| Message ID | 1531131741-19971-5-git-send-email-kgunda@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 09/07/18 11:22, Kiran Gunda wrote: > Rename the PM8941* references as WLED3 to make the > driver generic and have WLED support for other PMICs. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> > --- > Changes from V3: > - Changed the MODULE_DESCRIPTION > > drivers/video/backlight/qcom-wled.c | 248 ++++++++++++++++++------------------ > 1 file changed, 125 insertions(+), 123 deletions(-) > > diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c > index 0b6d219..3cd6e75 100644 > --- a/drivers/video/backlight/qcom-wled.c > +++ b/drivers/video/backlight/qcom-wled.c > @@ -18,77 +18,79 @@ > #include <linux/regmap.h> > > /* From DT binding */ > -#define PM8941_WLED_DEFAULT_BRIGHTNESS 2048 > +#define WLED_DEFAULT_BRIGHTNESS 2048 > > -#define PM8941_WLED_REG_VAL_BASE 0x40 > -#define PM8941_WLED_REG_VAL_MAX 0xFFF > +#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF > +#define WLED3_CTRL_REG_VAL_BASE 0x40 > > -#define PM8941_WLED_REG_MOD_EN 0x46 > -#define PM8941_WLED_REG_MOD_EN_BIT BIT(7) > -#define PM8941_WLED_REG_MOD_EN_MASK BIT(7) > +/* WLED3 control registers */ > +#define WLED3_CTRL_REG_MOD_EN 0x46 > +#define WLED3_CTRL_REG_MOD_EN_BIT BIT(7) > +#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) > > -#define PM8941_WLED_REG_SYNC 0x47 > -#define PM8941_WLED_REG_SYNC_MASK 0x07 > -#define PM8941_WLED_REG_SYNC_LED1 BIT(0) > -#define PM8941_WLED_REG_SYNC_LED2 BIT(1) > -#define PM8941_WLED_REG_SYNC_LED3 BIT(2) > -#define PM8941_WLED_REG_SYNC_ALL 0x07 > -#define PM8941_WLED_REG_SYNC_CLEAR 0x00 > +#define WLED3_CTRL_REG_FREQ 0x4c > +#define WLED3_CTRL_REG_FREQ_MASK 0x0f > > -#define PM8941_WLED_REG_FREQ 0x4c > -#define PM8941_WLED_REG_FREQ_MASK 0x0f > +#define WLED3_CTRL_REG_OVP 0x4d > +#define WLED3_CTRL_REG_OVP_MASK 0x03 > > -#define PM8941_WLED_REG_OVP 0x4d > -#define PM8941_WLED_REG_OVP_MASK 0x03 > +#define WLED3_CTRL_REG_ILIMIT 0x4e > +#define WLED3_CTRL_REG_ILIMIT_MASK 0x07 > > -#define PM8941_WLED_REG_BOOST 0x4e > -#define PM8941_WLED_REG_BOOST_MASK 0x07 > +/* WLED3 sink registers */ > +#define WLED3_SINK_REG_SYNC 0x47 > +#define WLED3_SINK_REG_SYNC_MASK 0x07 > +#define WLED3_SINK_REG_SYNC_LED1 BIT(0) > +#define WLED3_SINK_REG_SYNC_LED2 BIT(1) > +#define WLED3_SINK_REG_SYNC_LED3 BIT(2) > +#define WLED3_SINK_REG_SYNC_ALL 0x07 > +#define WLED3_SINK_REG_SYNC_CLEAR 0x00 > > -#define PM8941_WLED_REG_SINK 0x4f > -#define PM8941_WLED_REG_SINK_MASK 0xe0 > -#define PM8941_WLED_REG_SINK_SHFT 0x05 > +#define WLED3_SINK_REG_CURR_SINK 0x4f > +#define WLED3_SINK_REG_CURR_SINK_MASK 0xe0 > +#define WLED3_SINK_REG_CURR_SINK_SHFT 0x05 > > -/* Per-'string' registers below */ > -#define PM8941_WLED_REG_STR_OFFSET 0x10 > +/* WLED3 per-'string' registers below */ > +#define WLED3_SINK_REG_STR_OFFSET 0x10 > > -#define PM8941_WLED_REG_STR_MOD_EN_BASE 0x60 > -#define PM8941_WLED_REG_STR_MOD_MASK BIT(7) > -#define PM8941_WLED_REG_STR_MOD_EN BIT(7) > +#define WLED3_SINK_REG_STR_MOD_EN_BASE 0x60 > +#define WLED3_SINK_REG_STR_MOD_MASK BIT(7) > +#define WLED3_SINK_REG_STR_MOD_EN BIT(7) > > -#define PM8941_WLED_REG_STR_SCALE_BASE 0x62 > -#define PM8941_WLED_REG_STR_SCALE_MASK 0x1f > +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR 0x62 > +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK 0x1f > > -#define PM8941_WLED_REG_STR_MOD_SRC_BASE 0x63 > -#define PM8941_WLED_REG_STR_MOD_SRC_MASK 0x01 > -#define PM8941_WLED_REG_STR_MOD_SRC_INT 0x00 > -#define PM8941_WLED_REG_STR_MOD_SRC_EXT 0x01 > +#define WLED3_SINK_REG_STR_MOD_SRC_BASE 0x63 > +#define WLED3_SINK_REG_STR_MOD_SRC_MASK 0x01 > +#define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00 > +#define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01 > > -#define PM8941_WLED_REG_STR_CABC_BASE 0x66 > -#define PM8941_WLED_REG_STR_CABC_MASK BIT(7) > -#define PM8941_WLED_REG_STR_CABC_EN BIT(7) > +#define WLED3_SINK_REG_STR_CABC_BASE 0x66 > +#define WLED3_SINK_REG_STR_CABC_MASK BIT(7) > +#define WLED3_SINK_REG_STR_CABC_EN BIT(7) > > -struct pm8941_wled_config { > - u32 i_boost_limit; > +struct wled_config { > + u32 boost_i_limit; > u32 ovp; > u32 switch_freq; > u32 num_strings; > - u32 i_limit; > + u32 string_i_limit; This patch implements a grand renaming and I have no objections to including change for boost_i_limit and string_i_limit in it. I'd prefer it to be mentioned in the patch header though. Once that is done: Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2018-07-20 18:53, Daniel Thompson wrote: > On 09/07/18 11:22, Kiran Gunda wrote: >> Rename the PM8941* references as WLED3 to make the >> driver generic and have WLED support for other PMICs. >> >> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> >> --- >> Changes from V3: >> - Changed the MODULE_DESCRIPTION >> >> drivers/video/backlight/qcom-wled.c | 248 >> ++++++++++++++++++------------------ >> 1 file changed, 125 insertions(+), 123 deletions(-) >> >> diff --git a/drivers/video/backlight/qcom-wled.c >> b/drivers/video/backlight/qcom-wled.c >> index 0b6d219..3cd6e75 100644 >> --- a/drivers/video/backlight/qcom-wled.c >> +++ b/drivers/video/backlight/qcom-wled.c >> @@ -18,77 +18,79 @@ >> #include <linux/regmap.h> >> /* From DT binding */ >> -#define PM8941_WLED_DEFAULT_BRIGHTNESS 2048 >> +#define WLED_DEFAULT_BRIGHTNESS 2048 >> -#define PM8941_WLED_REG_VAL_BASE 0x40 >> -#define PM8941_WLED_REG_VAL_MAX 0xFFF >> +#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF >> +#define WLED3_CTRL_REG_VAL_BASE 0x40 >> -#define PM8941_WLED_REG_MOD_EN 0x46 >> -#define PM8941_WLED_REG_MOD_EN_BIT BIT(7) >> -#define PM8941_WLED_REG_MOD_EN_MASK BIT(7) >> +/* WLED3 control registers */ >> +#define WLED3_CTRL_REG_MOD_EN 0x46 >> +#define WLED3_CTRL_REG_MOD_EN_BIT BIT(7) >> +#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) >> -#define PM8941_WLED_REG_SYNC 0x47 >> -#define PM8941_WLED_REG_SYNC_MASK 0x07 >> -#define PM8941_WLED_REG_SYNC_LED1 BIT(0) >> -#define PM8941_WLED_REG_SYNC_LED2 BIT(1) >> -#define PM8941_WLED_REG_SYNC_LED3 BIT(2) >> -#define PM8941_WLED_REG_SYNC_ALL 0x07 >> -#define PM8941_WLED_REG_SYNC_CLEAR 0x00 >> +#define WLED3_CTRL_REG_FREQ 0x4c >> +#define WLED3_CTRL_REG_FREQ_MASK 0x0f >> -#define PM8941_WLED_REG_FREQ 0x4c >> -#define PM8941_WLED_REG_FREQ_MASK 0x0f >> +#define WLED3_CTRL_REG_OVP 0x4d >> +#define WLED3_CTRL_REG_OVP_MASK 0x03 >> -#define PM8941_WLED_REG_OVP 0x4d >> -#define PM8941_WLED_REG_OVP_MASK 0x03 >> +#define WLED3_CTRL_REG_ILIMIT 0x4e >> +#define WLED3_CTRL_REG_ILIMIT_MASK 0x07 >> -#define PM8941_WLED_REG_BOOST 0x4e >> -#define PM8941_WLED_REG_BOOST_MASK 0x07 >> +/* WLED3 sink registers */ >> +#define WLED3_SINK_REG_SYNC 0x47 >> +#define WLED3_SINK_REG_SYNC_MASK 0x07 >> +#define WLED3_SINK_REG_SYNC_LED1 BIT(0) >> +#define WLED3_SINK_REG_SYNC_LED2 BIT(1) >> +#define WLED3_SINK_REG_SYNC_LED3 BIT(2) >> +#define WLED3_SINK_REG_SYNC_ALL 0x07 >> +#define WLED3_SINK_REG_SYNC_CLEAR 0x00 >> -#define PM8941_WLED_REG_SINK 0x4f >> -#define PM8941_WLED_REG_SINK_MASK 0xe0 >> -#define PM8941_WLED_REG_SINK_SHFT 0x05 >> +#define WLED3_SINK_REG_CURR_SINK 0x4f >> +#define WLED3_SINK_REG_CURR_SINK_MASK 0xe0 >> +#define WLED3_SINK_REG_CURR_SINK_SHFT 0x05 >> -/* Per-'string' registers below */ >> -#define PM8941_WLED_REG_STR_OFFSET 0x10 >> +/* WLED3 per-'string' registers below */ >> +#define WLED3_SINK_REG_STR_OFFSET 0x10 >> -#define PM8941_WLED_REG_STR_MOD_EN_BASE 0x60 >> -#define PM8941_WLED_REG_STR_MOD_MASK BIT(7) >> -#define PM8941_WLED_REG_STR_MOD_EN BIT(7) >> +#define WLED3_SINK_REG_STR_MOD_EN_BASE 0x60 >> +#define WLED3_SINK_REG_STR_MOD_MASK BIT(7) >> +#define WLED3_SINK_REG_STR_MOD_EN BIT(7) >> -#define PM8941_WLED_REG_STR_SCALE_BASE 0x62 >> -#define PM8941_WLED_REG_STR_SCALE_MASK 0x1f >> +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR 0x62 >> +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK 0x1f >> -#define PM8941_WLED_REG_STR_MOD_SRC_BASE 0x63 >> -#define PM8941_WLED_REG_STR_MOD_SRC_MASK 0x01 >> -#define PM8941_WLED_REG_STR_MOD_SRC_INT 0x00 >> -#define PM8941_WLED_REG_STR_MOD_SRC_EXT 0x01 >> +#define WLED3_SINK_REG_STR_MOD_SRC_BASE 0x63 >> +#define WLED3_SINK_REG_STR_MOD_SRC_MASK 0x01 >> +#define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00 >> +#define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01 >> -#define PM8941_WLED_REG_STR_CABC_BASE 0x66 >> -#define PM8941_WLED_REG_STR_CABC_MASK BIT(7) >> -#define PM8941_WLED_REG_STR_CABC_EN BIT(7) >> +#define WLED3_SINK_REG_STR_CABC_BASE 0x66 >> +#define WLED3_SINK_REG_STR_CABC_MASK BIT(7) >> +#define WLED3_SINK_REG_STR_CABC_EN BIT(7) >> -struct pm8941_wled_config { >> - u32 i_boost_limit; >> +struct wled_config { >> + u32 boost_i_limit; >> u32 ovp; >> u32 switch_freq; >> u32 num_strings; >> - u32 i_limit; >> + u32 string_i_limit; > > This patch implements a grand renaming and I have no objections to > including change for boost_i_limit and string_i_limit in it. I'd > prefer it to be mentioned in the patch header though. > > Once that is done: > > Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Thanks Daneil. I will include it in the patch header in next series. -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon 09 Jul 03:22 PDT 2018, Kiran Gunda wrote: > Rename the PM8941* references as WLED3 to make the > driver generic and have WLED support for other PMICs. > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> I agree with Daniel, regarding the mentioning of the variable rename. Apart from that: Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > Changes from V3: > - Changed the MODULE_DESCRIPTION > > drivers/video/backlight/qcom-wled.c | 248 ++++++++++++++++++------------------ > 1 file changed, 125 insertions(+), 123 deletions(-) > > diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c > index 0b6d219..3cd6e75 100644 > --- a/drivers/video/backlight/qcom-wled.c > +++ b/drivers/video/backlight/qcom-wled.c > @@ -18,77 +18,79 @@ > #include <linux/regmap.h> > > /* From DT binding */ > -#define PM8941_WLED_DEFAULT_BRIGHTNESS 2048 > +#define WLED_DEFAULT_BRIGHTNESS 2048 > > -#define PM8941_WLED_REG_VAL_BASE 0x40 > -#define PM8941_WLED_REG_VAL_MAX 0xFFF > +#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF > +#define WLED3_CTRL_REG_VAL_BASE 0x40 > > -#define PM8941_WLED_REG_MOD_EN 0x46 > -#define PM8941_WLED_REG_MOD_EN_BIT BIT(7) > -#define PM8941_WLED_REG_MOD_EN_MASK BIT(7) > +/* WLED3 control registers */ > +#define WLED3_CTRL_REG_MOD_EN 0x46 > +#define WLED3_CTRL_REG_MOD_EN_BIT BIT(7) > +#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) > > -#define PM8941_WLED_REG_SYNC 0x47 > -#define PM8941_WLED_REG_SYNC_MASK 0x07 > -#define PM8941_WLED_REG_SYNC_LED1 BIT(0) > -#define PM8941_WLED_REG_SYNC_LED2 BIT(1) > -#define PM8941_WLED_REG_SYNC_LED3 BIT(2) > -#define PM8941_WLED_REG_SYNC_ALL 0x07 > -#define PM8941_WLED_REG_SYNC_CLEAR 0x00 > +#define WLED3_CTRL_REG_FREQ 0x4c > +#define WLED3_CTRL_REG_FREQ_MASK 0x0f > > -#define PM8941_WLED_REG_FREQ 0x4c > -#define PM8941_WLED_REG_FREQ_MASK 0x0f > +#define WLED3_CTRL_REG_OVP 0x4d > +#define WLED3_CTRL_REG_OVP_MASK 0x03 > > -#define PM8941_WLED_REG_OVP 0x4d > -#define PM8941_WLED_REG_OVP_MASK 0x03 > +#define WLED3_CTRL_REG_ILIMIT 0x4e > +#define WLED3_CTRL_REG_ILIMIT_MASK 0x07 > > -#define PM8941_WLED_REG_BOOST 0x4e > -#define PM8941_WLED_REG_BOOST_MASK 0x07 > +/* WLED3 sink registers */ > +#define WLED3_SINK_REG_SYNC 0x47 > +#define WLED3_SINK_REG_SYNC_MASK 0x07 > +#define WLED3_SINK_REG_SYNC_LED1 BIT(0) > +#define WLED3_SINK_REG_SYNC_LED2 BIT(1) > +#define WLED3_SINK_REG_SYNC_LED3 BIT(2) > +#define WLED3_SINK_REG_SYNC_ALL 0x07 > +#define WLED3_SINK_REG_SYNC_CLEAR 0x00 > > -#define PM8941_WLED_REG_SINK 0x4f > -#define PM8941_WLED_REG_SINK_MASK 0xe0 > -#define PM8941_WLED_REG_SINK_SHFT 0x05 > +#define WLED3_SINK_REG_CURR_SINK 0x4f > +#define WLED3_SINK_REG_CURR_SINK_MASK 0xe0 > +#define WLED3_SINK_REG_CURR_SINK_SHFT 0x05 > > -/* Per-'string' registers below */ > -#define PM8941_WLED_REG_STR_OFFSET 0x10 > +/* WLED3 per-'string' registers below */ > +#define WLED3_SINK_REG_STR_OFFSET 0x10 > > -#define PM8941_WLED_REG_STR_MOD_EN_BASE 0x60 > -#define PM8941_WLED_REG_STR_MOD_MASK BIT(7) > -#define PM8941_WLED_REG_STR_MOD_EN BIT(7) > +#define WLED3_SINK_REG_STR_MOD_EN_BASE 0x60 > +#define WLED3_SINK_REG_STR_MOD_MASK BIT(7) > +#define WLED3_SINK_REG_STR_MOD_EN BIT(7) > > -#define PM8941_WLED_REG_STR_SCALE_BASE 0x62 > -#define PM8941_WLED_REG_STR_SCALE_MASK 0x1f > +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR 0x62 > +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK 0x1f > > -#define PM8941_WLED_REG_STR_MOD_SRC_BASE 0x63 > -#define PM8941_WLED_REG_STR_MOD_SRC_MASK 0x01 > -#define PM8941_WLED_REG_STR_MOD_SRC_INT 0x00 > -#define PM8941_WLED_REG_STR_MOD_SRC_EXT 0x01 > +#define WLED3_SINK_REG_STR_MOD_SRC_BASE 0x63 > +#define WLED3_SINK_REG_STR_MOD_SRC_MASK 0x01 > +#define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00 > +#define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01 > > -#define PM8941_WLED_REG_STR_CABC_BASE 0x66 > -#define PM8941_WLED_REG_STR_CABC_MASK BIT(7) > -#define PM8941_WLED_REG_STR_CABC_EN BIT(7) > +#define WLED3_SINK_REG_STR_CABC_BASE 0x66 > +#define WLED3_SINK_REG_STR_CABC_MASK BIT(7) > +#define WLED3_SINK_REG_STR_CABC_EN BIT(7) > > -struct pm8941_wled_config { > - u32 i_boost_limit; > +struct wled_config { > + u32 boost_i_limit; > u32 ovp; > u32 switch_freq; > u32 num_strings; > - u32 i_limit; > + u32 string_i_limit; > bool cs_out_en; > bool ext_gen; > bool cabc_en; > }; > > -struct pm8941_wled { > +struct wled { > const char *name; > struct regmap *regmap; > u16 addr; > > - struct pm8941_wled_config cfg; > + struct wled_config cfg; > }; > > -static int pm8941_wled_update_status(struct backlight_device *bl) > +static int wled_update_status(struct backlight_device *bl) > { > - struct pm8941_wled *wled = bl_get_data(bl); > + struct wled *wled = bl_get_data(bl); > u16 val = bl->props.brightness; > u8 ctrl = 0; > int rc; > @@ -100,11 +102,11 @@ static int pm8941_wled_update_status(struct backlight_device *bl) > val = 0; > > if (val != 0) > - ctrl = PM8941_WLED_REG_MOD_EN_BIT; > + ctrl = WLED3_CTRL_REG_MOD_EN_BIT; > > rc = regmap_update_bits(wled->regmap, > - wled->addr + PM8941_WLED_REG_MOD_EN, > - PM8941_WLED_REG_MOD_EN_MASK, ctrl); > + wled->addr + WLED3_CTRL_REG_MOD_EN, > + WLED3_CTRL_REG_MOD_EN_MASK, ctrl); > if (rc) > return rc; > > @@ -112,89 +114,89 @@ static int pm8941_wled_update_status(struct backlight_device *bl) > u8 v[2] = { val & 0xff, (val >> 8) & 0xf }; > > rc = regmap_bulk_write(wled->regmap, > - wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i, > + wled->addr + WLED3_CTRL_REG_VAL_BASE + 2 * i, > v, 2); > if (rc) > return rc; > } > > rc = regmap_update_bits(wled->regmap, > - wled->addr + PM8941_WLED_REG_SYNC, > - PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL); > + wled->addr + WLED3_SINK_REG_SYNC, > + WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_ALL); > if (rc) > return rc; > > rc = regmap_update_bits(wled->regmap, > - wled->addr + PM8941_WLED_REG_SYNC, > - PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR); > + wled->addr + WLED3_SINK_REG_SYNC, > + WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_CLEAR); > return rc; > } > > -static int pm8941_wled_setup(struct pm8941_wled *wled) > +static int wled_setup(struct wled *wled) > { > int rc; > int i; > > rc = regmap_update_bits(wled->regmap, > - wled->addr + PM8941_WLED_REG_OVP, > - PM8941_WLED_REG_OVP_MASK, wled->cfg.ovp); > + wled->addr + WLED3_CTRL_REG_OVP, > + WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); > if (rc) > return rc; > > rc = regmap_update_bits(wled->regmap, > - wled->addr + PM8941_WLED_REG_BOOST, > - PM8941_WLED_REG_BOOST_MASK, wled->cfg.i_boost_limit); > + wled->addr + WLED3_CTRL_REG_ILIMIT, > + WLED3_CTRL_REG_ILIMIT_MASK, wled->cfg.boost_i_limit); > if (rc) > return rc; > > rc = regmap_update_bits(wled->regmap, > - wled->addr + PM8941_WLED_REG_FREQ, > - PM8941_WLED_REG_FREQ_MASK, wled->cfg.switch_freq); > + wled->addr + WLED3_CTRL_REG_FREQ, > + WLED3_CTRL_REG_FREQ_MASK, wled->cfg.switch_freq); > if (rc) > return rc; > > if (wled->cfg.cs_out_en) { > u8 all = (BIT(wled->cfg.num_strings) - 1) > - << PM8941_WLED_REG_SINK_SHFT; > + << WLED3_SINK_REG_CURR_SINK_SHFT; > > rc = regmap_update_bits(wled->regmap, > - wled->addr + PM8941_WLED_REG_SINK, > - PM8941_WLED_REG_SINK_MASK, all); > + wled->addr + WLED3_SINK_REG_CURR_SINK, > + WLED3_SINK_REG_CURR_SINK_MASK, all); > if (rc) > return rc; > } > > for (i = 0; i < wled->cfg.num_strings; ++i) { > - u16 addr = wled->addr + PM8941_WLED_REG_STR_OFFSET * i; > + u16 addr = wled->addr + WLED3_SINK_REG_STR_OFFSET * i; > > rc = regmap_update_bits(wled->regmap, > - addr + PM8941_WLED_REG_STR_MOD_EN_BASE, > - PM8941_WLED_REG_STR_MOD_MASK, > - PM8941_WLED_REG_STR_MOD_EN); > + addr + WLED3_SINK_REG_STR_MOD_EN_BASE, > + WLED3_SINK_REG_STR_MOD_MASK, > + WLED3_SINK_REG_STR_MOD_EN); > if (rc) > return rc; > > if (wled->cfg.ext_gen) { > rc = regmap_update_bits(wled->regmap, > - addr + PM8941_WLED_REG_STR_MOD_SRC_BASE, > - PM8941_WLED_REG_STR_MOD_SRC_MASK, > - PM8941_WLED_REG_STR_MOD_SRC_EXT); > + addr + WLED3_SINK_REG_STR_MOD_SRC_BASE, > + WLED3_SINK_REG_STR_MOD_SRC_MASK, > + WLED3_SINK_REG_STR_MOD_SRC_EXT); > if (rc) > return rc; > } > > rc = regmap_update_bits(wled->regmap, > - addr + PM8941_WLED_REG_STR_SCALE_BASE, > - PM8941_WLED_REG_STR_SCALE_MASK, > - wled->cfg.i_limit); > + addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR, > + WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK, > + wled->cfg.string_i_limit); > if (rc) > return rc; > > rc = regmap_update_bits(wled->regmap, > - addr + PM8941_WLED_REG_STR_CABC_BASE, > - PM8941_WLED_REG_STR_CABC_MASK, > + addr + WLED3_SINK_REG_STR_CABC_BASE, > + WLED3_SINK_REG_STR_CABC_MASK, > wled->cfg.cabc_en ? > - PM8941_WLED_REG_STR_CABC_EN : 0); > + WLED3_SINK_REG_STR_CABC_EN : 0); > if (rc) > return rc; > } > @@ -202,9 +204,9 @@ static int pm8941_wled_setup(struct pm8941_wled *wled) > return 0; > } > > -static const struct pm8941_wled_config pm8941_wled_config_defaults = { > - .i_boost_limit = 3, > - .i_limit = 20, > +static const struct wled_config wled3_config_defaults = { > + .boost_i_limit = 3, > + .string_i_limit = 20, > .ovp = 2, > .switch_freq = 5, > .num_strings = 0, > @@ -213,55 +215,55 @@ static int pm8941_wled_setup(struct pm8941_wled *wled) > .cabc_en = false, > }; > > -struct pm8941_wled_var_cfg { > +struct wled_var_cfg { > const u32 *values; > u32 (*fn)(u32); > int size; > }; > > -static const u32 pm8941_wled_i_boost_limit_values[] = { > +static const u32 wled3_boost_i_limit_values[] = { > 105, 385, 525, 805, 980, 1260, 1400, 1680, > }; > > -static const struct pm8941_wled_var_cfg pm8941_wled_i_boost_limit_cfg = { > - .values = pm8941_wled_i_boost_limit_values, > - .size = ARRAY_SIZE(pm8941_wled_i_boost_limit_values), > +static const struct wled_var_cfg wled3_boost_i_limit_cfg = { > + .values = wled3_boost_i_limit_values, > + .size = ARRAY_SIZE(wled3_boost_i_limit_values), > }; > > -static const u32 pm8941_wled_ovp_values[] = { > +static const u32 wled3_ovp_values[] = { > 35, 32, 29, 27, > }; > > -static const struct pm8941_wled_var_cfg pm8941_wled_ovp_cfg = { > - .values = pm8941_wled_ovp_values, > - .size = ARRAY_SIZE(pm8941_wled_ovp_values), > +static const struct wled_var_cfg wled3_ovp_cfg = { > + .values = wled3_ovp_values, > + .size = ARRAY_SIZE(wled3_ovp_values), > }; > > -static u32 pm8941_wled_num_strings_values_fn(u32 idx) > +static u32 wled3_num_strings_values_fn(u32 idx) > { > return idx + 1; > } > > -static const struct pm8941_wled_var_cfg pm8941_wled_num_strings_cfg = { > - .fn = pm8941_wled_num_strings_values_fn, > +static const struct wled_var_cfg wled3_num_strings_cfg = { > + .fn = wled3_num_strings_values_fn, > .size = 3, > }; > > -static u32 pm8941_wled_switch_freq_values_fn(u32 idx) > +static u32 wled3_switch_freq_values_fn(u32 idx) > { > return 19200 / (2 * (1 + idx)); > } > > -static const struct pm8941_wled_var_cfg pm8941_wled_switch_freq_cfg = { > - .fn = pm8941_wled_switch_freq_values_fn, > +static const struct wled_var_cfg wled3_switch_freq_cfg = { > + .fn = wled3_switch_freq_values_fn, > .size = 16, > }; > > -static const struct pm8941_wled_var_cfg pm8941_wled_i_limit_cfg = { > +static const struct wled_var_cfg wled3_string_i_limit_cfg = { > .size = 26, > }; > > -static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, u32 idx) > +static u32 wled3_values(const struct wled_var_cfg *cfg, u32 idx) > { > if (idx >= cfg->size) > return UINT_MAX; > @@ -272,9 +274,9 @@ static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, u32 idx) > return idx; > } > > -static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) > +static int wled_configure(struct wled *wled, struct device *dev) > { > - struct pm8941_wled_config *cfg = &wled->cfg; > + struct wled_config *cfg = &wled->cfg; > u32 val; > int rc; > u32 c; > @@ -284,32 +286,32 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) > const struct { > const char *name; > u32 *val_ptr; > - const struct pm8941_wled_var_cfg *cfg; > + const struct wled_var_cfg *cfg; > } u32_opts[] = { > { > "qcom,current-boost-limit", > - &cfg->i_boost_limit, > - .cfg = &pm8941_wled_i_boost_limit_cfg, > + &cfg->boost_i_limit, > + .cfg = &wled3_boost_i_limit_cfg, > }, > { > "qcom,current-limit", > - &cfg->i_limit, > - .cfg = &pm8941_wled_i_limit_cfg, > + &cfg->string_i_limit, > + .cfg = &wled3_string_i_limit_cfg, > }, > { > "qcom,ovp", > &cfg->ovp, > - .cfg = &pm8941_wled_ovp_cfg, > + .cfg = &wled3_ovp_cfg, > }, > { > "qcom,switching-freq", > &cfg->switch_freq, > - .cfg = &pm8941_wled_switch_freq_cfg, > + .cfg = &wled3_switch_freq_cfg, > }, > { > "qcom,num-strings", > &cfg->num_strings, > - .cfg = &pm8941_wled_num_strings_cfg, > + .cfg = &wled3_num_strings_cfg, > }, > }; > const struct { > @@ -332,7 +334,7 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) > if (rc) > wled->name = dev->of_node->name; > > - *cfg = pm8941_wled_config_defaults; > + *cfg = wled3_config_defaults; > for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) { > rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); > if (rc == -EINVAL) { > @@ -344,7 +346,7 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) > > c = UINT_MAX; > for (j = 0; c != val; j++) { > - c = pm8941_wled_values(u32_opts[i].cfg, j); > + c = wled3_values(u32_opts[i].cfg, j); > if (c == UINT_MAX) { > dev_err(dev, "invalid value for '%s'\n", > u32_opts[i].name); > @@ -366,15 +368,15 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) > return 0; > } > > -static const struct backlight_ops pm8941_wled_ops = { > - .update_status = pm8941_wled_update_status, > +static const struct backlight_ops wled_ops = { > + .update_status = wled_update_status, > }; > > -static int pm8941_wled_probe(struct platform_device *pdev) > +static int wled_probe(struct platform_device *pdev) > { > struct backlight_properties props; > struct backlight_device *bl; > - struct pm8941_wled *wled; > + struct wled *wled; > struct regmap *regmap; > u32 val; > int rc; > @@ -391,42 +393,42 @@ static int pm8941_wled_probe(struct platform_device *pdev) > > wled->regmap = regmap; > > - rc = pm8941_wled_configure(wled, &pdev->dev); > + rc = wled_configure(wled, &pdev->dev); > if (rc) > return rc; > > - rc = pm8941_wled_setup(wled); > + rc = wled_setup(wled); > if (rc) > return rc; > > - val = PM8941_WLED_DEFAULT_BRIGHTNESS; > + val = WLED_DEFAULT_BRIGHTNESS; > of_property_read_u32(pdev->dev.of_node, "default-brightness", &val); > > memset(&props, 0, sizeof(struct backlight_properties)); > props.type = BACKLIGHT_RAW; > props.brightness = val; > - props.max_brightness = PM8941_WLED_REG_VAL_MAX; > + props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX; > bl = devm_backlight_device_register(&pdev->dev, wled->name, > &pdev->dev, wled, > - &pm8941_wled_ops, &props); > + &wled_ops, &props); > return PTR_ERR_OR_ZERO(bl); > }; > > -static const struct of_device_id pm8941_wled_match_table[] = { > +static const struct of_device_id wled_match_table[] = { > { .compatible = "qcom,pm8941-wled" }, > {} > }; > -MODULE_DEVICE_TABLE(of, pm8941_wled_match_table); > +MODULE_DEVICE_TABLE(of, wled_match_table); > > -static struct platform_driver pm8941_wled_driver = { > - .probe = pm8941_wled_probe, > +static struct platform_driver wled_driver = { > + .probe = wled_probe, > .driver = { > - .name = "pm8941-wled", > - .of_match_table = pm8941_wled_match_table, > + .name = "qcom,wled", > + .of_match_table = wled_match_table, > }, > }; > > -module_platform_driver(pm8941_wled_driver); > +module_platform_driver(wled_driver); > > -MODULE_DESCRIPTION("pm8941 wled driver"); > +MODULE_DESCRIPTION("Qualcomm WLED driver"); > MODULE_LICENSE("GPL v2"); > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2018-08-07 11:11, Bjorn Andersson wrote: > On Mon 09 Jul 03:22 PDT 2018, Kiran Gunda wrote: > >> Rename the PM8941* references as WLED3 to make the >> driver generic and have WLED support for other PMICs. >> >> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> > > I agree with Daniel, regarding the mentioning of the variable rename. > Yes. As Daniel asked I will update the commit text. > Apart from that: > > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > Regards, > Bjorn > >> --- >> Changes from V3: >> - Changed the MODULE_DESCRIPTION >> >> drivers/video/backlight/qcom-wled.c | 248 >> ++++++++++++++++++------------------ >> 1 file changed, 125 insertions(+), 123 deletions(-) >> >> diff --git a/drivers/video/backlight/qcom-wled.c >> b/drivers/video/backlight/qcom-wled.c >> index 0b6d219..3cd6e75 100644 >> --- a/drivers/video/backlight/qcom-wled.c >> +++ b/drivers/video/backlight/qcom-wled.c >> @@ -18,77 +18,79 @@ >> #include <linux/regmap.h> >> >> /* From DT binding */ >> -#define PM8941_WLED_DEFAULT_BRIGHTNESS 2048 >> +#define WLED_DEFAULT_BRIGHTNESS 2048 >> >> -#define PM8941_WLED_REG_VAL_BASE 0x40 >> -#define PM8941_WLED_REG_VAL_MAX 0xFFF >> +#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF >> +#define WLED3_CTRL_REG_VAL_BASE 0x40 >> >> -#define PM8941_WLED_REG_MOD_EN 0x46 >> -#define PM8941_WLED_REG_MOD_EN_BIT BIT(7) >> -#define PM8941_WLED_REG_MOD_EN_MASK BIT(7) >> +/* WLED3 control registers */ >> +#define WLED3_CTRL_REG_MOD_EN 0x46 >> +#define WLED3_CTRL_REG_MOD_EN_BIT BIT(7) >> +#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) >> >> -#define PM8941_WLED_REG_SYNC 0x47 >> -#define PM8941_WLED_REG_SYNC_MASK 0x07 >> -#define PM8941_WLED_REG_SYNC_LED1 BIT(0) >> -#define PM8941_WLED_REG_SYNC_LED2 BIT(1) >> -#define PM8941_WLED_REG_SYNC_LED3 BIT(2) >> -#define PM8941_WLED_REG_SYNC_ALL 0x07 >> -#define PM8941_WLED_REG_SYNC_CLEAR 0x00 >> +#define WLED3_CTRL_REG_FREQ 0x4c >> +#define WLED3_CTRL_REG_FREQ_MASK 0x0f >> >> -#define PM8941_WLED_REG_FREQ 0x4c >> -#define PM8941_WLED_REG_FREQ_MASK 0x0f >> +#define WLED3_CTRL_REG_OVP 0x4d >> +#define WLED3_CTRL_REG_OVP_MASK 0x03 >> >> -#define PM8941_WLED_REG_OVP 0x4d >> -#define PM8941_WLED_REG_OVP_MASK 0x03 >> +#define WLED3_CTRL_REG_ILIMIT 0x4e >> +#define WLED3_CTRL_REG_ILIMIT_MASK 0x07 >> >> -#define PM8941_WLED_REG_BOOST 0x4e >> -#define PM8941_WLED_REG_BOOST_MASK 0x07 >> +/* WLED3 sink registers */ >> +#define WLED3_SINK_REG_SYNC 0x47 >> +#define WLED3_SINK_REG_SYNC_MASK 0x07 >> +#define WLED3_SINK_REG_SYNC_LED1 BIT(0) >> +#define WLED3_SINK_REG_SYNC_LED2 BIT(1) >> +#define WLED3_SINK_REG_SYNC_LED3 BIT(2) >> +#define WLED3_SINK_REG_SYNC_ALL 0x07 >> +#define WLED3_SINK_REG_SYNC_CLEAR 0x00 >> >> -#define PM8941_WLED_REG_SINK 0x4f >> -#define PM8941_WLED_REG_SINK_MASK 0xe0 >> -#define PM8941_WLED_REG_SINK_SHFT 0x05 >> +#define WLED3_SINK_REG_CURR_SINK 0x4f >> +#define WLED3_SINK_REG_CURR_SINK_MASK 0xe0 >> +#define WLED3_SINK_REG_CURR_SINK_SHFT 0x05 >> >> -/* Per-'string' registers below */ >> -#define PM8941_WLED_REG_STR_OFFSET 0x10 >> +/* WLED3 per-'string' registers below */ >> +#define WLED3_SINK_REG_STR_OFFSET 0x10 >> >> -#define PM8941_WLED_REG_STR_MOD_EN_BASE 0x60 >> -#define PM8941_WLED_REG_STR_MOD_MASK BIT(7) >> -#define PM8941_WLED_REG_STR_MOD_EN BIT(7) >> +#define WLED3_SINK_REG_STR_MOD_EN_BASE 0x60 >> +#define WLED3_SINK_REG_STR_MOD_MASK BIT(7) >> +#define WLED3_SINK_REG_STR_MOD_EN BIT(7) >> >> -#define PM8941_WLED_REG_STR_SCALE_BASE 0x62 >> -#define PM8941_WLED_REG_STR_SCALE_MASK 0x1f >> +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR 0x62 >> +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK 0x1f >> >> -#define PM8941_WLED_REG_STR_MOD_SRC_BASE 0x63 >> -#define PM8941_WLED_REG_STR_MOD_SRC_MASK 0x01 >> -#define PM8941_WLED_REG_STR_MOD_SRC_INT 0x00 >> -#define PM8941_WLED_REG_STR_MOD_SRC_EXT 0x01 >> +#define WLED3_SINK_REG_STR_MOD_SRC_BASE 0x63 >> +#define WLED3_SINK_REG_STR_MOD_SRC_MASK 0x01 >> +#define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00 >> +#define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01 >> >> -#define PM8941_WLED_REG_STR_CABC_BASE 0x66 >> -#define PM8941_WLED_REG_STR_CABC_MASK BIT(7) >> -#define PM8941_WLED_REG_STR_CABC_EN BIT(7) >> +#define WLED3_SINK_REG_STR_CABC_BASE 0x66 >> +#define WLED3_SINK_REG_STR_CABC_MASK BIT(7) >> +#define WLED3_SINK_REG_STR_CABC_EN BIT(7) >> >> -struct pm8941_wled_config { >> - u32 i_boost_limit; >> +struct wled_config { >> + u32 boost_i_limit; >> u32 ovp; >> u32 switch_freq; >> u32 num_strings; >> - u32 i_limit; >> + u32 string_i_limit; >> bool cs_out_en; >> bool ext_gen; >> bool cabc_en; >> }; >> >> -struct pm8941_wled { >> +struct wled { >> const char *name; >> struct regmap *regmap; >> u16 addr; >> >> - struct pm8941_wled_config cfg; >> + struct wled_config cfg; >> }; >> >> -static int pm8941_wled_update_status(struct backlight_device *bl) >> +static int wled_update_status(struct backlight_device *bl) >> { >> - struct pm8941_wled *wled = bl_get_data(bl); >> + struct wled *wled = bl_get_data(bl); >> u16 val = bl->props.brightness; >> u8 ctrl = 0; >> int rc; >> @@ -100,11 +102,11 @@ static int pm8941_wled_update_status(struct >> backlight_device *bl) >> val = 0; >> >> if (val != 0) >> - ctrl = PM8941_WLED_REG_MOD_EN_BIT; >> + ctrl = WLED3_CTRL_REG_MOD_EN_BIT; >> >> rc = regmap_update_bits(wled->regmap, >> - wled->addr + PM8941_WLED_REG_MOD_EN, >> - PM8941_WLED_REG_MOD_EN_MASK, ctrl); >> + wled->addr + WLED3_CTRL_REG_MOD_EN, >> + WLED3_CTRL_REG_MOD_EN_MASK, ctrl); >> if (rc) >> return rc; >> >> @@ -112,89 +114,89 @@ static int pm8941_wled_update_status(struct >> backlight_device *bl) >> u8 v[2] = { val & 0xff, (val >> 8) & 0xf }; >> >> rc = regmap_bulk_write(wled->regmap, >> - wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i, >> + wled->addr + WLED3_CTRL_REG_VAL_BASE + 2 * i, >> v, 2); >> if (rc) >> return rc; >> } >> >> rc = regmap_update_bits(wled->regmap, >> - wled->addr + PM8941_WLED_REG_SYNC, >> - PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL); >> + wled->addr + WLED3_SINK_REG_SYNC, >> + WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_ALL); >> if (rc) >> return rc; >> >> rc = regmap_update_bits(wled->regmap, >> - wled->addr + PM8941_WLED_REG_SYNC, >> - PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR); >> + wled->addr + WLED3_SINK_REG_SYNC, >> + WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_CLEAR); >> return rc; >> } >> >> -static int pm8941_wled_setup(struct pm8941_wled *wled) >> +static int wled_setup(struct wled *wled) >> { >> int rc; >> int i; >> >> rc = regmap_update_bits(wled->regmap, >> - wled->addr + PM8941_WLED_REG_OVP, >> - PM8941_WLED_REG_OVP_MASK, wled->cfg.ovp); >> + wled->addr + WLED3_CTRL_REG_OVP, >> + WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); >> if (rc) >> return rc; >> >> rc = regmap_update_bits(wled->regmap, >> - wled->addr + PM8941_WLED_REG_BOOST, >> - PM8941_WLED_REG_BOOST_MASK, wled->cfg.i_boost_limit); >> + wled->addr + WLED3_CTRL_REG_ILIMIT, >> + WLED3_CTRL_REG_ILIMIT_MASK, wled->cfg.boost_i_limit); >> if (rc) >> return rc; >> >> rc = regmap_update_bits(wled->regmap, >> - wled->addr + PM8941_WLED_REG_FREQ, >> - PM8941_WLED_REG_FREQ_MASK, wled->cfg.switch_freq); >> + wled->addr + WLED3_CTRL_REG_FREQ, >> + WLED3_CTRL_REG_FREQ_MASK, wled->cfg.switch_freq); >> if (rc) >> return rc; >> >> if (wled->cfg.cs_out_en) { >> u8 all = (BIT(wled->cfg.num_strings) - 1) >> - << PM8941_WLED_REG_SINK_SHFT; >> + << WLED3_SINK_REG_CURR_SINK_SHFT; >> >> rc = regmap_update_bits(wled->regmap, >> - wled->addr + PM8941_WLED_REG_SINK, >> - PM8941_WLED_REG_SINK_MASK, all); >> + wled->addr + WLED3_SINK_REG_CURR_SINK, >> + WLED3_SINK_REG_CURR_SINK_MASK, all); >> if (rc) >> return rc; >> } >> >> for (i = 0; i < wled->cfg.num_strings; ++i) { >> - u16 addr = wled->addr + PM8941_WLED_REG_STR_OFFSET * i; >> + u16 addr = wled->addr + WLED3_SINK_REG_STR_OFFSET * i; >> >> rc = regmap_update_bits(wled->regmap, >> - addr + PM8941_WLED_REG_STR_MOD_EN_BASE, >> - PM8941_WLED_REG_STR_MOD_MASK, >> - PM8941_WLED_REG_STR_MOD_EN); >> + addr + WLED3_SINK_REG_STR_MOD_EN_BASE, >> + WLED3_SINK_REG_STR_MOD_MASK, >> + WLED3_SINK_REG_STR_MOD_EN); >> if (rc) >> return rc; >> >> if (wled->cfg.ext_gen) { >> rc = regmap_update_bits(wled->regmap, >> - addr + PM8941_WLED_REG_STR_MOD_SRC_BASE, >> - PM8941_WLED_REG_STR_MOD_SRC_MASK, >> - PM8941_WLED_REG_STR_MOD_SRC_EXT); >> + addr + WLED3_SINK_REG_STR_MOD_SRC_BASE, >> + WLED3_SINK_REG_STR_MOD_SRC_MASK, >> + WLED3_SINK_REG_STR_MOD_SRC_EXT); >> if (rc) >> return rc; >> } >> >> rc = regmap_update_bits(wled->regmap, >> - addr + PM8941_WLED_REG_STR_SCALE_BASE, >> - PM8941_WLED_REG_STR_SCALE_MASK, >> - wled->cfg.i_limit); >> + addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR, >> + WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK, >> + wled->cfg.string_i_limit); >> if (rc) >> return rc; >> >> rc = regmap_update_bits(wled->regmap, >> - addr + PM8941_WLED_REG_STR_CABC_BASE, >> - PM8941_WLED_REG_STR_CABC_MASK, >> + addr + WLED3_SINK_REG_STR_CABC_BASE, >> + WLED3_SINK_REG_STR_CABC_MASK, >> wled->cfg.cabc_en ? >> - PM8941_WLED_REG_STR_CABC_EN : 0); >> + WLED3_SINK_REG_STR_CABC_EN : 0); >> if (rc) >> return rc; >> } >> @@ -202,9 +204,9 @@ static int pm8941_wled_setup(struct pm8941_wled >> *wled) >> return 0; >> } >> >> -static const struct pm8941_wled_config pm8941_wled_config_defaults = >> { >> - .i_boost_limit = 3, >> - .i_limit = 20, >> +static const struct wled_config wled3_config_defaults = { >> + .boost_i_limit = 3, >> + .string_i_limit = 20, >> .ovp = 2, >> .switch_freq = 5, >> .num_strings = 0, >> @@ -213,55 +215,55 @@ static int pm8941_wled_setup(struct pm8941_wled >> *wled) >> .cabc_en = false, >> }; >> >> -struct pm8941_wled_var_cfg { >> +struct wled_var_cfg { >> const u32 *values; >> u32 (*fn)(u32); >> int size; >> }; >> >> -static const u32 pm8941_wled_i_boost_limit_values[] = { >> +static const u32 