[2/2] pwm-backlight: Add support for pwm-delay-us property

Commit Message

Enric Balletbo i Serra June 28, 2017, 11:16 a.m. UTC

From: huang lin <[e-mail]>

Some panel backlight (i.e. N116BGE-L41), in their power sequence
specifications, request a delay between PWM signal and the backlight
enable signal, so use the pwm-delay-us property to meet the timing.

Signed-off-by: huang lin <[e-mail]>
Signed-off-by: Enric Balletbo i Serra <[e-mail]>
---
 drivers/video/backlight/pwm_bl.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

Patch

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 002f1ce..c5c4ef0 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -10,6 +10,7 @@ 
  * published by the Free Software Foundation.
  */
 
+#include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio.h>
 #include <linux/module.h>
@@ -30,6 +31,7 @@  struct pwm_bl_data {
 	unsigned int		period;
 	unsigned int		lth_brightness;
 	unsigned int		*levels;
+	unsigned int		pwm_delay;
 	bool			enabled;
 	struct regulator	*power_supply;
 	struct gpio_desc	*enable_gpio;
@@ -54,10 +56,14 @@  static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)
 	if (err < 0)
 		dev_err(pb->dev, "failed to enable power supply\n");
 
+	pwm_enable(pb->pwm);
+
+	if (pb->pwm_delay)
+		usleep_range(pb->pwm_delay, pb->pwm_delay + 2000);
+
 	if (pb->enable_gpio)
 		gpiod_set_value_cansleep(pb->enable_gpio, 1);
 
-	pwm_enable(pb->pwm);
 	pb->enabled = true;
 }
 
@@ -66,12 +72,15 @@  static void pwm_backlight_power_off(struct pwm_bl_data *pb)
 	if (!pb->enabled)
 		return;
 
-	pwm_config(pb->pwm, 0, pb->period);
-	pwm_disable(pb->pwm);
-
 	if (pb->enable_gpio)
 		gpiod_set_value_cansleep(pb->enable_gpio, 0);
 
+	if (pb->pwm_delay)
+		usleep_range(pb->pwm_delay, pb->pwm_delay + 2000);
+
+	pwm_config(pb->pwm, 0, pb->period);
+	pwm_disable(pb->pwm);
+
 	regulator_disable(pb->power_supply);
 	pb->enabled = false;
 }
@@ -273,6 +282,7 @@  static int pwm_backlight_probe(struct platform_device *pdev)
 	pb->dev = &pdev->dev;
 	pb->enabled = false;
 
+	of_property_read_u32(pdev->dev.of_node, "pwm-delay-us", &pb->pwm_delay);
 	pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
 						  GPIOD_ASIS);
 	if (IS_ERR(pb->enable_gpio)) {