@@ -25,7 +25,6 @@
#include <linux/gpio.h>
-#include <asm/mach-jz4740/gpio.h>
#include <asm/mach-jz4740/jz4740_nand.h>
#define JZ_REG_NAND_CTRL 0x50
@@ -310,34 +309,20 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
uint8_t *nand_dev_id)
{
int ret;
- int gpio;
- char gpio_name[9];
char res_name[6];
uint32_t ctrl;
struct nand_chip *chip = &nand->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
- /* Request GPIO port. */
- gpio = JZ_GPIO_MEM_CS0 + bank - 1;
- sprintf(gpio_name, "NAND CS%d", bank);
- ret = gpio_request(gpio, gpio_name);
- if (ret) {
- dev_warn(&pdev->dev,
- "Failed to request %s gpio %d: %d\n",
- gpio_name, gpio, ret);
- goto notfound_gpio;
- }
-
/* Request I/O resource. */
sprintf(res_name, "bank%d", bank);
ret = jz_nand_ioremap_resource(pdev, res_name,
&nand->bank_mem[bank - 1],
&nand->bank_base[bank - 1]);
if (ret)
- goto notfound_resource;
+ return ret;
/* Enable chip in bank. */
- jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0);
ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
@@ -377,12 +362,8 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
- jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
nand->bank_base[bank - 1]);
-notfound_resource:
- gpio_free(gpio);
-notfound_gpio:
return ret;
}
@@ -503,7 +484,6 @@ static int jz_nand_probe(struct platform_device *pdev)
err_unclaim_banks:
while (chipnr--) {
unsigned char bank = nand->banks[chipnr];
- gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
nand->bank_base[bank - 1]);
}
@@ -530,7 +510,6 @@ static int jz_nand_remove(struct platform_device *pdev)
if (bank != 0) {
jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
nand->bank_base[bank - 1]);
- gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
}
}
Before, this NAND driver would set itself the configuration of the chip-select pins for the various NAND banks. Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on the pins being properly configured before the driver probes. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/mtd/nand/jz4740_nand.c | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-) v2: No changes v3: No changes