@@ -37,6 +37,10 @@ static u_long videomemorysize = VIDEOMEMSIZE;
module_param(videomemorysize, ulong, 0);
MODULE_PARM_DESC(videomemorysize, "RAM available to frame buffer (in bytes)");
+static char *mode_option = NULL;
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Preferred video mode (e.g. 640x480-8@60)");
+
/**********************************************************************
*
* Memory management
@@ -86,26 +90,17 @@ static void rvfree(void *mem, unsigned long size)
vfree(mem);
}
-static struct fb_var_screeninfo vfb_default = {
+static struct fb_videomode vfb_default = {
.xres = 640,
.yres = 480,
- .xres_virtual = 640,
- .yres_virtual = 480,
- .bits_per_pixel = 8,
- .red = { 0, 8, 0 },
- .green = { 0, 8, 0 },
- .blue = { 0, 8, 0 },
- .activate = FB_ACTIVATE_TEST,
- .height = -1,
- .width = -1,
- .pixclock = 20000,
- .left_margin = 64,
- .right_margin = 64,
- .upper_margin = 32,
- .lower_margin = 32,
- .hsync_len = 64,
- .vsync_len = 2,
- .vmode = FB_VMODE_NONINTERLACED,
+ .pixclock = 20000,
+ .left_margin = 64,
+ .right_margin = 64,
+ .upper_margin = 32,
+ .lower_margin = 32,
+ .hsync_len = 64,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
};
static struct fb_fix_screeninfo vfb_fix = {
@@ -479,6 +474,8 @@ static int __init vfb_setup(char *options)
/* Test disable for backwards compatibility */
if (!strcmp(this_opt, "disable"))
vfb_enable = 0;
+ else
+ mode_option = this_opt;
}
return 1;
}
@@ -506,11 +503,13 @@ static int vfb_probe(struct platform_device *dev)
info->screen_base = (char __iomem *)videomemory;
info->fbops = &vfb_ops;
- retval = fb_find_mode(&info->var, info, NULL,
- NULL, 0, NULL, 8);
+ if (!fb_find_mode(&info->var, info, mode_option,
+ NULL, 0, &vfb_default, 8)){
+ fb_err(info, "Unable to find usable video mode.\n");
+ retval = -EINVAL;
+ goto err1;
+ }
- if (!retval || (retval == 4))
- info->var = vfb_default;
vfb_fix.smem_start = (unsigned long) videomemory;
vfb_fix.smem_len = videomemorysize;
info->fix = vfb_fix;
Make vfb a bit more flexible in sense what it can represent and allow the end user to specify video mode parameters via newly introduced module option "mode". Since it is test module it is still up to the end user to make sure there is enough memory to satisfy video mode settings. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> --- drivers/video/fbdev/vfb.c | 43 +++++++++++++++++++++---------------------- 1 file changed, 21 insertions(+), 22 deletions(-)