| Message ID | 1412658075-7929-1-git-send-email-jack.yoo@skyworksinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tuesday, October 07, 2014 2:01 PM, Gyungoh Yoo wrote: > If possible, please add more detailed commit message for this patch. > Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com> > --- > drivers/video/backlight/Kconfig | 10 + > drivers/video/backlight/Makefile | 1 + > drivers/video/backlight/sky81452-backlight.c | 347 +++++++++++++++++++++++++++ > 3 files changed, 358 insertions(+) > create mode 100644 drivers/video/backlight/sky81452-backlight.c > > diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig > index 8d03924..2586fdd 100644 > --- a/drivers/video/backlight/Kconfig > +++ b/drivers/video/backlight/Kconfig > @@ -409,6 +409,16 @@ config BACKLIGHT_PANDORA > If you have a Pandora console, say Y to enable the > backlight driver. > > +config BACKLIGHT_SKY81452 > + tristate "Backlight driver for SKY81452" > + depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452 > + help > + If you have a Skyworks SKY81452, say Y to enable the > + backlight driver. > + > + To compile this driver as a module, choose M here: the module will > + be called sky81452-backlight > + > config BACKLIGHT_TPS65217 > tristate "TPS65217 Backlight" > depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217 > diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile > index fcd50b73..d67073f 100644 > --- a/drivers/video/backlight/Makefile > +++ b/drivers/video/backlight/Makefile > @@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o > obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o > obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o > obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o > +obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o > obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o > obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o > obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o > diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452- > backlight.c > new file mode 100644 > index 0000000..101399d > --- /dev/null > +++ b/drivers/video/backlight/sky81452-backlight.c > @@ -0,0 +1,347 @@ > +/* > + * sky81452-backlight.c SKY81452 backlight driver > + * > + * Copyright 2014 Skyworks Solutions Inc. > + * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2, or (at your option) any > + * later version. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License along > + * with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > +#include <linux/of.h> > +#include <linux/err.h> > +#include <linux/gpio.h> > +#include <linux/of_gpio.h> > +#include <linux/regmap.h> > +#include <linux/backlight.h> > +#include <linux/sky81452-backlight.h> Please, re-order these headers alphabetically. It enhances the readability. > + > +/* registers */ > +#define SKY81452_REG0 0x00 > +#define SKY81452_REG1 0x01 > +#define SKY81452_REG2 0x02 > +#define SKY81452_REG4 0x04 > +#define SKY81452_REG5 0x05 > + > +/* bit mask */ > +#define SKY81452_CS 0xFF > +#define SKY81452_EN 0x3F > +#define SKY81452_IGPW 0x20 > +#define SKY81452_PWMMD 0x10 > +#define SKY81452_PHASE 0x08 > +#define SKY81452_ILIM 0x04 > +#define SKY81452_VSHRT 0x03 > +#define SKY81452_OCP 0x80 > +#define SKY81452_OTMP 0x40 > +#define SKY81452_SHRT 0x3F > +#define SKY81452_OPN 0x3F > + > +#define SKY81452_DEFAULT_NAME "lcd-backlight" > +#define SKY81452_MAX_BRIGHTNESS (SKY81452_CS + 1) > + > +#define CTZ(b) __builtin_ctz(b) > + > +static int sky81452_bl_update_status(struct backlight_device *bd) > +{ > + const struct sky81452_bl_platform_data *pdata = > + dev_get_platdata(bd->dev.parent); > + const unsigned int brightness = (unsigned int)bd->props.brightness; > + struct regmap *regmap = bl_get_data(bd); > + int ret; > + > + if (brightness > 0) { > + ret = regmap_write(regmap, SKY81452_REG0, brightness - 1); > + if (IS_ERR_VALUE(ret)) > + return ret; > + > + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, > + pdata->enable << CTZ(SKY81452_EN)); > + } > + > + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0); > +} > + > +static int sky81452_bl_get_brightness(struct backlight_device *bd) > +{ > + return bd->props.brightness; > +} > + > +static const struct backlight_ops sky81452_bl_ops = { > + .update_status = sky81452_bl_update_status, > + .get_brightness = sky81452_bl_get_brightness, > +}; > + > +static ssize_t sky81452_bl_store_enable(struct device *dev, > + struct device_attribute *attr, const char *buf, size_t count) > +{ > + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); > + unsigned long value; > + int ret; > + > + ret = kstrtoul(buf, 16, &value); > + if (IS_ERR_VALUE(ret)) > + return ret; > + > + ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, > + value << CTZ(SKY81452_EN)); > + if (IS_ERR_VALUE(ret)) > + return ret; > + > + return count; > +} > + > +static ssize_t sky81452_bl_show_open_short(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); > + unsigned int reg, value = 0; > + char tmp[3]; > + int i, ret; > + > + reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4; > + ret = regmap_read(regmap, reg, &value); > + if (IS_ERR_VALUE(ret)) > + return ret; > + > + if (value & SKY81452_SHRT) { > + *buf = 0; > + for (i = 0; i < 6; i++) { > + if (value & 0x01) { > + sprintf(tmp, "%d ", i + 1); > + strcat(buf, tmp); > + } > + value >>= 1; > + } > + strcat(buf, "\n"); > + } else > + strcpy(buf, "none\n"); Please add braces to 'else' statement. If only one branch of a conditional statement is a single statement. Braces are needed. if () { ... (multi lines) } else { ... } > + > + return strlen(buf); > +} > + > +static ssize_t sky81452_bl_show_fault(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); > + unsigned int value = 0; > + int ret; > + > + ret = regmap_read(regmap, SKY81452_REG4, &value); > + if (IS_ERR_VALUE(ret)) > + return ret; > + > + *buf = 0; > + > + if (value & SKY81452_OCP) > + strcat(buf, "over-current "); > + > + if (value & SKY81452_OTMP) > + strcat(buf, "over-temperature"); > + > + strcat(buf, "\n"); > + return strlen(buf); > +} > + > +static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable); > +static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL); > +static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL); > +static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL); > + > +static struct attribute *sky81452_bl_attribute[] = { > + &dev_attr_enable.attr, > + &dev_attr_open.attr, > + &dev_attr_short.attr, > + &dev_attr_fault.attr, > + NULL > +}; > + > +static const struct attribute_group sky81452_bl_attr_group = { > + .attrs = sky81452_bl_attribute, > +}; > + > +#ifdef CONFIG_OF > +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( > + struct device *dev) > +{ > + struct device_node *np = of_node_get(dev->of_node); > + struct sky81452_bl_platform_data *pdata; > + int ret; > + > + if (!np) { > + dev_err(dev, "backlight node not found"); > + return ERR_PTR(-ENODATA); > + } > + > + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); > + if (!pdata) { > + of_node_put(np); > + return ERR_PTR(-ENOMEM); > + } > + > + of_property_read_string(np, "name", &pdata->name); > + pdata->ignore_pwm = of_property_read_bool(np, "ignore-pwm"); > + pdata->dpwm_mode = of_property_read_bool(np, "dpwm-mode"); > + pdata->phase_shift = of_property_read_bool(np, "phase-shift"); > + > + pdata->gpio_enable = of_get_named_gpio(np, "gpio-enable", 0); > + if (IS_ERR_VALUE(pdata->gpio_enable)) > + pdata->gpio_enable = -1; > + > + ret = of_property_read_u32(np, "enable", &pdata->enable); > + if (IS_ERR_VALUE(ret)) > + pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN); > + > + ret = of_property_read_u32(np, "short-detection-threshold", > + &pdata->short_detection_threshold); > + if (IS_ERR_VALUE(ret)) > + pdata->short_detection_threshold = 7; > + > + ret = of_property_read_u32(np, "boost-current-limit", > + &pdata->boost_current_limit); > + if (IS_ERR_VALUE(ret)) > + pdata->boost_current_limit = 2750; > + > + of_node_put(np); > + return pdata; > +} > +#else > +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( > + struct device *dev) > +{ > + return ERR_PTR(-EINVAL); > +} > +#endif > + > +static int sky81452_bl_init_device(struct regmap *regmap, > + struct sky81452_bl_platform_data *pdata) > +{ > + unsigned int value; > + > + value = pdata->ignore_pwm ? SKY81452_IGPW : 0; > + value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0; > + value |= pdata->phase_shift ? 0 : SKY81452_PHASE; > + > + if (pdata->boost_current_limit == 2300) > + value |= SKY81452_ILIM; > + else if (pdata->boost_current_limit != 2720) > + return -EINVAL; > + > + if (pdata->short_detection_threshold < 4 || > + pdata->short_detection_threshold > 7) > + return -EINVAL; > + value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT); > + > + return regmap_write(regmap, SKY81452_REG2, value); > +} > + > +static int sky81452_bl_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct regmap *regmap = dev_get_drvdata(dev->parent); > + struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev); > + struct backlight_device *bd; > + struct backlight_properties props; > + const char *name; > + int ret; > + > + if (!pdata) { > + pdata = sky81452_bl_parse_dt(dev); > + if (IS_ERR(pdata)) > + return PTR_ERR(pdata); > + } > + > + if (pdata->gpio_enable >= 0) { > + ret = devm_gpio_request_one(dev, pdata->gpio_enable, > + GPIOF_OUT_INIT_HIGH, "sky81452-en"); > + if (IS_ERR_VALUE(ret)) { > + dev_err(dev, "failed to request GPIO. err=%d", ret); > + return ret; > + } > + } > + > + ret = sky81452_bl_init_device(regmap, pdata); > + if (IS_ERR_VALUE(ret)) { > + dev_err(dev, "failed to initialize. err=%d", ret); > + return ret; > + } > + > + memset(&props, 0, sizeof(props)); > + props.max_brightness = SKY81452_MAX_BRIGHTNESS, > + name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME; > + bd = devm_backlight_device_register(dev, name, dev, regmap, > + &sky81452_bl_ops, &props); > + if (IS_ERR(bd)) { > + dev_err(dev, "failed to register. err=%ld", PTR_ERR(bd)); > + return PTR_ERR(bd); > + } > + > + platform_set_drvdata(pdev, bd); > + > + ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group); > + if (IS_ERR_VALUE(ret)) { > + dev_err(dev, "failed to create attribute. err=%d", ret); > + goto err; > + } > + > + return ret; > +err: > + backlight_device_unregister(bd); This backlight_device_unregister() is NOT necessary. This is because backlight_device_unregister will be called automatically, when devm_backlight_device_register() is used and error returns. > + return ret; > +} > + > +static int sky81452_bl_remove(struct platform_device *pdev) > +{ > + const struct sky81452_bl_platform_data *pdata = > + dev_get_platdata(&pdev->dev); > + struct backlight_device *bd = platform_get_drvdata(pdev); > + > + sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group); > + > + bd->props.power = FB_BLANK_UNBLANK; > + bd->props.brightness = 0; > + backlight_update_status(bd); > + > + if (pdata->gpio_enable >= 0) > + gpio_set_value_cansleep(pdata->gpio_enable, 0); > + > + return 0; > +} > + > +#ifdef CONFIG_OF > +static const struct of_device_id sky81452_bl_of_match[] = { > + { .compatible = "skyworks,sky81452-backlight", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, sky81452_bl_of_match); > +#endif > + > +static struct platform_driver sky81452_bl_driver = { > + .driver = { > + .name = "sky81452-backlight", > + .of_match_table = of_match_ptr(sky81452_bl_of_match), > + }, > + .probe = sky81452_bl_probe, > + .remove = sky81452_bl_remove, > +}; > + > +module_platform_driver(sky81452_bl_driver); > + > +MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver"); > +MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>"); > +MODULE_LICENSE("GPL"); How about using 'GPL v2'? > +MODULE_VERSION("1.2"); > -- > 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Oct 08, 2014 at 10:03:57AM +0900, Jingoo Han wrote: > On Tuesday, October 07, 2014 2:01 PM, Gyungoh Yoo wrote: > > > > If possible, please add more detailed commit message for this patch. > > > Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com> > > --- > > drivers/video/backlight/Kconfig | 10 + > > drivers/video/backlight/Makefile | 1 + > > drivers/video/backlight/sky81452-backlight.c | 347 +++++++++++++++++++++++++++ > > 3 files changed, 358 insertions(+) > > create mode 100644 drivers/video/backlight/sky81452-backlight.c > > > > diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig > > index 8d03924..2586fdd 100644 > > --- a/drivers/video/backlight/Kconfig > > +++ b/drivers/video/backlight/Kconfig > > @@ -409,6 +409,16 @@ config BACKLIGHT_PANDORA > > If you have a Pandora console, say Y to enable the > > backlight driver. > > > > +config BACKLIGHT_SKY81452 > > + tristate "Backlight driver for SKY81452" > > + depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452 > > + help > > + If you have a Skyworks SKY81452, say Y to enable the > > + backlight driver. > > + > > + To compile this driver as a module, choose M here: the module will > > + be called sky81452-backlight > > + > > config BACKLIGHT_TPS65217 > > tristate "TPS65217 Backlight" > > depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217 > > diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile > > index fcd50b73..d67073f 100644 > > --- a/drivers/video/backlight/Makefile > > +++ b/drivers/video/backlight/Makefile > > @@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o > > obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o > > obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o > > obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o > > +obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o > > obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o > > obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o > > obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o > > diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452- > > backlight.c > > new file mode 100644 > > index 0000000..101399d > > --- /dev/null > > +++ b/drivers/video/backlight/sky81452-backlight.c > > @@ -0,0 +1,347 @@ > > +/* > > + * sky81452-backlight.c SKY81452 backlight driver > > + * > > + * Copyright 2014 Skyworks Solutions Inc. > > + * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> > > + * > > + * This program is free software; you can redistribute it and/or modify it > > + * under the terms of the GNU General Public License as published by the > > + * Free Software Foundation; either version 2, or (at your option) any > > + * later version. > > + * > > + * This program is distributed in the hope that it will be useful, but > > + * WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > > + * General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License along > > + * with this program; if not, see <http://www.gnu.org/licenses/>. > > + */ > > + > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/init.h> > > +#include <linux/platform_device.h> > > +#include <linux/slab.h> > > +#include <linux/of.h> > > +#include <linux/err.h> > > +#include <linux/gpio.h> > > +#include <linux/of_gpio.h> > > +#include <linux/regmap.h> > > +#include <linux/backlight.h> > > +#include <linux/sky81452-backlight.h> > > Please, re-order these headers alphabetically. > It enhances the readability. I see. > > > + > > +/* registers */ > > +#define SKY81452_REG0 0x00 > > +#define SKY81452_REG1 0x01 > > +#define SKY81452_REG2 0x02 > > +#define SKY81452_REG4 0x04 > > +#define SKY81452_REG5 0x05 > > + > > +/* bit mask */ > > +#define SKY81452_CS 0xFF > > +#define SKY81452_EN 0x3F > > +#define SKY81452_IGPW 0x20 > > +#define SKY81452_PWMMD 0x10 > > +#define SKY81452_PHASE 0x08 > > +#define SKY81452_ILIM 0x04 > > +#define SKY81452_VSHRT 0x03 > > +#define SKY81452_OCP 0x80 > > +#define SKY81452_OTMP 0x40 > > +#define SKY81452_SHRT 0x3F > > +#define SKY81452_OPN 0x3F > > + > > +#define SKY81452_DEFAULT_NAME "lcd-backlight" > > +#define SKY81452_MAX_BRIGHTNESS (SKY81452_CS + 1) > > + > > +#define CTZ(b) __builtin_ctz(b) > > + > > +static int sky81452_bl_update_status(struct backlight_device *bd) > > +{ > > + const struct sky81452_bl_platform_data *pdata = > > + dev_get_platdata(bd->dev.parent); > > + const unsigned int brightness = (unsigned int)bd->props.brightness; > > + struct regmap *regmap = bl_get_data(bd); > > + int ret; > > + > > + if (brightness > 0) { > > + ret = regmap_write(regmap, SKY81452_REG0, brightness - 1); > > + if (IS_ERR_VALUE(ret)) > > + return ret; > > + > > + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, > > + pdata->enable << CTZ(SKY81452_EN)); > > + } > > + > > + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0); > > +} > > + > > +static int sky81452_bl_get_brightness(struct backlight_device *bd) > > +{ > > + return bd->props.brightness; > > +} > > + > > +static const struct backlight_ops sky81452_bl_ops = { > > + .update_status = sky81452_bl_update_status, > > + .get_brightness = sky81452_bl_get_brightness, > > +}; > > + > > +static ssize_t sky81452_bl_store_enable(struct device *dev, > > + struct device_attribute *attr, const char *buf, size_t count) > > +{ > > + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); > > + unsigned long value; > > + int ret; > > + > > + ret = kstrtoul(buf, 