Message ID | 1525342352-25072-2-git-send-email-kgunda@codeaurora.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thursday, May 3, 2018 6:12 AM, Kiran Gunda wrote: If you really want someone to review your patch, please add more detailed explanations. 1. Please add 0th patch. 2. Please add what the difference is between V1 and V2 patches. If you cannot understand what I am saying, just ask another person who have an experience to send patches to Linux mailing-list. Best regards, Jingoo Han > > pm8941-wled.c driver is supporting the WLED peripheral > on pm8941. Rename it to qcom-wled.c so that it can support > WLED on multiple PMICs. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> > --- > .../bindings/leds/backlight/{pm8941-wled.txt => qcom-wled.txt} | 2 +- > drivers/video/backlight/Kconfig | 8 ++++---- > drivers/video/backlight/Makefile | 2 +- > drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} | 0 > 4 files changed, 6 insertions(+), 6 deletions(-) > rename Documentation/devicetree/bindings/leds/backlight/{pm8941-wled.txt > => qcom-wled.txt} (95%) > rename drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} (100%) > > diff --git a/Documentation/devicetree/bindings/leds/backlight/pm8941- > wled.txt b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt > similarity index 95% > rename from Documentation/devicetree/bindings/leds/backlight/pm8941- > wled.txt > rename to Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt > index e5b294d..fb39e32 100644 > --- a/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt > +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt > @@ -1,4 +1,4 @@ > -Binding for Qualcomm PM8941 WLED driver > +Binding for Qualcomm Technologies, Inc. WLED driver > > Required properties: > - compatible: should be "qcom,pm8941-wled" > diff --git a/drivers/video/backlight/Kconfig > b/drivers/video/backlight/Kconfig > index 4e1d2ad..8c095e3 100644 > --- a/drivers/video/backlight/Kconfig > +++ b/drivers/video/backlight/Kconfig > @@ -299,12 +299,12 @@ config BACKLIGHT_TOSA > If you have an Sharp SL-6000 Zaurus say Y to enable a driver > for its backlight > > -config BACKLIGHT_PM8941_WLED > - tristate "Qualcomm PM8941 WLED Driver" > +config BACKLIGHT_QCOM_WLED > + tristate "Qualcomm PMIC WLED Driver" > select REGMAP > help > - If you have the Qualcomm PM8941, say Y to enable a driver for the > - WLED block. > + If you have the Qualcomm PMIC, say Y to enable a driver for the > + WLED block. Currently it supports PM8941 and PMI8998. > > config BACKLIGHT_SAHARA > tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" > diff --git a/drivers/video/backlight/Makefile > b/drivers/video/backlight/Makefile > index 5e28f01..6fd76ef 100644 > --- a/drivers/video/backlight/Makefile > +++ b/drivers/video/backlight/Makefile > @@ -49,8 +49,8 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o > obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o > obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o > obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o > -obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o > obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o > +obj-$(CONFIG_BACKLIGHT_QCOM_WLED) += qcom-wled.o > obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o > obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o > obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o > diff --git a/drivers/video/backlight/pm8941-wled.c > b/drivers/video/backlight/qcom-wled.c > similarity index 100% > rename from drivers/video/backlight/pm8941-wled.c > rename to drivers/video/backlight/qcom-wled.c > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jingoo Han, Thanks for the response. Thanks, Kiran On 2018-05-04 21:25, Jingoo Han wrote: > On Thursday, May 3, 2018 6:12 AM, Kiran Gunda wrote: > > If you really want someone to review your patch, please add more > detailed > explanations. > > 1. Please add 0th patch. I have already added the 0th patch (cover letter). Following is the subject for the same. forwarding the same to you. [PATCH V2 0/5] backlight: qcom-wled: Support for QCOM wled driver > 2. Please add what the difference is between V1 and V2 patches. > Already added the difference between V1 and V2 in the cover letter (0th patch). Please let me know if you are looking for any other info. Following is the difference added between v1 and v2. >>> changes from v1: Fixed the commit message for backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c > If you