From patchwork Fri Sep 5 04:48:37 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Xiubo Li X-Patchwork-Id: 4849871 Return-Path: X-Original-To: patchwork-linux-fbdev@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id B181B9F314 for ; Fri, 5 Sep 2014 06:15:06 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 49A382026D for ; Fri, 5 Sep 2014 06:15:05 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id BEBF420268 for ; Fri, 5 Sep 2014 06:15:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751833AbaIEGOo (ORCPT ); Fri, 5 Sep 2014 02:14:44 -0400 Received: from mail-by2on0141.outbound.protection.outlook.com ([207.46.100.141]:21697 "EHLO na01-by2-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750736AbaIEGOm (ORCPT ); Fri, 5 Sep 2014 02:14:42 -0400 X-Greylist: delayed 2072 seconds by postgrey-1.27 at vger.kernel.org; Fri, 05 Sep 2014 02:14:42 EDT Received: from CH1PR03CA004.namprd03.prod.outlook.com (10.255.156.149) by DM2PR0301MB0622.namprd03.prod.outlook.com (25.160.95.26) with Microsoft SMTP Server (TLS) id 15.0.1019.16; Fri, 5 Sep 2014 05:40:07 +0000 Received: from BY2FFO11FD046.protection.gbl (10.255.156.132) by CH1PR03CA004.outlook.office365.com (10.255.156.149) with Microsoft SMTP Server (TLS) id 15.0.1019.16 via Frontend Transport; Fri, 5 Sep 2014 05:40:06 +0000 Received: from tx30smr01.am.freescale.net (192.88.168.50) by BY2FFO11FD046.mail.protection.outlook.com (10.1.15.170) with Microsoft SMTP Server (TLS) id 15.0.1010.11 via Frontend Transport; Fri, 5 Sep 2014 05:40:06 +0000 Received: from rock.ap.freescale.net (rock.ap.freescale.net [10.193.20.106]) by tx30smr01.am.freescale.net (8.14.3/8.14.0) with ESMTP id s855dwan012302; Thu, 4 Sep 2014 22:39:59 -0700 From: Xiubo Li To: , , , , , , , , , , , , , , CC: , , Xiubo Li Subject: [PATCH] fbdev: fsl-sii902x: HDMI support for Freescale SoCs Date: Fri, 5 Sep 2014 12:48:37 +0800 Message-ID: <1409892517-29816-1-git-send-email-Li.Xiubo@freescale.com> X-Mailer: git-send-email 1.8.4 X-EOPAttributedMessage: 0 X-Forefront-Antispam-Report: CIP:192.88.168.50; CTRY:US; IPV:CAL; IPV:NLI; EFV:NLI; SFV:NSPM; SFS:(10019016)(6009001)(6029001)(199003)(189002)(89996001)(77982001)(92566001)(93916002)(575784001)(86362001)(79102001)(62966002)(83072002)(6806004)(2201001)(4396001)(92726001)(50226001)(85852003)(106466001)(19580395003)(88136002)(76482001)(87936001)(21056001)(90102001)(50466002)(31966008)(85306004)(77156001)(74502001)(50986999)(95666004)(46102001)(81542001)(105606002)(104166001)(26826002)(64706001)(47776003)(81342001)(229853001)(48376002)(107046002)(83322001)(97736001)(84676001)(36756003)(19580405001)(44976005)(99396002)(74662001)(80022001)(87286001)(68736004)(104016003)(102836001)(20776003)(1121002)(921003)(2004002); DIR:OUT; SFP:1102; SCL:1; SRVR:DM2PR0301MB0622; H:tx30smr01.am.freescale.net; FPR:; MLV:ovrnspm; PTR:InfoDomainNonexistent; A:1; MX:1; LANG:en; MIME-Version: 1.0 X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;UriScan:; X-Forefront-PRVS: 0325F6C77B Received-SPF: Fail (protection.outlook.com: domain of freescale.com does not designate 192.88.168.50 as permitted sender) receiver=protection.outlook.com; client-ip=192.88.168.50; helo=tx30smr01.am.freescale.net; Authentication-Results: spf=fail (sender IP is 192.88.168.50) smtp.mailfrom=Li.Xiubo@freescale.com; X-OriginatorOrg: freescale.com Sender: linux-fbdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-fbdev@vger.kernel.org