diff mbox

[1/4] backlight/lp855x: Remove stale code from lp855x.h

Message ID 1417805069-20441-1-git-send-email-seanpaul@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Sean Paul Dec. 5, 2014, 6:44 p.m. UTC 
These aren't used by anyone, remove them.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 include/linux/platform_data/lp855x.h | 100 -----------------------------------
 1 file changed, 100 deletions(-)

Comments

Jingoo Han Dec. 8, 2014, 11:40 a.m. UTC | #1 
On Saturday, December 06, 2014 3:44 AM, Sean Paul wrote:
> 
> These aren't used by anyone, remove them.
> 
> Signed-off-by: Sean Paul <seanpaul@chromium.org>

Acked-by: Jingoo Han <jg1.han@samsung.com>

Best regards,
Jingoo Han

> ---
>  include/linux/platform_data/lp855x.h | 100 -----------------------------------
>  1 file changed, 100 deletions(-)
> 
> diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
> index 9c7fd1e..9e3ac3c 100644
> --- a/include/linux/platform_data/lp855x.h
> +++ b/include/linux/platform_data/lp855x.h
> @@ -12,65 +12,6 @@
>  #ifndef _LP855X_H
>  #define _LP855X_H
> 
> -#define BL_CTL_SHFT	(0)
> -#define BRT_MODE_SHFT	(1)
> -#define BRT_MODE_MASK	(0x06)
> -
> -/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */
> -#define ENABLE_BL	(1)
> -#define DISABLE_BL	(0)
> -
> -#define I2C_CONFIG(id)	id ## _I2C_CONFIG
> -#define PWM_CONFIG(id)	id ## _PWM_CONFIG
> -
> -/* DEVICE CONTROL register - LP8550 */
> -#define LP8550_PWM_CONFIG	(LP8550_PWM_ONLY << BRT_MODE_SHFT)
> -#define LP8550_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
> -				(LP8550_I2C_ONLY << BRT_MODE_SHFT))
> -
> -/* DEVICE CONTROL register - LP8551 */
> -#define LP8551_PWM_CONFIG	LP8550_PWM_CONFIG
> -#define LP8551_I2C_CONFIG	LP8550_I2C_CONFIG
> -
> -/* DEVICE CONTROL register - LP8552 */
> -#define LP8552_PWM_CONFIG	LP8550_PWM_CONFIG
> -#define LP8552_I2C_CONFIG	LP8550_I2C_CONFIG
> -
> -/* DEVICE CONTROL register - LP8553 */
> -#define LP8553_PWM_CONFIG	LP8550_PWM_CONFIG
> -#define LP8553_I2C_CONFIG	LP8550_I2C_CONFIG
> -
> -/* CONFIG register - LP8555 */
> -#define LP8555_PWM_STANDBY	BIT(7)
> -#define LP8555_PWM_FILTER	BIT(6)
> -#define LP8555_RELOAD_EPROM	BIT(3)	/* use it if EPROMs should be reset
> -					   when the backlight turns on */
> -#define LP8555_OFF_OPENLEDS	BIT(2)
> -#define LP8555_PWM_CONFIG	LP8555_PWM_ONLY