16, &value); > > + if (IS_ERR_VALUE(ret)) > > + return ret; > > + > > + ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, > > + value << CTZ(SKY81452_EN)); > > + if (IS_ERR_VALUE(ret)) > > + return ret; > > + > > + return count; > > +} > > + > > +static ssize_t sky81452_bl_show_open_short(struct device *dev, > > + struct device_attribute *attr, char *buf) > > +{ > > + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); > > + unsigned int reg, value = 0; > > + char tmp[3]; > > + int i, ret; > > + > > + reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4; > > + ret = regmap_read(regmap, reg, &value); > > + if (IS_ERR_VALUE(ret)) > > + return ret; > > + > > + if (value & SKY81452_SHRT) { > > + *buf = 0; > > + for (i = 0; i < 6; i++) { > > + if (value & 0x01) { > > + sprintf(tmp, "%d ", i + 1); > > + strcat(buf, tmp); > > + } > > + value >>= 1; > > + } > > + strcat(buf, "\n"); > > + } else > > + strcpy(buf, "none\n"); > > Please add braces to 'else' statement. > > If only one branch of a conditional statement is a single > statement. Braces are needed. > > if () { > ... (multi lines) > } else { > ... > } I see. > > > > + > > + return strlen(buf); > > +} > > + > > +static ssize_t sky81452_bl_show_fault(struct device *dev, > > + struct device_attribute *attr, char *buf) > > +{ > > + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); > > + unsigned int value = 0; > > + int ret; > > + > > + ret = regmap_read(regmap, SKY81452_REG4, &value); > > + if (IS_ERR_VALUE(ret)) > > + return ret; > > + > > + *buf = 0; > > + > > + if (value & SKY81452_OCP) > > + strcat(buf, "over-current "); > > + > > + if (value & SKY81452_OTMP) > > + strcat(buf, "over-temperature"); > > + > > + strcat(buf, "\n"); > > + return strlen(buf); > > +} > > + > > +static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable); > > +static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL); > > +static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL); > > +static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL); > > + > > +static struct attribute *sky81452_bl_attribute[] = { > > + &dev_attr_enable.attr, > > + &dev_attr_open.attr, > > + &dev_attr_short.attr, > > + &dev_attr_fault.attr, > > + NULL > > +}; > > + > > +static const struct attribute_group sky81452_bl_attr_group = { > > + .attrs = sky81452_bl_attribute, > > +}; > > + > > +#ifdef CONFIG_OF > > +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( > > + struct device *dev) > > +{ > > + struct device_node *np = of_node_get(dev->of_node); > > + struct sky81452_bl_platform_data *pdata; > > + int ret; > > + > > + if (!np) { > > + dev_err(dev, "backlight node not found"); > > + return ERR_PTR(-ENODATA); > > + } > > + > > + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); > > + if (!pdata) { > > + of_node_put(np); > > + return ERR_PTR(-ENOMEM); > > + } > > + > > + of_property_read_string(np, "name", &pdata->name); > > + pdata->ignore_pwm = of_property_read_bool(np, "ignore-pwm"); > > + pdata->dpwm_mode = of_property_read_bool(np, "dpwm-mode"); > > + pdata->phase_shift = of_property_read_bool(np, "phase-shift"); > > + > > + pdata->gpio_enable = of_get_named_gpio(np, "gpio-enable", 0); > > + if (IS_ERR_VALUE(pdata->gpio_enable)) > > + pdata->gpio_enable = -1; > > + > > + ret = of_property_read_u32(np, "enable", &pdata->enable); > > + if (IS_ERR_VALUE(ret)) > > + pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN); > > + > > + ret = of_property_read_u32(np, "short-detection-threshold", > > + &pdata->short_detection_threshold); > > + if (IS_ERR_VALUE(ret)) > > + pdata->short_detection_threshold = 7; > > + > > + ret = of_property_read_u32(np, "boost-current-limit", > > + &pdata->boost_current_limit); > > + if (IS_ERR_VALUE(ret)) > > + pdata->boost_current_limit = 2750; > > + > > + of_node_put(np); > > + return pdata; > > +} > > +#else > > +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( > > + struct device *dev) > > +{ > > + return ERR_PTR(-EINVAL); > > +} > > +#endif > > + > > +static int sky81452_bl_init_device(struct regmap *regmap, > > + struct sky81452_bl_platform_data *pdata) > > +{ > > + unsigned int value; > > + > > + value = pdata->ignore_pwm ? SKY81452_IGPW : 0; > > + value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0; > > + value |= pdata->phase_shift ? 