@@ -29,33 +29,10 @@ struct panel_drv_data {
int hpd_gpio;
struct omap_video_timings timings;
-
- struct completion hpd_completion;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
-static irqreturn_t tpd_hpd_irq_handler(int irq, void *data)
-{
- struct panel_drv_data *ddata = data;
- bool hpd;
-
- hpd = gpio_get_value_cansleep(ddata->hpd_gpio);
-
- dev_dbg(ddata->dssdev.dev, "hpd %d\n", hpd);
-
- if (gpio_is_valid(ddata->ls_oe_gpio)) {
- if (hpd)
- gpio_set_value_cansleep(ddata->ls_oe_gpio, 1);
- else
- gpio_set_value_cansleep(ddata->ls_oe_gpio, 0);
- }
-
- complete_all(&ddata->hpd_completion);
-
- return IRQ_HANDLED;
-}
-
static int tpd_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
@@ -70,23 +47,10 @@ static int tpd_connect(struct omap_dss_device *dssdev,
dst->src = dssdev;
dssdev->dst = dst;
- reinit_completion(&ddata->hpd_completion);
-
gpio_set_value_cansleep(ddata->ct_cp_hpd_gpio, 1);
/* DC-DC converter needs at max 300us to get to 90% of 5V */
udelay(300);
- /*
- * If there's a cable connected, wait for the hpd irq to trigger,
- * which turns on the level shifters.
- */
- if (gpio_get_value_cansleep(ddata->hpd_gpio)) {
- unsigned long to;
- to = wait_for_completion_timeout(&ddata->hpd_completion,
- msecs_to_jiffies(250));
- WARN_ON_ONCE(to == 0);
- }
-
return 0;
}
@@ -179,11 +143,20 @@ static int tpd_read_edid(struct omap_dss_device *dssdev,
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
+ int r;
if (!gpio_get_value_cansleep(ddata->hpd_gpio))
return -ENODEV;
- return in->ops.hdmi->read_edid(in, edid, len);
+ if (gpio_is_valid(ddata->ls_oe_gpio))
+ gpio_set_value_cansleep(ddata->ls_oe_gpio, 1);
+
+ r = in->ops.hdmi->read_edid(in, edid, len);
+
+ if (gpio_is_valid(ddata->ls_oe_gpio))
+ gpio_set_value_cansleep(ddata->ls_oe_gpio, 0);
+
+ return r;
}
static bool tpd_detect(struct omap_dss_device *dssdev)
@@ -309,8 +282,6 @@ static int tpd_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ddata);
- init_completion(&ddata->hpd_completion);
-
if (dev_get_platdata(&pdev->dev)) {
r = tpd_probe_pdata(pdev);
if (r)
@@ -340,13 +311,6 @@ static int tpd_probe(struct platform_device *pdev)
if (r)
goto err_gpio;
- r = devm_request_threaded_irq(&pdev->dev, gpio_to_irq(ddata->hpd_gpio),
- NULL, tpd_hpd_irq_handler,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_ONESHOT, "hpd", ddata);
- if (r)
- goto err_irq;
-
dssdev = &ddata->dssdev;
dssdev->ops.hdmi = &tpd_hdmi_ops;
dssdev->dev = &pdev->dev;
@@ -365,7 +329,6 @@ static int tpd_probe(struct platform_device *pdev)
return 0;
err_reg:
-err_irq:
err_gpio:
omap_dss_put_device(ddata->in);
return r;
A race issue has been observed with the encoder-tpd12s015 driver, which leads to errors when trying to read EDID. This has only now been observed, as OMAP4 and OMAP5 boards used SoC's GPIOs for LS_OE GPIO. On dra7-evm boards, the LS_OE is behind a i2c controlled GPIO expander, which increases the time to set the LS_OE. This patch simplifies the handling of the LS_OE gpio in the driver by removing the interrupt handling totally. The only time we actually need to enable LS_OE is when we are reading the EDID, and thus we can just set and clear the LS_OE gpio inside the read_edid() function. This also has the additional benefit of very slightly decreasing the power consumption. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- .../fbdev/omap2/displays-new/encoder-tpd12s015.c | 57 ++++------------------ 1 file changed, 10 insertions(+), 47 deletions(-)