@@ -127,7 +127,7 @@ static unsigned int hw_i2c_write_data(
if (hw_i2c_wait_tx_done() != 0)
break;
- /* Substract length */
+ /* Subtract length */
length -= (count + 1);
/* Total byte written */
@@ -194,7 +194,7 @@ static unsigned int hw_i2c_read_data(
for (i = 0; i <= count; i++)
*buf++ = PEEK32(I2C_DATA0 + i);
- /* Substract length by 16 */
+ /* Subtract length by 16 */
length -= (count + 1);
/* Number of bytes read. */
@@ -42,7 +42,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
dispControl &= FIELD_CLEAR(CRT_DISPLAY_CTRL, CLK);
/* Set bit 29:27 of display control register for the right clock */
- /* Note that SM750LE only need to supported 7 resoluitons. */
+ /* Note that SM750LE only need to supported 7 resolutions. */
if (x == 800 && y == 600)
dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL41);
else if (x == 1024 && y == 768)
@@ -39,7 +39,10 @@ unsigned char sii164IsConnected(void);
unsigned char sii164CheckInterrupt(void);
void sii164ClearInterrupt(void);
#endif
-/* below register definination is used for Silicon Image SiI164 DVI controller chip */
+/*
+ * below register definition is used for
+ * Silicon Image SiI164 DVI controller chip
+ */
/*
* Vendor ID registers
*/
@@ -319,7 +319,7 @@ static int lynxfb_ops_set_par(struct fb_info *info)
var = &info->var;
fix = &info->fix;
- /* fix structur is not so FIX ... */
+ /* fix structure is not so FIX ... */
line_length = var->xres_virtual * var->bits_per_pixel / 8;
line_length = ALIGN(line_length, crtc->line_pad);
fix->line_length = line_length;
@@ -53,7 +53,7 @@ struct lynx_accel {
/* base virtual address of de data port */
volatile unsigned char __iomem *dpPortBase;
- /* function fointers */
+ /* function pointers */
void (*de_init)(struct lynx_accel *);
int (*de_wait)(void);/* see if hardware ready to work */
@@ -53,7 +53,7 @@ void hw_de_init(struct lynx_accel *accel)
FIELD_CLEAR(DE_STRETCH_FORMAT, ADDRESSING)&
FIELD_CLEAR(DE_STRETCH_FORMAT, SOURCE_HEIGHT);
- /* DE_STRETCH bpp format need be initilized in setMode routine */
+ /* DE_STRETCH bpp format need be initialized in setMode routine */
write_dpr(accel, DE_STRETCH_FORMAT, (read_dpr(accel, DE_STRETCH_FORMAT) & clr) | reg);
/* disable clipping and transparent */
@@ -305,7 +305,7 @@ int hw_imageblit(struct lynx_accel *accel,
u32 dx,
u32 dy, /* Starting coordinate of destination surface */
u32 width,
- u32 height, /* width and height of rectange in pixel value */
+ u32 height, /* width and height of rectangle in pixel value */
u32 fColor, /* Foreground color (corresponding to a 1 in the monochrome data */
u32 bColor, /* Background color (corresponding to a 0 in the monochrome data */
u32 rop2) /* ROP value */
@@ -268,7 +268,7 @@ int hw_imageblit(struct lynx_accel *accel,
u32 dx,
u32 dy, /* Starting coordinate of destination surface */
u32 width,
- u32 height, /* width and height of rectange in pixel value */
+ u32 height, /* width and height of rectangle in pixel value */
u32 fColor, /* Foreground color (corresponding to a 1 in the monochrome data */
u32 bColor, /* Background color (corresponding to a 0 in the monochrome data */
u32 rop2);
@@ -142,7 +142,7 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
break;
}
} else {
- /* for 750LE ,no DVI chip initilization makes Monitor no signal */
+ /* for 750LE ,no DVI chip initialization makes Monitor no signal */
/* Set up GPIO for software I2C to program DVI chip in the
Xilinx SP605 board, in order to have video signal.
*/
This is a note to let you know that I've just added the patch titled staging: sm750fb, fix typos to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the staging-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. From fbb8c963573926bceb5c59e2a7d74e5ce7669e78 Mon Sep 17 00:00:00 2001 From: Matej Vasek <xvasek1@fi.muni.cz> Date: Mon, 25 Jan 2016 16:02:33 +0100 Subject: staging: sm750fb, fix typos The code contained typos like "structur", "fointers", etc. Fix that. No code change, only comments. Signed-off-by: Matej Vasek <xvasek1@fi.muni.cz> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <linux-fbdev@vger.kernel.org> Cc: <devel@driverdev.osuosl.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/staging/sm750fb/ddk750_hwi2c.c | 4 ++-- drivers/staging/sm750fb/ddk750_mode.c | 2 +- drivers/staging/sm750fb/ddk750_sii164.h | 5 ++++- drivers/staging/sm750fb/sm750.c | 2 +- drivers/staging/sm750fb/sm750.h | 2 +- drivers/staging/sm750fb/sm750_accel.c | 4 ++-- drivers/staging/sm750fb/sm750_accel.h | 2 +- drivers/staging/sm750fb/sm750_hw.c | 2 +- 8 files changed, 13 insertions(+), 10 deletions(-)