| Message ID | 1478197768-3694-1-git-send-email-olimpiu@arcticsand.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Nov 03, 2016 at 02:29:28PM -0400, Olimpiu Dejeu wrote: > Resubmition of arcxcnn backliught driver addressing the naming convention s/Resubmition/Re-submission/ s/backliught/backlight/ > concerns raised by Rob H. Note that all the device tree properties are > determined by the board design or IC EPROM settings and are not intended > to be user adjustable. > > Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com> > > --- > .../bindings/leds/backlight/arcxcnn_bl.txt | 31 ++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt With that, Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt new file mode 100644 index 0000000..a7b6ff2 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt @@ -0,0 +1,33 @@ +Binding for ArcticSand arc2c0608 LED driver + +Required properties: +- compatible: should be "arc,arc2c0608" +- reg: slave address + +Optional properties: +- default-brightness: brightness value on boot, value from: 0-4095 +- label: The name of the backlight device + See Documentation/devicetree/bindings/leds/common.txt +- led-sources: List of enabled channels from 0 to 5. + See Documentation/devicetree/bindings/leds/common.txt + +- arc,led-config-0: setting for register ILED_CONFIG_0 +- arc,led-config-1: setting for register ILED_CONFIG_1 +- arc,dim-freq: PWM mode frequence setting (bits [3:0] used) +- arc,comp-config: setting for register CONFIG_COMP +- arc,filter-config: setting for register FILTER_CONFIG +- arc,trim-config: setting for register IMAXTUNE + +Note: Optional properties not specified will default to values in IC EPROM + +Example: + +arc2c0608@30 { + compatible = "arc,arc2c0608"; + reg = <0x30>; + default-brightness = <500>; + label = "lcd-backlight"; + linux,default-trigger = "backlight"; + led-sources = <0 1 2 5>; +}; +
Resubmition of arcxcnn backliught driver addressing the naming convention concerns raised by Rob H. Note that all the device tree properties are determined by the board design or IC EPROM settings and are not intended to be user adjustable. Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com> --- .../bindings/leds/backlight/arcxcnn_bl.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt