| Message ID | 1481158673-15937-8-git-send-email-steve_longerbeam@mentor.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 043d20c..944a4fa 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -136,6 +136,9 @@ reg = <0x32>; gpio-controller; #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max7310>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; max7310_c: gpio@34 { @@ -442,6 +445,12 @@ >; }; + pinctrl_max7310: max7310grp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x80000000 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
The reset pin to the port expander chip (MAX7310) is controlled by a gpio, so define a reset-gpios property to control it. There are three MAX7310's on the SabreAuto CPU card (max7310_[abc]), but all use the same pin for their reset. Since all can't acquire the same pin, assign it to max7310_b, that chip is needed by more functions (usb and adv7180). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)