diff mbox

[2/2] backlight: pwm_bl: Check the pwm state for initial backlight power state

Message ID 20160930070259.5710-3-peter.ujfalusi@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Ujfalusi Sept. 30, 2016, 7:02 a.m. UTC
If the pwm is not enabled the backlight initially should not be enabled
either if we have booted with DT and there is a phandle pointing to the
backlight node.

The patch extends the checks to decide if we should keep the backlight off
initially.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/video/backlight/pwm_bl.c | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Lee Jones Oct. 26, 2016, 12:13 p.m. UTC | #1
On Fri, 30 Sep 2016, Peter Ujfalusi wrote:

> If the pwm is not enabled the backlight initially should not be enabled
> either if we have booted with DT and there is a phandle pointing to the
> backlight node.
> 
> The patch extends the checks to decide if we should keep the backlight off
> initially.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
>  drivers/video/backlight/pwm_bl.c | 4 ++++
>  1 file changed, 4 insertions(+)

Makes sense to me.

I'm going to apply this until someone screams at me.

> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> index 9bc4715bf116..e4326bbf807f 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -223,6 +223,10 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
>  	if (!regulator_is_enabled(pb->power_supply))
>  		return FB_BLANK_POWERDOWN;
>  
> +	/* The pwm is disabled, keep it like this */
> +	if (!pwm_is_enabled(pb->pwm))
> +		return FB_BLANK_POWERDOWN;
> +
>  	return FB_BLANK_UNBLANK;
>  }
>
diff mbox

Patch

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 9bc4715bf116..e4326bbf807f 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -223,6 +223,10 @@  static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
 	if (!regulator_is_enabled(pb->power_supply))
 		return FB_BLANK_POWERDOWN;
 
+	/* The pwm is disabled, keep it like this */
+	if (!pwm_is_enabled(pb->pwm))
+		return FB_BLANK_POWERDOWN;
+
 	return FB_BLANK_UNBLANK;
 }