cannot understand what I am saying, just ask another person who > have > an experience to send patches to Linux mailing-list. > > Best regards, > Jingoo Han > >> >> pm8941-wled.c driver is supporting the WLED peripheral >> on pm8941. Rename it to qcom-wled.c so that it can support >> WLED on multiple PMICs. >> >> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> >> --- >> .../bindings/leds/backlight/{pm8941-wled.txt => qcom-wled.txt} | 2 >> +- >> drivers/video/backlight/Kconfig | 8 > ++++---- >> drivers/video/backlight/Makefile | 2 >> +- >> drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} | 0 >> 4 files changed, 6 insertions(+), 6 deletions(-) >> rename >> Documentation/devicetree/bindings/leds/backlight/{pm8941-wled.txt >> => qcom-wled.txt} (95%) >> rename drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} (100%) >> >> diff --git a/Documentation/devicetree/bindings/leds/backlight/pm8941- >> wled.txt >> b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt >> similarity index 95% >> rename from Documentation/devicetree/bindings/leds/backlight/pm8941- >> wled.txt >> rename to >> Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt >> index e5b294d..fb39e32 100644 >> --- a/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt >> +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt >> @@ -1,4 +1,4 @@ >> -Binding for Qualcomm PM8941 WLED driver >> +Binding for Qualcomm Technologies, Inc. WLED driver >> >> Required properties: >> - compatible: should be "qcom,pm8941-wled" >> diff --git a/drivers/video/backlight/Kconfig >> b/drivers/video/backlight/Kconfig >> index 4e1d2ad..8c095e3 100644 >> --- a/drivers/video/backlight/Kconfig >> +++ b/drivers/video/backlight/Kconfig >> @@ -299,12 +299,12 @@ config BACKLIGHT_TOSA >> If you have an Sharp SL-6000 Zaurus say Y to enable a driver >> for its backlight >> >> -config BACKLIGHT_PM8941_WLED >> - tristate "Qualcomm PM8941 WLED Driver" >> +config BACKLIGHT_QCOM_WLED >> + tristate "Qualcomm PMIC WLED Driver" >> select REGMAP >> help >> - If you have the Qualcomm PM8941, say Y to enable a driver for the >> - WLED block. >> + If you have the Qualcomm PMIC, say Y to enable a driver for the >> + WLED block. Currently it supports PM8941 and PMI8998. >> >> config BACKLIGHT_SAHARA >> tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" >> diff --git a/drivers/video/backlight/Makefile >> b/drivers/video/backlight/Makefile >> index 5e28f01..6fd76ef 100644 >> --- a/drivers/video/backlight/Makefile >> +++ b/drivers/video/backlight/Makefile >> @@ -49,8 +49,8 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += > omap1_bl.o >> obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o >> obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o >> obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o >> -obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o >> obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o >> +obj-$(CONFIG_BACKLIGHT_QCOM_WLED) += qcom-wled.o >> obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o >> obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o >> obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o >> diff --git a/drivers/video/backlight/pm8941-wled.c >> b/drivers/video/backlight/qcom-wled.c >> similarity index 100% >> rename from drivers/video/backlight/pm8941-wled.c >> rename to drivers/video/backlight/qcom-wled.c >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >> a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, May 03, 2018 at 03:42:28PM +0530, Kiran Gunda wrote: > pm8941-wled.c driver is supporting the WLED peripheral > on pm8941. Rename it to qcom-wled.c so that it can support > WLED on multiple PMICs. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> > --- > .../bindings/leds/backlight/{pm8941-wled.txt => qcom-wled.txt} | 2 +- Please split DT bindings from driver patches. > drivers/video/backlight/Kconfig | 8 ++++---- > drivers/video/backlight/Makefile | 2 +- > drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} | 0 > 4 files changed, 6 insertions(+), 6 deletions(-) > rename Documentation/devicetree/bindings/leds/backlight/{pm8941-wled.txt => qcom-wled.txt} (95%) > rename drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} (100%) -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, May 07, 2018 at 11:26:59AM +0530, kgunda@codeaurora.org wrote: > Hi Jingoo Han, > Thanks for the response. > > Thanks, > Kiran > On 2018-05-04 21:25, Jingoo Han wrote: > > On Thursday, May 3, 2018 6:12 AM, Kiran Gunda wrote: > > > > If you really want someone to review your patch, please add more > > detailed > > explanations. > > > > 1. Please add 0th patch. > I have already added the 0th patch (cover letter). Following is the subject > for the same. > forwarding the same to you. > [PATCH V2 0/5] backlight: qcom-wled: Support for QCOM wled driver Perhaps you should interpret Jingoo's comment as a request to improve the To: and Cc: list on the 0th patch the next time you circulate it. Many maintainers configure their mailers to give patches where they are in the To: or Cc: list special treatment so it confusing when a series arrives with a spartan set of recipients for the 0th patch (and doubly confusing when every patch in the set targets the same driver). Daniel. -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, May 03, 2018 at 03:42:28PM +0530, Kiran Gunda wrote: > pm8941-wled.c driver is supporting the WLED peripheral > on pm8941. Rename it to qcom-wled.c so that it can support > WLED on multiple PMICs. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> > --- > .../bindings/leds/backlight/{pm8941-wled.txt => qcom-wled.txt} | 2 +- > drivers/video/backlight/Kconfig | 8 ++++---- > drivers/video/backlight/Makefile | 2 +- > drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} | 0 For me this hovers extremely close to being a gratuitous renaming especially with no effort to bridge the gap between old and new names. On the other hand, no current defconfig enables BACKLIGHT_PM8941_WLED, it is configured by DT (so modules.conf tricks are unlikely) and any distros that already have it enables are likely to be aggressive in enabling drivers (so will probably turn on BACKLIGHT_QCOM_WLED as soon as it appears). On that basis I can live with this... but will also listen for any complaints! Daniel. > 4 files changed, 6 insertions(+), 6 deletions(-) > rename Documentation/devicetree/bindings/leds/backlight/{pm8941-wled.txt => qcom-wled.txt} (95%) > rename drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} (100%) > > diff --git a/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt > similarity index 95% > rename from Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt > rename to Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt > index e5b294d..fb39e32 100644 > --- a/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt > +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt > @@ -1,4 +1,4 @@ > -Binding for Qualcomm PM8941 WLED driver > +Binding for Qualcomm Technologies, Inc. WLED driver > > Required properties: > - compatible: should be "qcom,pm8941-wled" > diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig > index 4e1d2ad..8c095e3 100644 > --- a/drivers/video/backlight/Kconfig > +++ b/drivers/video/backlight/Kconfig > @@ -299,12 +299,12 @@ config BACKLIGHT_TOSA > If you have an Sharp SL-6000 Zaurus say Y to enable a driver > for its backlight > > -config BACKLIGHT_PM8941_WLED > - tristate "Qualcomm PM8941 WLED Driver" > +config BACKLIGHT_QCOM_WLED > + tristate "Qualcomm PMIC WLED Driver" > select REGMAP > help > - If you have the Qualcomm PM8941, say Y to enable a driver for the > - WLED block. > + If you have the Qualcomm PMIC, say Y to enable a driver for the > + WLED block. Currently it supports PM8941 and PMI8998. > > config BACKLIGHT_SAHARA > tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" > diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile > index 5e28f01..6fd76ef 100644 > --- a/drivers/video/backlight/Makefile > +++ b/drivers/video/backlight/Makefile > @@ -49,8 +49,8 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o > obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o > obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o > obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o > -obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o > obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o > +obj-$(CONFIG_BACKLIGHT_QCOM_WLED) += qcom-wled.o > obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o > obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o > obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o > diff --git a/drivers/video/backlight/pm8941-wled.c b/drivers/video/backlight/qcom-wled.c > similarity index 100% > rename from drivers/video/backlight/pm8941-wled.c > rename to drivers/video/backlight/qcom-wled.c > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2018-05-08 14:06, Daniel Thompson wrote: > On Mon, May 07, 