diff mbox

fb: adv7393: add missing semicolon

Message ID 1404284022-24866-1-git-send-email-scott.jiang.linux@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Scott Jiang July 2, 2014, 6:53 a.m. UTC 
Commit f8bd493456c3da372ae81ed8f6b903f6207b9d98 by Jingoo Han
introduced this problem. This makes bfin_adv7393fb.c failed to compile.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
---
 drivers/video/fbdev/bfin_adv7393fb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Tomi Valkeinen July 1, 2014, 10:33 a.m. UTC | #1 
On 02/07/14 09:53, Scott Jiang wrote:
> Commit f8bd493456c3da372ae81ed8f6b903f6207b9d98 by Jingoo Han
> introduced this problem. This makes bfin_adv7393fb.c failed to compile.
> 
> Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
> ---
>  drivers/video/fbdev/bfin_adv7393fb.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/bfin_adv7393fb.c b/drivers/video/fbdev/bfin_adv7393fb.c
> index a54f7f7..8fe41ca 100644
> --- a/drivers/video/fbdev/bfin_adv7393fb.c
> +++ b/drivers/video/fbdev/bfin_adv7393fb.c
> @@ -408,7 +408,7 @@ static int bfin_adv7393_fb_probe(struct i2c_client *client,
>  	/* Workaround "PPI Does Not Start Properly In Specific Mode" */
>  	if (ANOMALY_05000400) {
>  		ret = gpio_request_one(P_IDENT(P_PPI0_FS3), GPIOF_OUT_INIT_LOW,
> -					"PPI0_FS3")
> +					"PPI0_FS3");
>  		if (ret) {
>  			dev_err(&client->dev, "PPI0_FS3 GPIO request failed\n");
>  			ret = -EBUSY;
> 

Thanks, queued for 3.16 fixes.

 Tomi
diff mbox

Patch

diff --git a/drivers/video/fbdev/bfin_adv7393fb.c b/drivers/video/fbdev/bfin_adv7393fb.c
index a54f7f7..8fe41ca 100644
--- a/drivers/video/fbdev/bfin_adv7393fb.c
+++ b/drivers/video/fbdev/bfin_adv7393fb.c
@@ -408,7 +408,7 @@  static int bfin_adv7393_fb_probe(struct i2c_client *client,
 	/* Workaround "PPI Does Not Start Properly In Specific Mode" */
 	if (ANOMALY_05000400) {
 		ret = gpio_request_one(P_IDENT(P_PPI0_FS3), GPIOF_OUT_INIT_LOW,
-					"PPI0_FS3")
+					"PPI0_FS3");
 		if (ret) {
 			dev_err(&client->dev, "PPI0_FS3 GPIO request failed\n");
 			ret = -EBUSY;