wled3_boost_i_limit_values[] = { >> 105, 385, 525, 805, 980, 1260, 1400, 1680, >> }; >> >> -static const struct pm8941_wled_var_cfg pm8941_wled_i_boost_limit_cfg >> = { >> - .values = pm8941_wled_i_boost_limit_values, >> - .size = ARRAY_SIZE(pm8941_wled_i_boost_limit_values), >> +static const struct wled_var_cfg wled3_boost_i_limit_cfg = { >> + .values = wled3_boost_i_limit_values, >> + .size = ARRAY_SIZE(wled3_boost_i_limit_values), >> }; >> >> -static const u32 pm8941_wled_ovp_values[] = { >> +static const u32 wled3_ovp_values[] = { >> 35, 32, 29, 27, >> }; >> >> -static const struct pm8941_wled_var_cfg pm8941_wled_ovp_cfg = { >> - .values = pm8941_wled_ovp_values, >> - .size = ARRAY_SIZE(pm8941_wled_ovp_values), >> +static const struct wled_var_cfg wled3_ovp_cfg = { >> + .values = wled3_ovp_values, >> + .size = ARRAY_SIZE(wled3_ovp_values), >> }; >> >> -static u32 pm8941_wled_num_strings_values_fn(u32 idx) >> +static u32 wled3_num_strings_values_fn(u32 idx) >> { >> return idx + 1; >> } >> >> -static const struct pm8941_wled_var_cfg pm8941_wled_num_strings_cfg = >> { >> - .fn = pm8941_wled_num_strings_values_fn, >> +static const struct wled_var_cfg wled3_num_strings_cfg = { >> + .fn = wled3_num_strings_values_fn, >> .size = 3, >> }; >> >> -static u32 pm8941_wled_switch_freq_values_fn(u32 idx) >> +static u32 wled3_switch_freq_values_fn(u32 idx) >> { >> return 19200 / (2 * (1 + idx)); >> } >> >> -static const struct pm8941_wled_var_cfg pm8941_wled_switch_freq_cfg = >> { >> - .fn = pm8941_wled_switch_freq_values_fn, >> +static const struct wled_var_cfg wled3_switch_freq_cfg = { >> + .fn = wled3_switch_freq_values_fn, >> .size = 16, >> }; >> >> -static const struct pm8941_wled_var_cfg pm8941_wled_i_limit_cfg = { >> +static const struct wled_var_cfg wled3_string_i_limit_cfg = { >> .size = 26, >> }; >> >> -static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, >> u32 idx) >> +static u32 wled3_values(const struct wled_var_cfg *cfg, u32 idx) >> { >> if (idx >= cfg->size) >> return UINT_MAX; >> @@ -272,9 +274,9 @@ static u32 pm8941_wled_values(const struct >> pm8941_wled_var_cfg *cfg, u32 idx) >> return idx; >> } >> >> -static int pm8941_wled_configure(struct pm8941_wled *wled, struct >> device *dev) >> +static int wled_configure(struct wled *wled, struct device *dev) >> { >> - struct pm8941_wled_config *cfg = &wled->cfg; >> + struct wled_config *cfg = &wled->cfg; >> u32 val; >> int rc; >> u32 c; >> @@ -284,32 +286,32 @@ static int pm8941_wled_configure(struct >> pm8941_wled *wled, struct device *dev) >> const struct { >> const char *name; >> u32 *val_ptr; >> - const struct pm8941_wled_var_cfg *cfg; >> + const struct wled_var_cfg *cfg; >> } u32_opts[] = { >> { >> "qcom,current-boost-limit", >> - &cfg->i_boost_limit, >> - .cfg = &pm8941_wled_i_boost_limit_cfg, >> + &cfg->boost_i_limit, >> + .cfg = &wled3_boost_i_limit_cfg, >> }, >> { >> "qcom,current-limit", >> - &cfg->i_limit, >> - .cfg = &pm8941_wled_i_limit_cfg, >> + &cfg->string_i_limit, >> + .cfg = &wled3_string_i_limit_cfg, >> }, >> { >> "qcom,ovp", >> &cfg->ovp, >> - .cfg = &pm8941_wled_ovp_cfg, >> + .cfg = &wled3_ovp_cfg, >> }, >> { >> "qcom,switching-freq", >> &cfg->switch_freq, >> - .cfg = &pm8941_wled_switch_freq_cfg, >> + .cfg = &wled3_switch_freq_cfg, >> }, >> { >> "qcom,num-strings", >> &cfg->num_strings, >> - .cfg = &pm8941_wled_num_strings_cfg, >> + .cfg = &wled3_num_strings_cfg, >> }, >> }; >> const struct { >> @@ -332,7 +334,7 @@ static int pm8941_wled_configure(struct >> pm8941_wled *wled, struct device *dev) >> if (rc) >> wled->name = dev->of_node->name; >> >> - *cfg = pm8941_wled_config_defaults; >> + *cfg = wled3_config_defaults; >> for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) { >> rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); >> if (rc == -EINVAL) { >> @@ -344,7 +346,7 @@ static int pm8941_wled_configure(struct >> pm8941_wled *wled, struct device *dev) >> >> c = UINT_MAX; >> for (j = 0; c != val; j++) { >> - c = pm8941_wled_values(u32_opts[i].cfg, j); >> + c = wled3_values(u32_opts[i].cfg, j); >> if (c == UINT_MAX) { >> dev_err(dev, "invalid value for '%s'\n", >> u32_opts[i].name); >> @@ -366,15 +368,15 @@ static int pm8941_wled_configure(struct >> pm8941_wled *wled, struct device *dev) >> return 0; >> } >> >> -static const struct backlight_ops pm8941_wled_ops = { >> - .update_status = pm8941_wled_update_status, >> +static const struct backlight_ops wled_ops = { >> + .update_status = wled_update_status, >> }; >> >> -static int pm8941_wled_probe(struct platform_device *pdev) >> +static int wled_probe(struct platform_device *pdev) >> { >> struct backlight_properties props; >> struct backlight_device *bl; >> - struct pm8941_wled *wled; >> + struct wled *wled; >> struct regmap *regmap; >> u32 val; >> int rc; >> @@ -391,42 +393,42 @@ static int pm8941_wled_probe(struct >> platform_device *pdev) >> >> wled->regmap = regmap; >> >> - rc = pm8941_wled_configure(wled, &pdev->dev); >> + rc = wled_configure(wled, &pdev->dev); >> if (rc) >> return rc; >> >> - rc = pm8941_wled_setup(wled); >> + rc = wled_setup(wled); >> if (rc) >> return rc; >> >> - val = PM8941_WLED_DEFAULT_BRIGHTNESS; >> + val = WLED_DEFAULT_BRIGHTNESS; >> of_property_read_u32(pdev->dev.of_node, "default-brightness", &val); >> >> memset(&props, 0, sizeof(struct backlight_properties)); >> props.type = BACKLIGHT_RAW; >> props.brightness = val; >> - props.max_brightness = PM8941_WLED_REG_VAL_MAX; >> + props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX; >> bl = devm_backlight_device_register(&pdev->dev, wled->name, >> &pdev->dev, wled, >> - &pm8941_wled_ops, &props); >> + &wled_ops, &props); >> return PTR_ERR_OR_ZERO(bl); >> }; >> >> -static const struct of_device_id pm8941_wled_match_table[] = { >> +static const struct of_device_id wled_match_table[] = { >> { .compatible = "qcom,pm8941-wled" }, >> {} >> }; >> -MODULE_DEVICE_TABLE(of, pm8941_wled_match_table); >> +MODULE_DEVICE_TABLE(of, wled_match_table); >> >> -static struct platform_driver pm8941_wled_driver = { >> - .probe = pm8941_wled_probe, >> +static struct platform_driver wled_driver = { >> + .probe = wled_probe, >> .driver = { >> - .name = "pm8941-wled", >> - .of_match_table = pm8941_wled_match_table, >> + .name = "qcom,wled", >> + .of_match_table = wled_match_table, >> }, >> }; >> >> -module_platform_driver(pm8941_wled_driver); >> +module_platform_driver(wled_driver); >> >> -MODULE_DESCRIPTION("pm8941 wled driver"); >> +MODULE_DESCRIPTION("Qualcomm WLED driver"); >> MODULE_LICENSE("GPL v2"); >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >> a Linux Foundation Collaborative Project >> > -- > To unsubscribe from this list: send the line "unsubscribe > linux-arm-msm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 0b6d219..3cd6e75 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -18,77 +18,79 @@ #include <linux/regmap.h> /* From DT binding */ -#define PM8941_WLED_DEFAULT_BRIGHTNESS 2048 +#define