2018 at 11:26:59AM +0530, kgunda@codeaurora.org wrote: >> Hi Jingoo Han, >> Thanks for the response. >> >> Thanks, >> Kiran >> On 2018-05-04 21:25, Jingoo Han wrote: >> > On Thursday, May 3, 2018 6:12 AM, Kiran Gunda wrote: >> > >> > If you really want someone to review your patch, please add more >> > detailed >> > explanations. >> > >> > 1. Please add 0th patch. >> I have already added the 0th patch (cover letter). Following is the >> subject >> for the same. >> forwarding the same to you. >> [PATCH V2 0/5] backlight: qcom-wled: Support for QCOM wled driver > > Perhaps you should interpret Jingoo's comment as a request to improve > the To: and Cc: list on the 0th patch the next time you circulate it. > > Many maintainers configure their mailers to give patches where they are > in the To: or Cc: list special treatment so it confusing when a series > arrives with a spartan set of recipients for the 0th patch (and doubly > confusing when every patch in the set targets the same driver). > > > Daniel. Ok. Got it. Not sure how the To: Cc: list on the 0th patch got shrink, while I was using the To: Cc: list same for all the patches. Anyways, will double check of it while circulating the next series. -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2018-05-07 22:10, Rob Herring wrote: > On Thu, May 03, 2018 at 03:42:28PM +0530, Kiran Gunda wrote: >> pm8941-wled.c driver is supporting the WLED peripheral >> on pm8941. Rename it to qcom-wled.c so that it can support >> WLED on multiple PMICs. >> >> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> >> --- >> .../bindings/leds/backlight/{pm8941-wled.txt => qcom-wled.txt} | 2 >> +- > > Please split DT bindings from driver patches. > Sure. Will do that in the next series. >> drivers/video/backlight/Kconfig | 8 >> ++++---- >> drivers/video/backlight/Makefile | 2 >> +- >> drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} | 0 >> 4 files changed, 6 insertions(+), 6 deletions(-) >> rename >> Documentation/devicetree/bindings/leds/backlight/{pm8941-wled.txt => >> qcom-wled.txt} (95%) >> rename drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} (100%) > -- > To unsubscribe from this list: send the line "unsubscribe > linux-arm-msm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt similarity index 95% rename from Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt rename to Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt index e5b294d..fb39e32 100644 --- a/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt @@ -1,4 +1,4 @@ -Binding for Qualcomm PM8941 WLED driver +Binding for Qualcomm Technologies, Inc. WLED driver Required properties: - compatible: should be "qcom,pm8941-wled" diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 4e1d2ad..8c095e3 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -299,12 +299,12 @@ config BACKLIGHT_TOSA If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its backlight -config BACKLIGHT_PM8941_WLED - tristate "Qualcomm PM8941 WLED Driver" +config BACKLIGHT_QCOM_WLED + tristate "Qualcomm PMIC WLED Driver" select REGMAP help - If you have the Qualcomm PM8941, say Y to enable a driver for the - WLED block. + If you have the Qualcomm PMIC, say Y to enable a driver for the + WLED block. Currently it supports PM8941 and PMI8998. config BACKLIGHT_SAHARA tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 5e28f01..6fd76ef 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -49,8 +49,8 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o -obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o +obj-$(CONFIG_BACKLIGHT_QCOM_WLED) += qcom-wled.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o diff --git a/drivers/video/backlight/pm8941-wled.c b/drivers/video/backlight/qcom-wled.c similarity index 100% rename from drivers/video/backlight/pm8941-wled.c rename to drivers/video/backlight/qcom-wled.c
pm8941-wled.c driver is supporting the WLED peripheral on pm8941. Rename it to qcom-wled.c so that it can support WLED on multiple PMICs. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> --- .../bindings/leds/backlight/{pm8941-wled.txt => qcom-wled.txt} | 2 +- drivers/video/backlight/Kconfig | 8 ++++---- drivers/video/backlight/Makefile | 2 +- drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} | 0 4 files changed, 6 insertions(+), 6 deletions(-) rename Documentation/devicetree/bindings/leds/backlight/{pm8941-wled.txt => qcom-wled.txt} (95%) rename drivers/video/backlight/{pm8941-wled.c => qcom-wled.c} (100%)