X-Spam-Status: No, score=-8.6 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Some Freescale SoCs, there has an DVI/HDMI controller and a PHY, attached to one of their display controller unit's LCDC interfaces. This patch adds a preliminary static support for such controllers. This will support for many modes and a dynamic switching between them. Signed-off-by: Xiubo Li --- .../devicetree/bindings/video/fsl-sii902x.txt | 17 + drivers/video/fbdev/Kconfig | 7 + drivers/video/fbdev/Makefile | 1 + drivers/video/fbdev/fsl-sii902x.c | 526 +++++++++++++++++++++ 4 files changed, 551 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/fsl-sii902x.txt create mode 100644 drivers/video/fbdev/fsl-sii902x.c diff --git a/Documentation/devicetree/bindings/video/fsl-sii902x.txt b/Documentation/devicetree/bindings/video/fsl-sii902x.txt new file mode 100644 index 0000000..55c63ad6 --- /dev/null +++ b/Documentation/devicetree/bindings/video/fsl-sii902x.txt @@ -0,0 +1,17 @@ +Device-Tree binding for SII902X HDMI driver + +Required properties: +- compatible: Must contain "fsl,sii902x". +- reg: I2C address of the SII902X HDMI device. +- interrupts: One interrupt of the fb dev. + +Example: +&i2c1 { + status = "okay"; + + hdmi: sii9022a@39 { + compatible = "fsl,sii902x"; + reg = <0x39>; + interrupts = ; + }; +}; diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index ccbe2ae..946eb5c 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -1976,6 +1976,13 @@ config FB_FSL_DIU ---help--- Framebuffer driver for the Freescale SoC DIU +config FB_FSL_SII902X + tristate "Si Image SII902X DVI/HDMI Interface Chip" + depends on FB && FSL_SOC + select FB_MODE_HELPERS + ---help--- + Driver for the Freescale SoC's DVI/HDMI controller. + config FB_W100 tristate "W100 frame buffer support" depends on FB && ARCH_PXA diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile index 1979aff..9aeb441 100644 --- a/drivers/video/fbdev/Makefile +++ b/drivers/video/fbdev/Makefile @@ -110,6 +110,7 @@ obj-$(CONFIG_FB_IMX) += imxfb.o obj-$(CONFIG_FB_S3C) += s3c-fb.o obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o +obj-$(CONFIG_FB_FSL_SII902X) += fsl-sii902x.o obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o obj-$(CONFIG_FB_PS3) += ps3fb.o diff --git a/drivers/video/fbdev/fsl-sii902x.c b/drivers/video/fbdev/fsl-sii902x.c new file mode 100644 index 0000000..e0fb3dd --- /dev/null +++ b/drivers/video/fbdev/fsl-sii902x.c @@ -0,0 +1,526 @@ +/* + * Copyright (C) 2010-2014 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "edid.h" + +static bool g_enable_hdmi; + +struct sii902x_data { + struct i2c_client *client; + struct delayed_work det_work; + struct fb_info *fbi; + struct regmap *regmap; + unsigned int irq; + u8 cable_plugin; +} *sii902x; + +static struct i2c_client *sii902x_to_i2c(struct sii902x_data *sii902x) +{ + return sii902x->client; +} + +static s32 sii902x_write(const struct i2c_client *client, + u8 command, u8 value) +{ + return i2c_smbus_write_byte_data(client, command, value); +} + +static s32 sii902x_read(const struct i2c_client *client, u8 command) +{ + int val; + + val = i2c_smbus_read_word_data(client, command); + + return val & 0xff; +} + +static ssize_t sii902x_show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + strcpy(buf, sii902x->fbi->fix.id); + sprintf(buf+strlen(buf), "\n"); + + return strlen(buf); +} + +static