WLED_DEFAULT_BRIGHTNESS 2048 -#define PM8941_WLED_REG_VAL_BASE 0x40 -#define PM8941_WLED_REG_VAL_MAX 0xFFF +#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF +#define WLED3_CTRL_REG_VAL_BASE 0x40 -#define PM8941_WLED_REG_MOD_EN 0x46 -#define PM8941_WLED_REG_MOD_EN_BIT BIT(7) -#define PM8941_WLED_REG_MOD_EN_MASK BIT(7) +/* WLED3 control registers */ +#define WLED3_CTRL_REG_MOD_EN 0x46 +#define WLED3_CTRL_REG_MOD_EN_BIT BIT(7) +#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) -#define PM8941_WLED_REG_SYNC 0x47 -#define PM8941_WLED_REG_SYNC_MASK 0x07 -#define PM8941_WLED_REG_SYNC_LED1 BIT(0) -#define PM8941_WLED_REG_SYNC_LED2 BIT(1) -#define PM8941_WLED_REG_SYNC_LED3 BIT(2) -#define PM8941_WLED_REG_SYNC_ALL 0x07 -#define PM8941_WLED_REG_SYNC_CLEAR 0x00 +#define WLED3_CTRL_REG_FREQ 0x4c +#define WLED3_CTRL_REG_FREQ_MASK 0x0f -#define PM8941_WLED_REG_FREQ 0x4c -#define PM8941_WLED_REG_FREQ_MASK 0x0f +#define WLED3_CTRL_REG_OVP 0x4d +#define WLED3_CTRL_REG_OVP_MASK 0x03 -#define PM8941_WLED_REG_OVP 0x4d -#define PM8941_WLED_REG_OVP_MASK 0x03 +#define WLED3_CTRL_REG_ILIMIT 0x4e +#define WLED3_CTRL_REG_ILIMIT_MASK 0x07 -#define PM8941_WLED_REG_BOOST 0x4e -#define PM8941_WLED_REG_BOOST_MASK 0x07 +/* WLED3 sink registers */ +#define WLED3_SINK_REG_SYNC 0x47 +#define WLED3_SINK_REG_SYNC_MASK 0x07 +#define WLED3_SINK_REG_SYNC_LED1 BIT(0) +#define WLED3_SINK_REG_SYNC_LED2 BIT(1) +#define WLED3_SINK_REG_SYNC_LED3 BIT(2) +#define WLED3_SINK_REG_SYNC_ALL 0x07 +#define WLED3_SINK_REG_SYNC_CLEAR 0x00 -#define PM8941_WLED_REG_SINK 0x4f -#define PM8941_WLED_REG_SINK_MASK 0xe0 -#define PM8941_WLED_REG_SINK_SHFT 0x05 +#define WLED3_SINK_REG_CURR_SINK 0x4f +#define WLED3_SINK_REG_CURR_SINK_MASK 0xe0 +#define WLED3_SINK_REG_CURR_SINK_SHFT 0x05 -/* Per-'string' registers below */ -#define PM8941_WLED_REG_STR_OFFSET 0x10 +/* WLED3 per-'string' registers below */ +#define WLED3_SINK_REG_STR_OFFSET 0x10 -#define PM8941_WLED_REG_STR_MOD_EN_BASE 0x60 -#define PM8941_WLED_REG_STR_MOD_MASK BIT(7) -#define PM8941_WLED_REG_STR_MOD_EN BIT(7) +#define WLED3_SINK_REG_STR_MOD_EN_BASE 0x60 +#define WLED3_SINK_REG_STR_MOD_MASK BIT(7) +#define WLED3_SINK_REG_STR_MOD_EN BIT(7) -#define PM8941_WLED_REG_STR_SCALE_BASE 0x62 -#define PM8941_WLED_REG_STR_SCALE_MASK 0x1f +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR 0x62 +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK 0x1f -#define PM8941_WLED_REG_STR_MOD_SRC_BASE 0x63 -#define PM8941_WLED_REG_STR_MOD_SRC_MASK 0x01 -#define PM8941_WLED_REG_STR_MOD_SRC_INT 0x00 -#define PM8941_WLED_REG_STR_MOD_SRC_EXT 0x01 +#define WLED3_SINK_REG_STR_MOD_SRC_BASE 0x63 +#define WLED3_SINK_REG_STR_MOD_SRC_MASK 0x01 +#define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00 +#define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01 -#define PM8941_WLED_REG_STR_CABC_BASE 0x66 -#define PM8941_WLED_REG_STR_CABC_MASK BIT(7) -#define PM8941_WLED_REG_STR_CABC_EN BIT(7) +#define WLED3_SINK_REG_STR_CABC_BASE 0x66 +#define WLED3_SINK_REG_STR_CABC_MASK BIT(7) +#define WLED3_SINK_REG_STR_CABC_EN BIT(7) -struct pm8941_wled_config { - u32 i_boost_limit; +struct wled_config { + u32 boost_i_limit; u32 ovp; u32 switch_freq; u32 num_strings; - u32 i_limit; + u32 string_i_limit; bool cs_out_en; bool ext_gen; bool cabc_en; }; -struct pm8941_wled { +struct wled { const char *name; struct regmap *regmap; u16 addr; - struct pm8941_wled_config cfg; + struct wled_config cfg; }; -static int pm8941_wled_update_status(struct backlight_device *bl) +static int wled_update_status(struct backlight_device *bl) { - struct pm8941_wled *wled = bl_get_data(bl); + struct wled *wled = bl_get_data(bl); u16 val = bl->props.brightness; u8 ctrl = 0; int rc; @@ -100,11 +102,11 @@ static int pm8941_wled_update_status(struct backlight_device *bl) val = 0; if (val != 0) - ctrl = PM8941_WLED_REG_MOD_EN_BIT; + ctrl = WLED3_CTRL_REG_MOD_EN_BIT; rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_MOD_EN, - PM8941_WLED_REG_MOD_EN_MASK, ctrl); + wled->addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, ctrl); if (rc) return rc; @@ -112,89 +114,89 @@ static int pm8941_wled_update_status(struct backlight_device *bl) u8 v[2] = { val & 0xff, (val >> 8) & 0xf }; rc = regmap_bulk_write(wled->regmap, - wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i, + wled->addr + WLED3_CTRL_REG_VAL_BASE + 2 * i, v, 2); if (rc) return rc; } rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_SYNC, - PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL); + wled->addr + WLED3_SINK_REG_SYNC, + WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_ALL); if (rc) return rc; rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_SYNC, - PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR); + wled->addr + WLED3_SINK_REG_SYNC, + WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_CLEAR); return rc; } -static int pm8941_wled_setup(struct pm8941_wled *wled) +static int wled_setup(struct wled *wled) { int rc; int i; rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_OVP, - PM8941_WLED_REG_OVP_MASK, wled->cfg.ovp); + wled->addr + WLED3_CTRL_REG_OVP, + WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); if (rc) return rc; rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_BOOST, - PM8941_WLED_REG_BOOST_MASK, wled->cfg.i_boost_limit); + wled->addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, wled->cfg.boost_i_limit); if (rc) return rc; rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_FREQ, - PM8941_WLED_REG_FREQ_MASK, wled->cfg.switch_freq); + wled->addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, wled->cfg.switch_freq); if (rc) return rc; if (wled->cfg.cs_out_en) { u8 all = (BIT(wled->cfg.num_strings) - 1) - << PM8941_WLED_REG_SINK_SHFT; + << WLED3_SINK_REG_CURR_SINK_SHFT; rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_SINK, - PM8941_WLED_REG_SINK_MASK, all); + wled->addr + WLED3_SINK_REG_CURR_SINK, + WLED3_SINK_REG_CURR_SINK_MASK, all); if (rc) return rc; } for (i = 0; i < wled->cfg.num_strings; ++i) { - u16 addr = wled->addr + PM8941_WLED_REG_STR_OFFSET * i; + u16 addr = wled->addr + WLED3_SINK_REG_STR_OFFSET * i; rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_MOD_EN_BASE, - PM8941_WLED_REG_STR_MOD_MASK, - PM8941_WLED_REG_STR_MOD_EN); + addr + WLED3_SINK_REG_STR_MOD_EN_BASE, + WLED3_SINK_REG_STR_MOD_MASK, + WLED3_SINK_REG_STR_MOD_EN); if (rc) return rc; if (wled->cfg.ext_gen) { rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_MOD_SRC_BASE, - PM8941_WLED_REG_STR_MOD_SRC_MASK, - PM8941_WLED_REG_STR_MOD_SRC_EXT); + addr + WLED3_SINK_REG_STR_MOD_SRC_BASE, + WLED3_SINK_REG_STR_MOD_SRC_MASK, + WLED3_SINK_REG_STR_MOD_SRC_EXT); if (rc) return rc; } rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_SCALE_BASE, - PM8941_WLED_REG_STR_SCALE_MASK, - wled->cfg.i_limit); + addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR, + WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); if (rc) return