 May 2014 01:21:54 +0200 (CEST) From: Alexandre Belloni To: Greg Kroah-Hartman Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Nicolas Ferre , Jean-Christophe Plagniol-Villard , Haavard Skinnemoen , Hans-Christian Egtvedt , Bryan Wu , Jingoo Han , linux-leds@vger.kernel.org, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, Alexandre Belloni Subject: [PATCHv2 13/15] backlight: atmel-pwm-bl: remove obsolete driver Date: Thu, 29 May 2014 01:20:16 +0200 Message-Id: <1401319218-16772-14-git-send-email-alexandre.belloni@free-electrons.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1401319218-16772-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1401319218-16772-1-git-send-email-alexandre.belloni@free-electrons.com> Sender: linux-fbdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-fbdev@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The atmel-pwm-bl driver is now obsolete. It is not used by any mainlined boards and is replaced by the generic pwm_bl with the pawm-atmel driver using the generic PWM framework. Signed-off-by: Alexandre Belloni Acked-by: Hans-Christian Egtvedt Acked-by: Jingoo Han --- drivers/video/backlight/Kconfig | 11 -- drivers/video/backlight/Makefile | 1 - drivers/video/backlight/atmel-pwm-bl.c | 223 --------------------------------- include/linux/atmel-pwm-bl.h | 43 ------- 4 files changed, 278 deletions(-) delete mode 100644 drivers/video/backlight/atmel-pwm-bl.c delete mode 100644 include/linux/atmel-pwm-bl.h diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 5a3eb2ecb525..9bd32b7a7561 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -178,17 +178,6 @@ config BACKLIGHT_ATMEL_LCDC If in doubt, it's safe to enable this option; it doesn't kick in unless the board's description says it's wired that way. -config BACKLIGHT_ATMEL_PWM - tristate "Atmel PWM backlight control" - depends on ATMEL_PWM - help - Say Y here if you want to use the PWM peripheral in Atmel AT91 and - AVR32 devices. This driver will need additional platform data to know - which PWM instance to use and how to configure it. - - To compile this driver as a module, choose M here: the module will be - called atmel-pwm-bl. - config BACKLIGHT_EP93XX tristate "Cirrus EP93xx Backlight Driver" depends on FB_EP93XX diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index bb820024f346..351451dbb607 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o obj-$(CONFIG_BACKLIGHT_AS3711) += as3711_bl.o -obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o obj-$(CONFIG_BACKLIGHT_BD6107) += bd6107.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c deleted file mode 100644 index 261b1a4ec3d8..000000000000 --- a/drivers/video/backlight/atmel-pwm-bl.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) 2008 Atmel Corporation - * - * Backlight driver using Atmel PWM peripheral. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct atmel_pwm_bl { - const struct atmel_pwm_bl_platform_data *pdata; - struct backlight_device *bldev; - struct platform_device *pdev; - struct pwm_channel pwmc; - int gpio_on; -}; - -static void atmel_pwm_bl_set_gpio_on(struct atmel_pwm_bl *pwmbl, int on) -{ - if (!gpio_is_valid(pwmbl->gpio_on)) - return; - - gpio_set_value(pwmbl->gpio_on, on ^ pwmbl->pdata->on_active_low); -} - -static int atmel_pwm_bl_set_intensity(struct backlight_device *bd) -{ - struct atmel_pwm_bl *pwmbl = bl_get_data(bd); - int intensity = bd->props.brightness; - int pwm_duty; - - if (bd->props.power != FB_BLANK_UNBLANK) - intensity = 0; - if (bd->props.fb_blank != FB_BLANK_UNBLANK) - intensity = 0; - - if (pwmbl->pdata->pwm_active_low) - pwm_duty = pwmbl->pdata->pwm_duty_min + intensity; - else - pwm_duty = pwmbl->pdata->pwm_duty_max - intensity; - - if (pwm_duty > pwmbl->pdata->pwm_duty_max) - pwm_duty = pwmbl->pdata->pwm_duty_max; - if (pwm_duty < pwmbl->pdata->pwm_duty_min) - pwm_duty = pwmbl->pdata->pwm_duty_min; - - if (!intensity) { - atmel_pwm_bl_set_gpio_on(pwmbl, 0); - pwm_channel_writel(&pwmbl->pwmc, PWM_CUPD, pwm_duty); - pwm_channel_disable(&pwmbl->pwmc); - } else { - pwm_channel_enable(&pwmbl->pwmc); - pwm_channel_writel(&pwmbl->pwmc, PWM_CUPD, pwm_duty); - atmel_pwm_bl_set_gpio_on(pwmbl, 1); - } - - return 0; -} - -static int atmel_pwm_bl_get_intensity(struct backlight_device *bd) -{ - struct atmel_pwm_bl *pwmbl = bl_get_data(bd); - u32 cdty; - u32 intensity; - - cdty = pwm_channel_readl(&pwmbl->pwmc, PWM_CDTY); - if (pwmbl->pdata->pwm_active_low) - intensity = cdty - pwmbl->pdata->pwm_duty_min; - else - intensity = pwmbl->pdata->pwm_duty_max - cdty; - - return intensity & 0xffff; -} - -static int atmel_pwm_bl_init_pwm(struct atmel_pwm_bl *pwmbl) -{ - unsigned long pwm_rate = pwmbl->pwmc.mck; - unsigned long prescale = DIV_ROUND_UP(pwm_rate, - (pwmbl->pdata->pwm_frequency * - pwmbl->pdata->pwm_compare_max)) - 1; - - /* - * Prescale must be power of two and maximum 0xf in size because of - * hardware limit. PWM speed will be: - * PWM module clock speed / (2 ^ prescale). - */ - prescale = fls(prescale); - if (prescale > 0xf) - prescale = 0xf; - - pwm_channel_writel(&pwmbl->pwmc, PWM_CMR, prescale); - pwm_channel_writel(&pwmbl->pwmc, PWM_CDTY, - pwmbl->pdata->pwm_duty_min + - pwmbl->bldev->props.brightness); - pwm_channel_writel(&pwmbl->pwmc, PWM_CPRD, - pwmbl->pdata->pwm_compare_max); - - dev_info(&pwmbl->pdev->dev, "Atmel PWM backlight driver (%lu Hz)\n", - pwmbl->pwmc.mck / pwmbl->pdata->pwm_compare_max / - (1 << prescale)); - - return pwm_channel_enable(&pwmbl->pwmc); -} - -static const struct backlight_ops atmel_pwm_bl_ops = { - .get_brightness = atmel_pwm_bl_get_intensity, - .update_status = atmel_pwm_bl_set_intensity, -}; - -static int atmel_pwm_bl_probe(struct platform_device *pdev) -{ - struct backlight_properties props; - const struct atmel_pwm_bl_platform_data *pdata; - struct backlight_device *bldev; - struct atmel_pwm_bl *pwmbl; - unsigned long flags; - int retval; - - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) - return -ENODEV; - - if (pdata->pwm_compare_max < pdata->pwm_duty_max || - pdata->pwm_duty_min > pdata->pwm_duty_max || - pdata->pwm_frequency == 0) - return -EINVAL; - - pwmbl = devm_kzalloc(&pdev->dev, sizeof(struct atmel_pwm_bl), - GFP_KERNEL); - if (!pwmbl) - return -ENOMEM; - - pwmbl->pdev = pdev; - pwmbl->pdata = pdata; - pwmbl->gpio_on = pdata->gpio_on; - - retval = pwm_channel_alloc(pdata->pwm_channel, &pwmbl->pwmc); - if (retval) - return retval; - - if (gpio_is_valid(pwmbl->gpio_on)) { - /* Turn display off by default. */ - if (pdata->on_active_low) - flags = GPIOF_OUT_INIT_HIGH; - else - flags = GPIOF_OUT_INIT_LOW; - - retval = devm_gpio_request_one(&pdev->dev, pwmbl->gpio_on, - flags, "gpio_atmel_pwm_bl"); - if (retval) - goto err_free_pwm; - } - - memset(&props, 0, sizeof(struct backlight_properties)); - props.type = BACKLIGHT_RAW; - props.max_brightness = pdata->pwm_duty_max - pdata->pwm_duty_min; - bldev = devm_backlight_device_register(&pdev->dev, "atmel-pwm-bl", - &pdev->dev, pwmbl, &atmel_pwm_bl_ops, - &props); - if (IS_ERR(bldev)) { - retval = PTR_ERR(bldev); - goto err_free_pwm; - } - - pwmbl->bldev = bldev; - - platform_set_drvdata(pdev, pwmbl); - - /* Power up the backlight by default at middle intesity. */ - bldev->props.power = FB_BLANK_UNBLANK; - bldev->props.brightness = bldev->props.max_brightness / 2; - - retval = atmel_pwm_bl_init_pwm(pwmbl); - if (retval) - goto err_free_pwm; - - atmel_pwm_bl_set_intensity(bldev); - - return 0; - -err_free_pwm: - pwm_channel_free(&pwmbl->pwmc); - - return retval; -} - -static int atmel_pwm_bl_remove(struct platform_device *pdev) -{ - struct atmel_pwm_bl *pwmbl = platform_get_drvdata(pdev); - - atmel_pwm_bl_set_gpio_on(pwmbl, 0); - pwm_channel_disable(&pwmbl->pwmc); - pwm_channel_free(&pwmbl->pwmc); - - return 0; -} - -static struct platform_driver atmel_pwm_bl_driver = { - .driver = { - .name = "atmel-pwm-bl", - }, - /* REVISIT add suspend() and resume() */ - .probe = atmel_pwm_bl_probe, - .remove = atmel_pwm_bl_remove, -}; - -module_platform_driver(atmel_pwm_bl_driver); - -MODULE_AUTHOR("Hans-Christian egtvedt "); -MODULE_DESCRIPTION("Atmel PWM backlight driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:atmel-pwm-bl"); diff --git a/include/linux/atmel-pwm-bl.h b/include/linux/atmel-pwm-bl.h deleted file mode 100644 index 0153a47806c2..000000000000 --- a/include/linux/atmel-pwm-bl.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2007 Atmel Corporation - * - * Driver for the AT32AP700X PS/2 controller (PSIF). - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __INCLUDE_ATMEL_PWM_BL_H -#define __INCLUDE_ATMEL_PWM_BL_H - -/** - * struct atmel_pwm_bl_platform_data - * @pwm_channel: which PWM channel in the PWM module to use. - * @pwm_frequency: PWM frequency to generate, the driver will try to be as - * close as the prescaler allows. - * @pwm_compare_max: value to use in the PWM channel compare register. - * @pwm_duty_max: maximum duty cycle value, must be less than or equal to - * pwm_compare_max. - * @pwm_duty_min: minimum duty cycle value, must be less than pwm_duty_max. - * @pwm_active_low: set to one if the low part of the PWM signal increases the - * brightness of the backlight. - * @gpio_on: GPIO line to control the backlight on/off, set to -1 if not used. - * @on_active_low: set to one if the on/off signal is on when GPIO is low. - * - * This struct must be added to the platform device in the board code. It is - * used by the atmel-pwm-bl driver to setup the GPIO to control on/off and the - * PWM device. - */ -struct atmel_pwm_bl_platform_data { - unsigned int pwm_channel; - unsigned int pwm_frequency; - unsigned int pwm_compare_max; - unsigned int pwm_duty_max; - unsigned int pwm_duty_min; - unsigned int pwm_active_low; - int gpio_on; - unsigned int on_active_low; -}; - -#endif /* __INCLUDE_ATMEL_PWM_BL_H */