DEVICE_ATTR(fb_name, S_IRUGO, sii902x_show_name, NULL); + +static ssize_t sii902x_show_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + if (sii902x->cable_plugin == 0) + strcpy(buf, "plugout\n"); + else + strcpy(buf, "plugin\n"); + + return strlen(buf); +} + +static DEVICE_ATTR(cable_state, S_IRUGO, sii902x_show_state, NULL); + +static void sii902x_power_up_tx(struct sii902x_data *sii902x) +{ + struct i2c_client *client = sii902x_to_i2c(sii902x); + int val; + + val = sii902x_read(client, 0x1E); + val &= ~0x3; + sii902x_write(client, 0x1E, val); +} + +static void sii902x_setup(struct fb_info *fbi) +{ + u16 data[4]; + u32 refresh; + u8 *tmp; + int i; + + /* Power up */ + sii902x_power_up_tx(sii902x); + + /* set TPI video mode */ + data[0] = PICOS2KHZ(fbi->var.pixclock) / 10; + data[2] = fbi->var.hsync_len + fbi->var.left_margin + + fbi->var.xres + fbi->var.right_margin; + data[3] = fbi->var.vsync_len + fbi->var.upper_margin + + fbi->var.yres + fbi->var.lower_margin; + refresh = data[2] * data[3]; + refresh = (PICOS2KHZ(fbi->var.pixclock) * 1000) / refresh; + data[1] = refresh * 100; + tmp = (u8 *)data; + for (i = 0; i < 8; i++) + sii902x_write(sii902x->client, i, tmp[i]); + + /* input bus/pixel: full pixel wide (24bit), rising edge */ + sii902x_write(sii902x->client, 0x08, 0x70); + /* Set input format to RGB */ + sii902x_write(sii902x->client, 0x09, 0x00); + /* set output format to RGB */ + sii902x_write(sii902x->client, 0x0A, 0x00); + /* audio setup */ + sii902x_write(sii902x->client, 0x25, 0x00); + sii902x_write(sii902x->client, 0x26, 0x40); + sii902x_write(sii902x->client, 0x27, 0x00); +} + +static int __sii902x_read_edid(struct i2c_adapter *adp, + unsigned char *edid, u8 *buf) +{ + unsigned short addr = 0x50; + int ret; + + struct i2c_msg msg[2] = { + { + .addr = addr, + .flags = 0, + .len = 1, + .buf = buf, + }, { + .addr = addr, + .flags = I2C_M_RD, + .len = EDID_LENGTH, + .buf = edid, + }, + }; + + if (adp == NULL) + return -EINVAL; + + memset(edid, 0, EDID_LENGTH); + + ret = i2c_transfer(adp, msg, 2); + if (ret < 0) + return ret; + + /* If 0x50 fails, try 0x37. */ + if (edid[1] == 0x00) { + msg[0].addr = msg[1].addr = 0x37; + ret = i2c_transfer(adp, msg, 2); + if (ret < 0) + return ret; + } + + if (edid[1] == 0x00) + return -ENOENT; + + return 0; +} +/* make sure edid has 256 bytes*/ +static int __sii902x_get_edid(struct i2c_adapter *adp, + struct fb_info *fbi) +{ + u8 *edid; + u8 buf[2] = {0, 0}; + int num, ret; + + edid = kzalloc(EDID_LENGTH, GFP_KERNEL); + if (!edid) + return -ENOMEM; + + ret = __sii902x_read_edid(adp, edid, buf); + if (ret) + return ret; + + /* edid first block parsing */ + memset(&fbi->monspecs, 0, sizeof(fbi->monspecs)); + fb_edid_to_monspecs(edid, &fbi->monspecs); + + /* need read ext block? Only support one more blk now */ + num = edid[0x7E]; + if (num) { + buf[0] = 0x80; + ret = __sii902x_read_edid(adp, edid, buf); + if (ret) + return ret; + + fb_edid_add_monspecs(edid, &fbi->monspecs); + } + + kfree(edid); + return 0; +} +static int sii902x_get_edid(struct fb_info *fbi) +{ + int old, dat, ret, cnt = 100; + + old = sii902x_read(sii902x->client, 0x1A); + + sii902x_write(sii902x->client, 0x1A, old | 0x4); + do { + cnt--; + msleep(20); + dat = sii902x_read(sii902x->client, 0x1A); + } while ((!