@@ -55,7 +55,7 @@ static unsigned int get_mxclk_freq(void)
static void set_chip_clock(unsigned int frequency)
{
struct pll_value pll;
- unsigned int ulActualMxClk;
+ unsigned int ul_actual_max_clk;
/* Cheok_0509: For SM750LE, the chip clock is fixed. Nothing to set. */
if (sm750_get_chip_type() == SM750LE)
@@ -75,7 +75,7 @@ static void set_chip_clock(unsigned int frequency)
* Return value of sm750_calc_pll_value gives the actual
* possible clock.
*/
- ulActualMxClk = sm750_calc_pll_value(frequency, &pll);
+ ul_actual_max_clk = sm750_calc_pll_value(frequency, &pll);
/* Master Clock Control: MXCLK_PLL */
poke32(MXCLK_PLL_CTRL, sm750_format_pll_reg(&pll));
@@ -210,11 +210,11 @@ unsigned int ddk750_get_vm_size(void)
return data;
}
-int ddk750_init_hw(struct initchip_param *pInitParam)
+int ddk750_init_hw(struct initchip_param *p_init_param)
{
unsigned int reg;
- if (pInitParam->powerMode != 0)
+ if (p_init_param->powerMode != 0)
p_init_param->powerMode = 0;
sm750_set_power_mode(p_init_param->powerMode);
@@ -237,13 +237,13 @@ int ddk750_init_hw(struct initchip_param *pInitParam)
}
/* Set the Main Chip Clock */
- set_chip_clock(MHz((unsigned int)pInitParam->chipClock));
+ set_chip_clock(MHz((unsigned int)p_init_param->chipClock));
/* Set up memory clock. */
- set_memory_clock(MHz(pInitParam->memClock));
+ set_memory_clock(MHz(p_init_param->memClock));
/* Set up master clock */
- set_master_clock(MHz(pInitParam->masterClock));
+ set_master_clock(MHz(p_init_param->masterClock));
/*
* Reset the memory controller.
@@ -251,7 +251,7 @@ int ddk750_init_hw(struct initchip_param *pInitParam)
* the system might hang when sw accesses the memory.
* The memory should be resetted after changing the MXCLK.
*/
- if (pInitParam->resetMemory == 1) {
+ if (p_init_param->resetMemory == 1) {
reg = peek32(MISC_CTRL);
reg &= ~MISC_CTRL_LOCALMEM_RESET;
poke32(MISC_CTRL, reg);
@@ -260,7 +260,7 @@ int ddk750_init_hw(struct initchip_param *pInitParam)
poke32(MISC_CTRL, reg);
}
- if (pInitParam->setAllEngOff == 1) {
+ if (p_init_param->setAllEngOff == 1) {
sm750_enable_2d_engine(0);
/* Disable Overlay, if a former application left it on */
Replace CamelCase function names with underscores to comply with the standard kernel coding style Signed-off-by: Richa Jha <richaj@cdac.in> --- drivers/staging/sm750fb/ddk750_chip.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)