diff mbox

Fixed cameCase check in file drivers/staging/sm750fb/ddk750_chip.c

Message ID 1495455091-25431-1-git-send-email-richaj@cdac.in (mailing list archive)
State New, archived
Headers show

Commit Message

Richa Jha May 22, 2017, 12:11 p.m. UTC 
Changes :

ulActualMxClk ---> ul_actual_max_clk
pInitParam    ---> p_init_param

Signed-off-by: Richa Jha <richaj@cdac.in>
---
 drivers/staging/sm750fb/ddk750_chip.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

Comments

Greg KH May 22, 2017, 1:41 p.m. UTC | #1 
On Mon, May 22, 2017 at 05:41:31PM +0530, Richa Jha wrote:
> Changes :
> 
> ulActualMxClk ---> ul_actual_max_clk
> pInitParam    ---> p_init_param

I can see that from the patch, but _why_ are you doing this?

And please fix up your subject to match others for this driver, you can
find that in 'git log FILENAME'

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index 7b1180a..00bca17 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -55,7 +55,7 @@  static unsigned int get_mxclk_freq(void)
 static void set_chip_clock(unsigned int frequency)
 {
 	struct pll_value pll;
-	unsigned int ulActualMxClk;
+	unsigned int ul_actual_max_clk;
 
 	/* Cheok_0509: For SM750LE, the chip clock is fixed. Nothing to set. */
 	if (sm750_get_chip_type() == SM750LE)
@@ -75,7 +75,7 @@  static void set_chip_clock(unsigned int frequency)
 		 * Return value of sm750_calc_pll_value gives the actual
 		 * possible clock.
 		 */
-		ulActualMxClk = sm750_calc_pll_value(frequency, &pll);
+		ul_actual_max_clk = sm750_calc_pll_value(frequency, &pll);
 
 		/* Master Clock Control: MXCLK_PLL */
 		poke32(MXCLK_PLL_CTRL, sm750_format_pll_reg(&pll));
@@ -210,11 +210,11 @@  unsigned int ddk750_get_vm_size(void)
 	return data;
 }
 
-int ddk750_init_hw(struct initchip_param *pInitParam)
+int ddk750_init_hw(struct initchip_param *p_init_param)
 {
 	unsigned int reg;
 
-	if (pInitParam->powerMode != 0)
+	if (p_init_param->powerMode != 0)
 		p_init_param->powerMode = 0;
 	sm750_set_power_mode(p_init_param->powerMode);
 
@@ -237,13 +237,13 @@  int ddk750_init_hw(struct initchip_param *pInitParam)
 	}
 
 	/* Set the Main Chip Clock */
-	set_chip_clock(MHz((unsigned int)pInitParam->chipClock));
+	set_chip_clock(MHz((unsigned int)p_init_param->chipClock));
 
 	/* Set up memory clock. */
-	set_memory_clock(MHz(pInitParam->memClock));
+	set_memory_clock(MHz(p_init_param->memClock));
 
 	/* Set up master clock */
-	set_master_clock(MHz(pInitParam->masterClock));
+	set_master_clock(MHz(p_init_param->masterClock));
 
 	/*
 	 * Reset the memory controller.
@@ -251,7 +251,7 @@  int ddk750_init_hw(struct initchip_param *pInitParam)
 	 * the system might hang when sw accesses the memory.
 	 * The memory should be resetted after changing the MXCLK.
 	 */
-	if (pInitParam->resetMemory == 1) {
+	if (p_init_param->resetMemory == 1) {
 		reg = peek32(MISC_CTRL);
 		reg &= ~MISC_CTRL_LOCALMEM_RESET;
 		poke32(MISC_CTRL, reg);
@@ -260,7 +260,7 @@  int ddk750_init_hw(struct initchip_param *pInitParam)
 		poke32(MISC_CTRL, reg);
 	}
 
-	if (pInitParam->setAllEngOff == 1) {
+	if (p_init_param->setAllEngOff == 1) {
 		sm750_enable_2d_engine(0);
 
 		/* Disable Overlay, if a former application left it on */