(dat & 0x2)) && cnt); + + if (!cnt) { + ret = -1; + goto done; + } + + sii902x_write(sii902x->client, 0x1A, old | 0x06); + + /* edid reading */ + ret = __sii902x_get_edid(sii902x->client->adapter, fbi); + + cnt = 100; + do { + cnt--; + sii902x_write(sii902x->client, 0x1A, old & ~0x6); + msleep(20); + dat = sii902x_read(sii902x->client, 0x1A); + } while ((dat & 0x6) && cnt); + + if (!cnt) + ret = -1; + +done: + sii902x_write(sii902x->client, 0x1A, old); + return ret; +} + +static void det_worker(struct work_struct *work) +{ + struct fb_info *fbi = sii902x->fbi; + struct fb_monspecs *monspecs = &fbi->monspecs; + int val, ret; + char event_string[16]; + char *envp[] = { event_string, NULL }; + + val = sii902x_read(sii902x->client, 0x3D); + if (!(val & 0x1) && !g_enable_hdmi) + goto err; + + /* cable connection changes */ + if (val & 0x4 || g_enable_hdmi) { + sii902x->cable_plugin = 1; + sprintf(event_string, "EVENT=plugin"); + + ret = sii902x_get_edid(fbi); + if (ret < 0) { + dev_err(&sii902x->client->dev, "read edid fail\n"); + goto err; + } + + /* make sure fb is powerdown */ + console_lock(); + fb_blank(fbi, FB_BLANK_POWERDOWN); + console_unlock(); + + if (monspecs->modedb_len > 0) { + int i; + const struct fb_videomode *mode; + struct fb_videomode m; + + fb_destroy_modelist(&fbi->modelist); + + for (i = 0; i < monspecs->modedb_len; i++) { + /* We do not support interlaced mode for now */ + if (!(monspecs->modedb[i].vmode & + FB_VMODE_INTERLACED)) + fb_add_videomode(&monspecs->modedb[i], + &fbi->modelist); + } + + fb_var_to_videomode(&m, &fbi->var); + mode = fb_find_nearest_mode(&m, + &fbi->modelist); + + fb_videomode_to_var(&fbi->var, mode); + + fbi->var.activate |= FB_ACTIVATE_FORCE; + console_lock(); + fbi->flags |= FBINFO_MISC_USEREVENT; + fb_set_var(fbi, &fbi->var); + fbi->flags &= ~FBINFO_MISC_USEREVENT; + console_unlock(); + } + + console_lock(); + fb_blank(fbi, FB_BLANK_UNBLANK); + console_unlock(); + } else { + sii902x->cable_plugin = 0; + sprintf(event_string, "EVENT=plugout"); + console_lock(); + fb_blank(fbi, FB_BLANK_POWERDOWN); + console_unlock(); + } + kobject_uevent_env(&sii902x->client->dev.kobj, + KOBJ_CHANGE, envp); + +err: + sii902x_write(sii902x->client, 0x3D, val); +} + +static irqreturn_t sii902x_detect_handler(int irq, void *data) +{ + if (g_enable_hdmi) + g_enable_hdmi = false; + + if (sii902x->fbi) + schedule_delayed_work(&(sii902x->det_work), + msecs_to_jiffies(20)); + return IRQ_HANDLED; +} + +static void sii902x_poweron(void) +{ + /* Turn on DVI or HDMI */ + sii902x_write(sii902x->client, 0x1A, 0x00); +} + +static void sii902x_poweroff(void) +{ + /* disable tmds before changing resolution */ + sii902x_write(sii902x->client, 0x1A, 0x10); +} + +static int sii902x_fb_event(struct notifier_block *nb, + unsigned long val, void *v) +{ + struct fb_event *event = v; + struct fb_info *fbi = event->info; + + switch (val) { + case FB_EVENT_FB_REGISTERED: + if (sii902x->fbi != NULL) + break; + sii902x->fbi = fbi; + if (g_enable_hdmi && sii902x->fbi) { + schedule_delayed_work(&(sii902x->det_work), + msecs_to_jiffies(20)); + } + break; + case FB_EVENT_MODE_CHANGE: + sii902x_setup(fbi); + break; + case FB_EVENT_BLANK: + if (*((int *)event->data) == FB_BLANK_UNBLANK) + sii902x_poweron(); + else + sii902x_poweroff(); + break; + } + + return 0; +} + +static void sii902x_chip_id(struct sii902x_data *sii902x) +{ + struct i2c_client *client = sii902x_to_i2c(sii902x); + int val; + + /* read device ID */ + val = sii902x_read(client, 0x1B); + printk(KERN_INFO "Sii902x: read id = 