> -#define LP8555_I2C_CONFIG	LP8555_I2C_ONLY
> -#define LP8555_COMB1_CONFIG	LP8555_COMBINED1
> -#define LP8555_COMB2_CONFIG	LP8555_COMBINED2
> -
> -/* DEVICE CONTROL register - LP8556 */
> -#define LP8556_PWM_CONFIG	(LP8556_PWM_ONLY << BRT_MODE_SHFT)
> -#define LP8556_COMB1_CONFIG	(LP8556_COMBINED1 << BRT_MODE_SHFT)
> -#define LP8556_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
> -				(LP8556_I2C_ONLY << BRT_MODE_SHFT))
> -#define LP8556_COMB2_CONFIG	(LP8556_COMBINED2 << BRT_MODE_SHFT)
> -#define LP8556_FAST_CONFIG	BIT(7) /* use it if EPROMs should be maintained
> -					  when exiting the low power mode */
> -
> -/* CONFIG register - LP8557 */
> -#define LP8557_PWM_STANDBY	BIT(7)
> -#define LP8557_PWM_FILTER	BIT(6)
> -#define LP8557_RELOAD_EPROM	BIT(3)	/* use it if EPROMs should be reset
> -					   when the backlight turns on */
> -#define LP8557_OFF_OPENLEDS	BIT(2)
> -#define LP8557_PWM_CONFIG	LP8557_PWM_ONLY
> -#define LP8557_I2C_CONFIG	LP8557_I2C_ONLY
> -#define LP8557_COMB1_CONFIG	LP8557_COMBINED1
> -#define LP8557_COMB2_CONFIG	LP8557_COMBINED2
> -
>  enum lp855x_chip_id {
>  	LP8550,
>  	LP8551,
> @@ -81,47 +22,6 @@ enum lp855x_chip_id {
>  	LP8557,
>  };
> 
> -enum lp8550_brighntess_source {
> -	LP8550_PWM_ONLY,
> -	LP8550_I2C_ONLY = 2,
> -};
> -
> -enum lp8551_brighntess_source {
> -	LP8551_PWM_ONLY = LP8550_PWM_ONLY,
> -	LP8551_I2C_ONLY = LP8550_I2C_ONLY,
> -};
> -
> -enum lp8552_brighntess_source {
> -	LP8552_PWM_ONLY = LP8550_PWM_ONLY,
> -	LP8552_I2C_ONLY = LP8550_I2C_ONLY,
> -};
> -
> -enum lp8553_brighntess_source {
> -	LP8553_PWM_ONLY = LP8550_PWM_ONLY,
> -	LP8553_I2C_ONLY = LP8550_I2C_ONLY,
> -};
> -
> -enum lp8555_brightness_source {
> -	LP8555_PWM_ONLY,
> -	LP8555_I2C_ONLY,
> -	LP8555_COMBINED1,	/* Brightness register with shaped PWM */
> -	LP8555_COMBINED2,	/* PWM with shaped brightness register */
> -};
> -
> -enum lp8556_brightness_source {
> -	LP8556_PWM_ONLY,
> -	LP8556_COMBINED1,	/* pwm + i2c before the shaper block */
> -	LP8556_I2C_ONLY,
> -	LP8556_COMBINED2,	/* pwm + i2c after the shaper block */
> -};
> -
> -enum lp8557_brightness_source {
> -	LP8557_PWM_ONLY,
> -	LP8557_I2C_ONLY,
> -	LP8557_COMBINED1,	/* pwm + i2c after the shaper block */
> -	LP8557_COMBINED2,	/* pwm + i2c before the shaper block */
> -};
> -
>  struct lp855x_rom_data {
>  	u8 addr;
>  	u8 val;
> --
> 2.2.0.rc0.207.ga3a616c

