diff mbox

[PATCHv2,03/15] ARM: at91: at91sam9263: switch to generic PWM framework

Message ID 1401319218-16772-4-git-send-email-alexandre.belloni@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Alexandre Belloni May 28, 2014, 11:20 p.m. UTC 
Switch to the pwm/pwm-atmel driver instead of misc/atmel_pwm

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/at91sam9263.c         |  1 +
 arch/arm/mach-at91/at91sam9263_devices.c | 11 ++---------
 2 files changed, 3 insertions(+), 9 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f30290572293..f6663d6c01ec 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -199,6 +199,7 @@  static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
+	CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 953616e5dbcb..4ab8be942f86 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1131,9 +1131,7 @@  static void __init at91_add_device_watchdog(void) {}
  *  PWM
  * --------------------------------------------------------------------*/
 
-#if defined(CONFIG_ATMEL_PWM)
-static u32 pwm_mask;
-
+#if IS_ENABLED(CONFIG_PWM_ATMEL)
 static struct resource pwm_resources[] = {
 	[0] = {
 		.start	= AT91SAM9263_BASE_PWMC,
@@ -1148,11 +1146,8 @@  static struct resource pwm_resources[] = {
 };
 
 static struct platform_device at91sam9263_pwm0_device = {
-	.name	= "atmel_pwm",
+	.name	= "at91sam9rl-pwm",
 	.id	= -1,
-	.dev	= {
-		.platform_data		= &pwm_mask,
-	},
 	.resource	= pwm_resources,
 	.num_resources	= ARRAY_SIZE(pwm_resources),
 };
@@ -1171,8 +1166,6 @@  void __init at91_add_device_pwm(u32 mask)
 	if (mask & (1 << AT91_PWM3))
 		at91_set_B_periph(AT91_PIN_PB29, 1);	/* enable PWM3 */
 
-	pwm_mask = mask;
-
 	platform_device_register(&at91sam9263_pwm0_device);
 }
 #else