0x%02X", val); + val = sii902x_read(client, 0x1C); + printk(KERN_INFO "-0x%02X", val); + val = sii902x_read(client, 0x1D); + printk(KERN_INFO "-0x%02X", val); + val = sii902x_read(client, 0x30); + printk(KERN_INFO "-0x%02X\n", val); +} + +static int sii902x_initialize(struct sii902x_data *sii902x) +{ + struct i2c_client *client = sii902x_to_i2c(sii902x); + int ret, cnt; + + for (cnt = 0; cnt < 5; cnt++) { + /* Set 902x in hardware TPI mode on and jump out of D3 state */ + ret = sii902x_write(client, 0xC7, 0x00); + if (ret < 0) + break; + } + if (0 != ret) + dev_err(&client->dev, "cound not find device\n"); + + return ret; +} + +static void sii902x_enable_source(struct sii902x_data *sii902x) +{ + struct i2c_client *client = sii902x_to_i2c(sii902x); + int val; + + sii902x_write(client, 0xBC, 0x01); + sii902x_write(client, 0xBD, 0x82); + val = sii902x_read(client, 0xBE); + val |= 0x1; + sii902x_write(client, 0xBE, val); +} + +static struct notifier_block nb = { + .notifier_call = sii902x_fb_event, +}; + +static int sii902x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); + int ret, err; + struct fb_info edid_fbi; + + if (!g_enable_hdmi) + return -EPERM; + + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) { + dev_err(&client->dev, "i2c_check_functionality error\n"); + return -ENODEV; + } + + sii902x = devm_kzalloc(&client->dev, sizeof(*sii902x), GFP_KERNEL); + if (!sii902x) + return -ENOMEM; + + sii902x->client = client; + i2c_set_clientdata(client, sii902x); + + err = sii902x_initialize(sii902x); + if (err) + return err; + + sii902x_chip_id(sii902x); + sii902x_power_up_tx(sii902x); + sii902x_enable_source(sii902x); + + /* try to read edid */ + if (sii902x_get_edid(&edid_fbi) < 0) + dev_warn(&client->dev, "Can not read edid\n"); + + if (client->irq) { + ret = devm_request_irq(&client->dev, client->irq, + sii902x_detect_handler, 0, + "SII902x_det", sii902x); + if (ret < 0) + dev_warn(&client->dev, + "cound not request det irq %d\n", + client->irq); + else { + INIT_DELAYED_WORK(&(sii902x->det_work), det_worker); + /*enable cable hot plug irq*/ + sii902x_write(client, 0x3C, 0x01); + } + ret = device_create_file(&client->dev, &dev_attr_fb_name); + if (ret < 0) + dev_warn(&client->dev, + "cound not create sys node for fb name\n"); + ret = device_create_file(&client->dev, &dev_attr_cable_state); + if (ret < 0) + dev_warn(&client->dev, + "cound not create sys node for cable state\n"); + } + + fb_register_client(&nb); + + return 0; +} + +static int sii902x_remove(struct i2c_client *client) +{ + fb_unregister_client(&nb); + sii902x_poweroff(); + return 0; +} + +static const struct i2c_device_id sii902x_id[] = { + { "sii902x", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, sii902x_id); + +static const struct of_device_id sii902x_dt_ids[] = { + { .compatible = "fsl,sii902x", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sii902x_dt_ids); + +static struct i2c_driver sii902x_i2c_driver = { + .driver = { + .name = "sii902x", + .owner = THIS_MODULE, + .of_match_table = sii902x_dt_ids, + }, + .probe = sii902x_probe, + .remove = sii902x_remove, + .id_table = sii902x_id, +}; +module_i2c_driver(sii902x_i2c_driver); + +static int __init enable_hdmi_setup(char *str) +{ + g_enable_hdmi = true; + + return 1; +} +__setup("hdmi", enable_hdmi_setup); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("SII902x DVI/HDMI driver"); +MODULE_LICENSE("GPL");