--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
index 9c7fd1e..9e3ac3c 100644
--- a/include/linux/platform_data/lp855x.h
+++ b/include/linux/platform_data/lp855x.h
@@ -12,65 +12,6 @@ 
 #ifndef _LP855X_H
 #define _LP855X_H
 
-#define BL_CTL_SHFT	(0)
-#define BRT_MODE_SHFT	(1)
-#define BRT_MODE_MASK	(0x06)
-
-/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */
-#define ENABLE_BL	(1)
-#define DISABLE_BL	(0)
-
-#define I2C_CONFIG(id)	id ## _I2C_CONFIG
-#define PWM_CONFIG(id)	id ## _PWM_CONFIG
-
-/* DEVICE CONTROL register - LP8550 */
-#define LP8550_PWM_CONFIG	(LP8550_PWM_ONLY << BRT_MODE_SHFT)
-#define LP8550_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
-				(LP8550_I2C_ONLY << BRT_MODE_SHFT))
-
-/* DEVICE CONTROL register - LP8551 */
-#define LP8551_PWM_CONFIG	LP8550_PWM_CONFIG
-#define LP8551_I2C_CONFIG	LP8550_I2C_CONFIG
-
-/* DEVICE CONTROL register - LP8552 */
-#define LP8552_PWM_CONFIG	LP8550_PWM_CONFIG
-#define LP8552_I2C_CONFIG	LP8550_I2C_CONFIG
-
-/* DEVICE CONTROL register - LP8553 */
-#define LP8553_PWM_CONFIG	LP8550_PWM_CONFIG
-#define LP8553_I2C_CONFIG	LP8550_I2C_CONFIG
-
-/* CONFIG register - LP8555 */
-#define LP8555_PWM_STANDBY	BIT(7)
-#define LP8555_PWM_FILTER	BIT(6)
-#define LP8555_RELOAD_EPROM	BIT(3)	/* use it if EPROMs should be reset
-					   when the backlight turns on */
-#define LP8555_OFF_OPENLEDS	BIT(2)
-#define LP8555_PWM_CONFIG	LP8555_PWM_ONLY
-#define LP8555_I2C_CONFIG	LP8555_I2C_ONLY
-#define LP8555_COMB1_CONFIG	LP8555_COMBINED1
-#define LP8555_COMB2_CONFIG	LP8555_COMBINED2
-
-/* DEVICE CONTROL register - LP8556 */
-#define LP8556_PWM_CONFIG	(LP8556_PWM_ONLY << BRT_MODE_SHFT)
-#define LP8556_COMB1_CONFIG	(LP8556_COMBINED1 << BRT_MODE_SHFT)
-#define LP8556_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
-				(LP8556_I2C_ONLY << BRT_MODE_SHFT))
-#define LP8556_COMB2_CONFIG	(LP8556_COMBINED2 << BRT_MODE_SHFT)
-#define LP8556_FAST_CONFIG	BIT(7) /* use it if EPROMs should be maintained
-					  when exiting the low power mode */
-
-/* CONFIG register - LP8557 */
-#define LP8557_PWM_STANDBY	BIT(7)
-#define LP8557_PWM_FILTER	BIT(6)
-#define LP8557_RELOAD_EPROM	BIT(3)	/* use it if EPROMs should be reset
-					   when the backlight turns on */
-#define LP8557_OFF_OPENLEDS	BIT(2)
-#define LP8557_PWM_CONFIG	LP8557_PWM_ONLY
-#define LP8557_I2C_CONFIG	LP8557_I2C_ONLY
-#define LP8557_COMB1_CONFIG	LP8557_COMBINED1
-#define LP8557_COMB2_CONFIG	LP8557_COMBINED2
-
 enum lp855x_chip_id {
 	LP8550,
 	LP8551,
@@ -81,47 +22,6 @@  enum lp855x_chip_id {
 	LP8557,
 };
 
-enum lp8550_brighntess_source {
-	LP8550_PWM_ONLY,
-	LP8550_I2C_ONLY = 2,
-};
-
-enum lp8551_brighntess_source {
-	LP8551_PWM_ONLY = LP8550_PWM_ONLY,
-	LP8551_I2C_ONLY = LP8550_I2C_ONLY,
-};
-
-enum lp8552_brighntess_source {
-	LP8552_PWM_ONLY = LP8550_PWM_ONLY,
-	LP8552_I2C_ONLY = LP8550_I2C_ONLY,
-};
-
-enum lp8553_brighntess_source {
-	LP8553_PWM_ONLY = LP8550_PWM_ONLY,
-	LP8553_I2C_ONLY = LP8550_I2C_ONLY,
-};
-
-enum lp8555_brightness_source {
-	LP8555_PWM_ONLY,
-	LP8555_I2C_ONLY,
-	LP8555_COMBINED1,	/* Brightness register with shaped PWM */
-	LP8555_COMBINED2,	/* PWM with shaped brightness register */
-};
-
-enum lp8556_brightness_source {
-	LP8556_PWM_ONLY,
-	LP8556_COMBINED1,	/* pwm + i2c before the shaper block */
-	LP8556_I2C_ONLY,
-	LP8556_COMBINED2,	/* pwm + i2c after the shaper block */
-};
-
-enum lp8557_brightness_source {
-	LP8557_PWM_ONLY,
-	LP8557_I2C_ONLY,
-	LP8557_COMBINED1,	/* pwm + i2c after the shaper block */
-	LP8557_COMBINED2,	/* pwm + i2c before the shaper block */
-};
-
 struct lp855x_rom_data {
 	u8 addr;
 	u8 val;