rc; rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_CABC_BASE, - PM8941_WLED_REG_STR_CABC_MASK, + addr + WLED3_SINK_REG_STR_CABC_BASE, + WLED3_SINK_REG_STR_CABC_MASK, wled->cfg.cabc_en ? - PM8941_WLED_REG_STR_CABC_EN : 0); + WLED3_SINK_REG_STR_CABC_EN : 0); if (rc) return rc; } @@ -202,9 +204,9 @@ static int pm8941_wled_setup(struct pm8941_wled *wled) return 0; } -static const struct pm8941_wled_config pm8941_wled_config_defaults = { - .i_boost_limit = 3, - .i_limit = 20, +static const struct wled_config wled3_config_defaults = { + .boost_i_limit = 3, + .string_i_limit = 20, .ovp = 2, .switch_freq = 5, .num_strings = 0, @@ -213,55 +215,55 @@ static int pm8941_wled_setup(struct pm8941_wled *wled) .cabc_en = false, }; -struct pm8941_wled_var_cfg { +struct wled_var_cfg { const u32 *values; u32 (*fn)(u32); int size; }; -static const u32 pm8941_wled_i_boost_limit_values[] = { +static const u32 wled3_boost_i_limit_values[] = { 105, 385, 525, 805, 980, 1260, 1400, 1680, }; -static const struct pm8941_wled_var_cfg pm8941_wled_i_boost_limit_cfg = { - .values = pm8941_wled_i_boost_limit_values, - .size = ARRAY_SIZE(pm8941_wled_i_boost_limit_values), +static const struct wled_var_cfg wled3_boost_i_limit_cfg = { + .values = wled3_boost_i_limit_values, + .size = ARRAY_SIZE(wled3_boost_i_limit_values), }; -static const u32 pm8941_wled_ovp_values[] = { +static const u32 wled3_ovp_values[] = { 35, 32, 29, 27, }; -static const struct pm8941_wled_var_cfg pm8941_wled_ovp_cfg = { - .values = pm8941_wled_ovp_values, - .size = ARRAY_SIZE(pm8941_wled_ovp_values), +static const struct wled_var_cfg wled3_ovp_cfg = { + .values = wled3_ovp_values, + .size = ARRAY_SIZE(wled3_ovp_values), }; -static u32 pm8941_wled_num_strings_values_fn(u32 idx) +static u32 wled3_num_strings_values_fn(u32 idx) { return idx + 1; } -static const struct pm8941_wled_var_cfg pm8941_wled_num_strings_cfg = { - .fn = pm8941_wled_num_strings_values_fn, +static const struct wled_var_cfg wled3_num_strings_cfg = { + .fn = wled3_num_strings_values_fn, .size = 3, }; -static u32 pm8941_wled_switch_freq_values_fn(u32 idx) +static u32 wled3_switch_freq_values_fn(u32 idx) { return 19200 / (2 * (1 + idx)); } -static const struct pm8941_wled_var_cfg pm8941_wled_switch_freq_cfg = { - .fn = pm8941_wled_switch_freq_values_fn, +static const struct wled_var_cfg wled3_switch_freq_cfg = { + .fn = wled3_switch_freq_values_fn, .size = 16, }; -static const struct pm8941_wled_var_cfg pm8941_wled_i_limit_cfg = { +static const struct wled_var_cfg wled3_string_i_limit_cfg = { .size = 26, }; -static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, u32 idx) +static u32 wled3_values(const struct wled_var_cfg *cfg, u32 idx) { if (idx >= cfg->size) return UINT_MAX; @@ -272,9 +274,9 @@ static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, u32 idx) return idx; } -static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) +static int wled_configure(struct wled *wled, struct device *dev) { - struct pm8941_wled_config *cfg = &wled->cfg; + struct wled_config *cfg = &wled->cfg; u32 val; int rc; u32 c; @@ -284,32 +286,32 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) const struct { const char *name; u32 *val_ptr; - const struct pm8941_wled_var_cfg *cfg; + const struct wled_var_cfg *cfg; } u32_opts[] = { { "qcom,current-boost-limit", - &cfg->i_boost_limit, - .cfg = &pm8941_wled_i_boost_limit_cfg, + &cfg->boost_i_limit, + .cfg = &wled3_boost_i_limit_cfg, }, { "qcom,current-limit", - &cfg->i_limit, - .cfg = &pm8941_wled_i_limit_cfg, + &cfg->string_i_limit, + .cfg = &wled3_string_i_limit_cfg, }, { "qcom,ovp", &cfg->ovp, - .cfg = &pm8941_wled_ovp_cfg, + .cfg = &wled3_ovp_cfg, }, { "qcom,switching-freq", &cfg->switch_freq, - .cfg = &pm8941_wled_switch_freq_cfg, + .cfg = &wled3_switch_freq_cfg, }, { "qcom,num-strings", &cfg->num_strings, - .cfg = &pm8941_wled_num_strings_cfg, + .cfg = &wled3_num_strings_cfg, }, }; const struct { @@ -332,7 +334,7 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) if (rc) wled->name = dev->of_node->name; - *cfg = pm8941_wled_config_defaults; + *cfg = wled3_config_defaults; for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) { rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); if (rc == -EINVAL) { @@ -344,7 +346,7 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) c = UINT_MAX; for (j = 0; c != val; j++) { - c = pm8941_wled_values(u32_opts[i].cfg, j); + c = wled3_values(u32_opts[i].cfg, j); if (c == UINT_MAX) { dev_err(dev, "invalid value for '%s'\n", u32_opts[i].name); @@ -366,15 +368,15 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) return 0; } -static const struct backlight_ops pm8941_wled_ops = { - .update_status = pm8941_wled_update_status, +static const struct backlight_ops wled_ops = { + .update_status = wled_update_status, }; -static int pm8941_wled_probe(struct platform_device *pdev) +static int wled_probe(struct platform_device *pdev) { struct backlight_properties props; struct backlight_device *bl; - struct pm8941_wled *wled; + struct wled *wled; struct regmap *regmap; u32 val; int rc; @@ -391,42 +393,42 @@ static int pm8941_wled_probe(struct platform_device *pdev) wled->regmap = regmap; - rc = pm8941_wled_configure(wled, &pdev->dev); + rc = wled_configure(wled, &pdev->dev); if (rc) return rc; - rc = pm8941_wled_setup(wled); + rc = wled_setup(wled); if (rc) return rc; - val = PM8941_WLED_DEFAULT_BRIGHTNESS; + val = WLED_DEFAULT_BRIGHTNESS; of_property_read_u32(pdev->dev.of_node, "default-brightness", &val); memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_RAW; props.brightness = val; - props.max_brightness = PM8941_WLED_REG_VAL_MAX; + props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX; bl = devm_backlight_device_register(&pdev->dev, wled->name, &pdev->dev, wled, - &pm8941_wled_ops, &props); + &wled_ops, &props); return PTR_ERR_OR_ZERO(bl); }; -static const struct of_device_id pm8941_wled_match_table[] = { +static const struct of_device_id wled_match_table[] = { { .compatible = "qcom,pm8941-wled" }, {} }; -MODULE_DEVICE_TABLE(of, pm8941_wled_match_table); +MODULE_DEVICE_TABLE(of, wled_match_table); -static struct platform_driver pm8941_wled_driver = { - .probe = pm8941_wled_probe, +static struct platform_driver wled_driver = { + .probe = wled_probe, .driver = { - .name = "pm8941-wled", - .of_match_table = pm8941_wled_match_table, + .name = "qcom,wled", + .of_match_table = wled_match_table, }, }; -module_platform_driver(pm8941_wled_driver); +module_platform_driver(wled_driver); -MODULE_DESCRIPTION("pm8941 wled driver"); +MODULE_DESCRIPTION("Qualcomm WLED driver"); MODULE_LICENSE("GPL v2");
Rename the PM8941* references as WLED3 to make the driver generic and have WLED support for other PMICs. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> --- Changes from V3: - Changed the MODULE_DESCRIPTION drivers/video/backlight/qcom-wled.c | 248 ++++++++++++++++++------------------ 1 file changed, 125 insertions(+), 123 deletions(-)