0 : SKY81452_PHASE; > > + > > + if (pdata->boost_current_limit == 2300) > > + value |= SKY81452_ILIM; > > + else if (pdata->boost_current_limit != 2720) > > + return -EINVAL; > > + > > + if (pdata->short_detection_threshold < 4 || > > + pdata->short_detection_threshold > 7) > > + return -EINVAL; > > + value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT); > > + > > + return regmap_write(regmap, SKY81452_REG2, value); > > +} > > + > > +static int sky81452_bl_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct regmap *regmap = dev_get_drvdata(dev->parent); > > + struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev); > > + struct backlight_device *bd; > > + struct backlight_properties props; > > + const char *name; > > + int ret; > > + > > + if (!pdata) { > > + pdata = sky81452_bl_parse_dt(dev); > > + if (IS_ERR(pdata)) > > + return PTR_ERR(pdata); > > + } > > + > > + if (pdata->gpio_enable >= 0) { > > + ret = devm_gpio_request_one(dev, pdata->gpio_enable, > > + GPIOF_OUT_INIT_HIGH, "sky81452-en"); > > + if (IS_ERR_VALUE(ret)) { > > + dev_err(dev, "failed to request GPIO. err=%d", ret); > > + return ret; > > + } > > + } > > + > > + ret = sky81452_bl_init_device(regmap, pdata); > > + if (IS_ERR_VALUE(ret)) { > > + dev_err(dev, "failed to initialize. err=%d", ret); > > + return ret; > > + } > > + > > + memset(&props, 0, sizeof(props)); > > + props.max_brightness = SKY81452_MAX_BRIGHTNESS, > > + name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME; > > + bd = devm_backlight_device_register(dev, name, dev, regmap, > > + &sky81452_bl_ops, &props); > > + if (IS_ERR(bd)) { > > + dev_err(dev, "failed to register. err=%ld", PTR_ERR(bd)); > > + return PTR_ERR(bd); > > + } > > + > > + platform_set_drvdata(pdev, bd); > > + > > + ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group); > > + if (IS_ERR_VALUE(ret)) { > > + dev_err(dev, "failed to create attribute. err=%d", ret); > > + goto err; > > + } > > + > > + return ret; > > +err: > > + backlight_device_unregister(bd); > > This backlight_device_unregister() is NOT necessary. > This is because backlight_device_unregister will be called > automatically, when devm_backlight_device_register() is used > and error returns. I see. > > > + return ret; > > +} > > + > > +static int sky81452_bl_remove(struct platform_device *pdev) > > +{ > > + const struct sky81452_bl_platform_data *pdata = > > + dev_get_platdata(&pdev->dev); > > + struct backlight_device *bd = platform_get_drvdata(pdev); > > + > > + sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group); > > + > > + bd->props.power = FB_BLANK_UNBLANK; > > + bd->props.brightness = 0; > > + backlight_update_status(bd); > > + > > + if (pdata->gpio_enable >= 0) > > + gpio_set_value_cansleep(pdata->gpio_enable, 0); > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_OF > > +static const struct of_device_id sky81452_bl_of_match[] = { > > + { .compatible = "skyworks,sky81452-backlight", }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, sky81452_bl_of_match); > > +#endif > > + > > +static struct platform_driver sky81452_bl_driver = { > > + .driver = { > > + .name = "sky81452-backlight", > > + .of_match_table = of_match_ptr(sky81452_bl_of_match), > > + }, > > + .probe = sky81452_bl_probe, > > + .remove = sky81452_bl_remove, > > +}; > > + > > +module_platform_driver(sky81452_bl_driver); > > + > > +MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver"); > > +MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>"); > > +MODULE_LICENSE("GPL"); > > How about using 'GPL v2'? I will change it. Thanks you so much for your review. > > > +MODULE_VERSION("1.2"); > > -- > > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 8d03924..2586fdd 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -409,6 +409,16 @@ config BACKLIGHT_PANDORA If you have a Pandora console, say Y to enable the backlight driver. +config BACKLIGHT_SKY81452 + tristate "Backlight driver for SKY81452" + depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452 + help + If you have a Skyworks SKY81452, say Y to enable the + backlight driver. + + To compile this driver as a module, choose M here: the module will + be called sky81452-backlight + config BACKLIGHT_TPS65217 tristate "TPS65217 Backlight" depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217 diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index fcd50b73..d67073f 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o +obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c new file mode 100644 index 0000000..101399d --- /dev/null +++ b/drivers/video/backlight/sky81452-backlight.c @@ -0,0 +1,347 @@ +/* + * sky81452-backlight.c SKY81452 backlight driver + * + * Copyright 2014 Skyworks Solutions Inc. + * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/backlight.h> +#include <linux/sky81452-backlight.h> + +/* registers */ +#define SKY81452_REG0 0x00 +#define SKY81452_REG1 0x01 +#define SKY81452_REG2 0x02 +#define SKY81452_REG4 0x04 +#define SKY81452_REG5 0x05 + +/* bit mask */ +#define SKY81452_CS 0xFF +#define SKY81452_EN 0x3F +#define SKY81452_IGPW 0x20 +#define SKY81452_PWMMD 0x10 +#define SKY81452_PHASE 0x08 +#define SKY81452_ILIM 0x04 +#define SKY81452_VSHRT 0x03 +#define SKY81452_OCP 0x80 +#define SKY81452_OTMP 0x40 +#define SKY81452_SHRT 0x3F +#define SKY81452_OPN 0x3F + +#define SKY81452_DEFAULT_NAME "lcd-backlight" +#define SKY81452_MAX_BRIGHTNESS (SKY81452_CS + 1) + +#define CTZ(b) __builtin_ctz(b) + +static int sky81452_bl_update_status(struct backlight_device *bd) +{ + const struct sky81452_bl_platform_data *pdata = + dev_get_platdata(bd->dev.parent); + const unsigned int brightness = (unsigned int)bd->props.brightness; + struct regmap *regmap = bl_get_data(bd); + int ret; + + if (brightness > 0) { + ret = regmap_write(regmap, SKY81452_REG0, brightness - 1); + if (IS_ERR_VALUE(ret)) + return ret; + + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, + pdata->enable << CTZ(SKY81452_EN)); + } + + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0); +} + +static int sky81452_bl_get_brightness(struct backlight_device *bd) +{ + return bd->props.brightness; +} + +static const struct backlight_ops sky81452_bl_ops = { + .update_status = sky81452_bl_update_status, + .get_brightness = sky81452_bl_get_brightness, +}; + +static ssize_t sky81452_bl_store_enable(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); + unsigned long value; + int ret; + + ret = kstrtoul(buf, 16, &value); + if (IS_ERR_VALUE(ret)) + return ret; + + ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, + value << CTZ(SKY81452_EN)); + if (IS_ERR_VALUE(ret)) + return ret; + + return count; +} + +static ssize_t sky81452_bl_show_open_short(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); + unsigned int reg, value = 0; + char tmp[3]; + int i, ret; + + reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4; + ret = regmap_read(regmap, reg, &value); + if (IS_ERR_VALUE(ret)) + return ret; + + if (value & SKY81452_SHRT) { + *buf = 0; + for (i = 0; i < 6; i++) { + if (value & 0x01) { + sprintf(tmp, "%d ", i + 1); + strcat(buf, tmp); + } + value >>= 1; + } + strcat(buf, "\n"); + } else + strcpy(buf, "none\n"); + + return strlen(buf); +} + +static ssize_t sky81452_bl_show_fault(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); + unsigned int value = 0; + int ret; + + ret = regmap_read(regmap, SKY81452_REG4, &value); + if (IS_ERR_VALUE(ret)) + return ret; + + *buf = 0; + + if (value & SKY81452_OCP) + strcat(buf, "over-current "); + + if (value & SKY81452_OTMP) + strcat(buf, "over-temperature"); + + strcat(buf, "\n"); + return strlen(buf); +} + +static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable); +static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL); +static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL); +static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL); + +static struct attribute *sky81452_bl_attribute[] = { + &dev_attr_enable.attr, + &dev_attr_open.attr, + &dev_attr_short.attr, + &dev_attr_fault.attr, + NULL +}; + +static const struct attribute_group sky81452_bl_attr_group = { + .attrs = sky81452_bl_attribute, +}; + +#ifdef CONFIG_OF +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( + struct device *dev) +{ + struct device_node *np = of_node_get(dev->of_node); + struct sky81452_bl_platform_data *pdata; + int ret; + + if (!np) { + dev_err(dev, "backlight node not found"); + return ERR_PTR(-ENODATA); + } + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + of_node_put(np); + return ERR_PTR(-ENOMEM); + } + + of_property_read_string(np, "name", &pdata->name); + pdata->ignore_pwm = of_property_read_bool(np, "ignore-pwm"); + pdata->dpwm_mode = of_property_read_bool(np, "dpwm-mode"); + pdata->phase_shift = of_property_read_bool(np, "phase-shift"); + + pdata->gpio_enable = of_get_named_gpio(np, "gpio-enable", 0); + if (IS_ERR_VALUE(pdata->gpio_enable)) + pdata->gpio_enable = -1; + + ret = of_property_read_u32(np, "enable", &pdata->enable); + if (IS_ERR_VALUE(ret)) + pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN); + + ret = of_property_read_u32(np, "short-detection-threshold", + &pdata->short_detection_threshold); + if (IS_ERR_VALUE(ret)) + pdata->short_detection_threshold = 7; + + ret = of_property_read_u32(np, "boost-current-limit", + &pdata->boost_current_limit); + if (IS_ERR_VALUE(ret)) + pdata->boost_current_limit = 2750; + + of_node_put(np); + return pdata; +} +#else +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( + struct device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif + +static int sky81452_bl_init_device(struct regmap *regmap, + struct sky81452_bl_platform_data *pdata) +{ + unsigned int value; + + value = pdata->ignore_pwm ? SKY81452_IGPW : 0; + value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0; + value |= pdata->phase_shift ? 0 : SKY81452_PHASE; + + if (pdata->boost_current_limit == 2300) + value |= SKY81452_ILIM; + else if (pdata->boost_current_limit != 2720) + return -EINVAL; + + if (pdata->short_detection_threshold < 4 || + pdata->short_detection_threshold > 7) + return -EINVAL; + value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT); + + return regmap_write(regmap, SKY81452_REG2, value); +} + +static int sky81452_bl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap = dev_get_drvdata(dev->parent); + struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev); + struct backlight_device *bd; + struct backlight_properties props; + const char *name; + int ret; + + if (!pdata) { + pdata = sky81452_bl_parse_dt(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } + + if (pdata->gpio_enable >= 0) { + ret = devm_gpio_request_one(dev, pdata->gpio_enable, + GPIOF_OUT_INIT_HIGH, "sky81452-en"); + if (IS_ERR_VALUE(ret)) { + dev_err(dev, "failed to request GPIO. err=%d", ret); + return ret; + } + } + + ret = sky81452_bl_init_device(regmap, pdata); + if (IS_ERR_VALUE(ret)) { + dev_err(dev, "failed to initialize. err=%d", ret); + return ret; + } + + memset(&props, 0, sizeof(props)); + props.max_brightness = SKY81452_MAX_BRIGHTNESS, + name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME; + bd = devm_backlight_device_register(dev, name, dev, regmap, + &sky81452_bl_ops, &props); + if (IS_ERR(bd)) { + dev_err(dev, "failed to register. err=%ld", PTR_ERR(bd)); + return PTR_ERR(bd); + } + + platform_set_drvdata(pdev, bd); + + ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group); + if (IS_ERR_VALUE(ret)) { + dev_err(dev, "failed to create attribute. err=%d", ret); + goto err; + } + + return ret; +err: + backlight_device_unregister(bd); + return ret; +} + +static int sky81452_bl_remove(struct platform_device *pdev) +{ + const struct sky81452_bl_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct backlight_device *bd = platform_get_drvdata(pdev); + + sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group); + + bd->props.power = FB_BLANK_UNBLANK; + bd->props.brightness = 0; + backlight_update_status(bd); + + if (pdata->gpio_enable >= 0) + gpio_set_value_cansleep(pdata->gpio_enable, 0); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id sky81452_bl_of_match[] = { + { .compatible = "skyworks,sky81452-backlight", }, + { } +}; +MODULE_DEVICE_TABLE(of, sky81452_bl_of_match); +#endif + +static struct platform_driver sky81452_bl_driver = { + .driver = { + .name = "sky81452-backlight", + .of_match_table = of_match_ptr(sky81452_bl_of_match), + }, + .probe = sky81452_bl_probe, + .remove = sky81452_bl_remove, +}; + +module_platform_driver(sky81452_bl_driver); + +MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver"); +MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.2");
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com> --- drivers/video/backlight/Kconfig | 10 + drivers/video/backlight/Makefile | 1 + drivers/video/backlight/sky81452-backlight.c | 347 +++++++++++++++++++++++++++ 3 files changed, 358 insertions(+) create mode 100644 drivers/video/backlight/sky81452-backlight.c